Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-05-26 16:02:38
From: yang
Description: NetBSD/aarch64 8.99.41, Raspberry Pi 3B plus
------------------------------------------
kern_vtopdiff = 0xffffffbfffe00000
physical_start = 0x0000000000001000
kernel_start_phys = 0x0000000000200000
kernel_end_phys = 0x0000000000f6f000
msgbuf = 0x000000003b3f0000
physical_end = 0x000000003b400000
VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000
kernel_start_l2 = 0xffffffc000000000
kernel_start = 0xffffffc000000000
kernel_end = 0xffffffc000d6f000
pagetables = 0xffffffc000d6f000
pagetables_end = 0xffffffc000d77000
kernel_end_l2 = 0xffffffc000e00000
module_start = 0xffffffc000e00000
module_end = 0xffffffc002e00000
(kernel va area)
(devmap va area) = 0xfffffffff0000000
VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000
------------------------------------------
mpstart
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.41 (GENERIC64) #0: Sat May 25 11:29:15 UTC 2019
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
total memory = 934 MB
avail memory = 900 MB
timecounter: Timecounters tick every 10.000 msec
armfdt0 (root)
simplebus0 at armfdt0: Raspberry Pi 3 Model B Plus Rev 1.3
simplebus1 at simplebus0
simplebus2 at simplebus0
cpus0 at simplebus0
simplebus3 at simplebus0
cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu0: package 0, core 0, smt 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64
cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu1: package 0, core 1, smt 0
cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu2: package 0, core 2, smt 0
cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu3: package 0, core 3, smt 0
simplebus4 at simplebus1
bcmicu0 at simplebus1
bcmicu1 at simplebus1: Multiprocessor
fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
bcmcprman0 at simplebus1: BCM283x Clock Controller
bcmaux0 at simplebus1
fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on local_intc irq 3
armgtmr0 at gtmr0: ARM Generic Timer (19200 kHz)
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
plcom0 at simplebus1: ARM PL011 UART
plcom0: txfifo disabled
plcom0: interrupting on icu irq 185
com0 at simplebus1: BCM AUX UART, working fifo
com0: console
com0: interrupting on icu irq 157
bcmgpio0 at simplebus1: GPIO controller
bcmgpio0: pins 0..31 interrupting on icu irq 177
bcmgpio0: pins 32..54 interrupting on icu irq 178
gpio0 at bcmgpio0: 54 pins
bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs
bsciic0 at simplebus1: Broadcom Serial Controller
iic0 at bsciic0: I2C bus
bcmmbox0 at simplebus1: VC mailbox
bcmmbox0: interrupting on icu irq 193
vcmbox0 at bcmmbox0
sdhost0 at simplebus1: SD HOST controller
sdhost0: interrupting on icu irq 184
bsciic1 at simplebus1: Broadcom Serial Controller
iic1 at bsciic1: I2C bus
sdhc0 at simplebus1: SDHC controller
sdhc0: interrupting on icu irq 190
bsciic2 at simplebus1: Broadcom Serial Controller
iic2 at bsciic2: I2C bus
dwctwo0 at simplebus1: USB controller
dwctwo0: interrupting on icu irq 137
genfb0 at simplebus1Vendor: [TSB] Toshiba
Product: [0108] TOSHIBA-TV
Serial number: 01010101
Manufactured 2013 Week 255
EDID Version 1.3
EDID Comment:
Video Input: 80
Digital
Gamma: 2.20
Max Size: 70 cm x 39 cm
Features: a
RGB
Preferred timing
Chroma Info:
Red X: 0.656
Red Y: 0.656
Grn X: 0.265
Grn Y: 0.596
Blu X: 0.136
Blu Y: 0.096
Wht X: 0.296
Wht Y: 0.347
Range:
Horizontal: 15 - 81 kHz
Vertical: 24 - 75 Hz
Max Dot Clock: 149 MHz
Video modes:
1920x1080 @ 50Hz (148500 2448 2492 2640 1084 1089 1125 +H +V)
1920x540 @ 50Hz (74250 2448 2492 2640 542 547 562 +H +V)
Preferred mode: 1920x1080 @ 50Hz
Number of extension blocks: 1
rpi_fb_init: addr = 0xfe402000 size = 8355840
rpi_fb_init: depth = 32
rpi_fb_init: pitch = 7680
rpi_fb_init: width = 1920 height = 1080
rpi_fb_init: vwidth = 1920 vheight = 1080
: switching to framebuffer console
genfb0: framebuffer at 0xfe402000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
armpmu0 at simplebus0: Performance Monitor Unit
gpioleds0 at simplebus0: ACT
watchdog0 at simplebus1: Power management, Reset and Watchdog controller
bcmrng0 at simplebus1: RNG
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu_boot_secondary_processors: writing mbox with 0xe
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64
cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64
cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64
cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu_boot_secondary_processors: secondary processors hatched
sdmmc0 at sdhost0
sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
usb0 at dwctwo0: USB revision 2.0
armpmu0: interrupting on local_intc irq 9
sdhc0: cmd timeout error
sdmmc0: sdmmc_mem_enable failed with error 5
sdmmc0: autoconfiguration error: couldn't enable card: 5
uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
sdmmc1: autoconfiguration error: unknown tuple code 0x91, length 3
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
(manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc1 function 3 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 2
uhub1: multiple transaction translators
uhub1: 4 ports with 3 removable, self powered
uhub2 at uhub1 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 3
uhub2: multiple transaction translators
uhub2: 3 ports with 2 removable, self powered
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: SanDisk (0x781) Ultra Fit (0x5583), rev 2.10/1.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra Fit, 1.00> disk removable
sd0: 29328 MB, 59587 cyl, 16 head, 63 sec, 512 bytes/sect x 60063744 sectors
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 5, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 5, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhub0: autoconfiguration error: illegal enable change, port 1
mue0 at uhub2 port 1
mue0: vendor 0424 (0x424) product 7800 (0x7800), rev 2.10/3.00, addr 6
mue0: LAN7800 id 0x7800 rev 0x2
mue0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at mue0 phy 1: OUI 0x00800f, model 0x0013, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
WARNING: 4 errors while detecting hardware; check system log.
boot device: <unknown>
unknown device major 0xffffffffffffffff
root device: sd0
dump device (default sd0b):
file system (default generic):
dumps on sd0b
root file system type: ffs
kern.module.path=/stand/evbarm/8.99.41/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init):
init: trying /sbin/init
WARNING: negative runtime; monotonic clock has gone backwards
wsdisplay0: screen 4 added (default, vt100 emulation)