Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-22 13:44:10
From: hbent
Description: Gateway 6400
NetBSD 3.99.17 (GENERIC.MP) #0: Mon Apr 3 11:10:37 EDT 2006
root@hbent3:/usr/obj/src-current/sys/arch/i386/compile/GENERIC.MP
total memory = 895 MB
avail memory = 870 MB
BIOS32 rev. 0 found at 0xfdb90
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (AMI CNB30LE )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (686-class), 1000.08 MHz, id 0x68a
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXX]
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pci1 at pchb1 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
amr0 at pci1 dev 3 function 0: AMI RAID <Series 428>
amr0: interrupting at ioapic1 pin 6 (irq 3)
amr0: firmware <U.84>, BIOS <1.63>, 64MB RAM
ld0 at amr0 unit 0: RAID 5, offline
ld0: disabled
esiop0 at pci1 dev 5 function 0: Symbios Logic 53c1010-33 (ultra3-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ioapic1 pin 8 (irq 5)
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci1 dev 5 function 1: Symbios Logic 53c1010-33 (ultra3-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ioapic1 pin 9 (irq 11)
scsibus1 at esiop1: 16 targets, 8 luns per target
fxp0 at pci0 dev 2 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic1 pin 4 (irq 9)
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 7 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x04)
ohci0: interrupting at ioapic0 pin 10 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <WDC WD400BB-53AUA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <IC35L060AVV207-0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 58644 MB, 119150 cyl, 16 head, 63 sec, 512 bytes/sect x 120103200 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(rccide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <TDK CDRW241040X, , 6z34> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd2 at atabus1 drive 0: <ST380021A>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(rccide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd0(rccide0:1:1): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST336704LW, 0002> disk fixed
sd0: 35003 MB, 14100 cyl, 12 head, 423 sec, 512 bytes/sect x 71687369 sectors
sd0: sync (12.50ns offset 62), 16-bit (160.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
fxp0: link state changed to DOWN
fxp0: Microcode loaded: int delay: 1000 usec, max bundle: 6
fxp0: link state changed to UP