Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-22 13:31:40
From: hbent
Description: iMac G3/333 (Grape)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GRAPE) #5: Tue Dec 18 17:16:42 EST 2018
root@grape:/usr/src/sys/arch/macppc/compile/GRAPE
total memory = 384 MB
avail memory = 364 MB
timecounter: Timecounters tick every 10.000 msec
found heathrow PIC at 80800000
bootpath: /pci/mac-io/ethernet:0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 0x8050c0a4<EMCP,NAP,DPM,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
cpu0: 333.33 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2.5:1 ratio
memory0 at mainbus0
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40)
pchb0: L2 cache: 256K, uniprocessor/none mode
obio0 at pci0 dev 16 function 0: addr 0x80800000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
awacs0: speaker
audio0 at awacs0: full duplex, playback, capture, mmap
awacs0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
awacs0: Latency: 278 milliseconds
fdc at obio0 offset 0x15000 not configured
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x21000 irq 14, edge triggered: DMA transfer
atabus1 at wdc1 channel 0
bm0 at obio0 offset 0x11000 irq 42,33: address [_MAC_XXXXXXXXXX]
lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nvram0 at obio0 offset 0x60000
machfb0 at pci0 dev 18 function 0found EDID property...
: ATI Technologies 3D Rage Pro (rev. 0x5c)
machfb0: using MMIO aperture
machfb0: 16 MB aperture at 0x81000000, 4 KB registers at 0x80881000
machfb0: 128 KB ROM at 0x00000000
ref_div: 33
mclk_fb_div: 228
minref: 450 m: 31
machfb0: 6144 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz
post_div: 4 log2_post_div: 2 mclk_div: 228
target: 50000 output: 49896
machfb0: initializing the DSP
xclks_per_qw 253 253
machfb0: initial resolution 640x480 at 8 bpp
wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for machfb0 unsupported
ohci0 at pci0 dev 20 function 0: Lucent Technologies USB Host Controller (rev. 0x12)
ohci0: interrupting at irq 28
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
vmmask 79f80000 schedmask 7ff80000 highmask 7ff80000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: Lucent Technologies (0x11c1) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at uhub0 port 2: Alps Electric (0x5ac) Hub in Apple USB Keyboard (0x1001), class 9/0, rev 1.10/2.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
wd0 at atabus0 drive 0
wd0: <Maxtor 90648D3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6179 MB, 12556 cyl, 16 head, 63 sec, 512 bytes/sect x 12656448 sectors
dk0 at wd0: "untitled", 12655215 blocks at 1216, type: hfs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-175, , 5ADF> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Alps Electric (0x5ac) Apple USB Keyboard (0x201), rev 1.10/1.02, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
swwdog0: software watchdog initialized
WARNING: 5 errors while detecting hardware; check system log.
boot device: bm0
root on bm0