Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-22 13:37:50
From: hbent
Description: ASUS A8N32-SLI-Deluxe
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.72 (AELFRIC) #2: Tue Aug 19 16:59:16 EDT 2008
[_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/scratch/src/obj/sys/arch/i386/compile/AELFRIC
total memory = 2047 MB
avail memory = 2006 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 1808MHz, id 0x20f32
cpu0: AMD Cool`n'Quiet Technology 1800 MHz
cpu0: available frequencies (Mhz): 1000 1800
cpu0: erratum 89 present
cpu0: WARNING: errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu1 at mainbus0 apid 1: AMD 686-class, 1808MHz, id 0x20f32
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,01000708>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at acpi0 (COPR, PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
fdc0 at acpi0 (FDC, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
mpu0 at acpi0 (MIDI, PNPB006)
mpu0: io 0x330-0x331 irq 5
midi1 at mpu0: Roland MPU-401 MIDI UART (CPU-intensive output)
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
pckbc0 at acpi0 (PS2K, PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer0: attached to pcppi0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x02f4 (RAM memory, revision 0xa2) at pci0 dev 0 function 0 not configured
vendor 0x10de product 0x02fa (RAM memory, revision 0xa2) at pci0 dev 0 function 1 not configured
vendor 0x10de product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not configured
vendor 0x10de product 0x02f8 (RAM memory, revision 0xa2) at pci0 dev 0 function 3 not configured
vendor 0x10de product 0x02f9 (RAM memory, revision 0xa2) at pci0 dev 0 function 4 not configured
vendor 0x10de product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not configured
vendor 0x10de product 0x027f (RAM memory, revision 0xa2) at pci0 dev 0 function 6 not configured
vendor 0x10de product 0x027e (RAM memory, revision 0xa2) at pci0 dev 0 function 7 not configured
ppb0 at pci0 dev 2 function 0: vendor 0x10de product 0x02fc (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: vendor 0x10de product 0x02fd (rev. 0xa1)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 4 function 0: vendor 0x10de product 0x02fb (rev. 0xa1)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci3 dev 0 function 0: vendor 0x10de product 0x0141 (rev. 0xa2)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x50, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa4) at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0
pcib0: vendor 0x10de product 0x0050 (rev. 0xa4)
nfsmbc0 at pci0 dev 10 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM memory, no parity or ECC, 1024MB, 500MHz, PC-4000
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 4.0ns cycle time
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM memory, no parity or ECC, 1024MB, 500MHz, PC-4000
spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 4.0ns cycle time
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 11 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 11 function 1: vendor 0x10de product 0x005b (rev. 0xa4)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
auich0 at pci0 dev 13 function 0: nForce4 AC-97 Audio
LACI: Picked IRQ 22 with weight 0
auich0: interrupting at ioapic0 pin 22
auich0: ac97: Avance Logic ALC850 codec; no 3D stereo
auich0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
viaide0 at pci0 dev 15 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf3)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 16 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA0: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 17 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSA1: Picked IRQ 20 with weight 1
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb3 at pci0 dev 18 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
bktr0 at pci4 dev 8 function 0
LNKC: Picked IRQ 16 with weight 0
bktr0: interrupting at ioapic0 pin 16
bktr0: Hauppauge Model 61111 A MB
bktr0: Detected a MSP3430G-A1 at 0x80
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, msp3400c stereo.
vendor 0x109e product 0x0878 (miscellaneous multimedia, revision 0x02) at pci4 dev 8 function 1 not configured
fwohci0 at pci4 dev 11 function 0: vendor 0x104c product 0x8023 (rev. 0x00)
LNKA: Picked IRQ 17 with weight 0
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:6b:a8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 19 function 0: vendor 0x10de product 0x0057 (rev. 0xa3)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 22 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 23 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
audio0 at auich0: full duplex, independent
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
wd1 at atabus0 drive 0: <Maxtor 7Y250P0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2 at atabus0 drive 1: <HDT722516DLAT80>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
viaide1 port 0: device present, speed: 3.0Gb/s
viaide1 port 1: device present, speed: 1.5Gb/s
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3550A, , 1.05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd3 at atabus2 drive 0: <WDC WD2500KS-00MJB0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd0 at atabus3 drive 0: <WDC WD2000JD-22HBC0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Kensington MIAB Optical, rev 1.10/2.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev1 at uhub0 port 4 configuration 1 interface 0
uhidev1: Griffin Technology, Inc. iMate, USB To ADB Adaptor, rev 1.00/3.30, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 4 configuration 1 interface 1
uhidev2: Griffin Technology, Inc. iMate, USB To ADB Adaptor, rev 1.00/3.30, addr 3, iclass 3/1
ums1 at uhidev2: 3 buttons
wsmouse1 at ums1 mux 0