Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-06-23 08:01:25
From: sehnsucht
Description: NetBSD/aarch64 8.99.26 on Raspberry Pi3 Model B
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 8.99.26 (GENERIC64.2018-12-01 00:00 UTC) #2: Sat Dec 1 10:35:12 JST 2018 [ 1.000000] xxx@xxx.xxx:/prj/prj09/NetBSD/Build/src/sys/arch/evbarm/compile/GENERIC64 [ 1.000000] total memory = 934 MB [ 1.000000] avail memory = 904 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus1 [ 1.000000] cpus0 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64 [ 1.000000] cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.000000] cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] simplebus4 at simplebus0 [ 1.000000] bcmicu0 at simplebus1 [ 1.000000] bcmicu1 at simplebus1: Multiprocessor [ 1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) [ 1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.000000] bcmaux0 at simplebus1 [ 1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on local_intc irq 3 [ 1.000000] armgtmr0 at gtmr0: ARM Generic Timer (19200 kHz) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500 [ 1.000003] plcom0 at simplebus1: ARM PL011 UART [ 1.000003] plcom0: txfifo disabled [ 1.000003] plcom0: interrupting on icu irq 185 [ 1.000003] com0 at simplebus1: BCM AUX UART, working fifo [ 1.000003] com0: console [ 1.000003] com0: interrupting on icu irq 157 [ 1.000003] /soc/thermal@7e212000 at simplebus1 not configured [ 1.000003] /soc/dsi@7e209000 at simplebus1 not configured [ 1.000003] bcmgpio0 at simplebus1: GPIO controller [ 1.000003] bcmgpio0: pins 0..31 interrupting on icu irq 177 [ 1.000003] bcmgpio0: pins 32..54 interrupting on icu irq 178 [ 1.000003] gpio0 at bcmgpio0: 54 pins [ 1.000003] /soc/firmware/gpio at simplebus3 not configured [ 1.000003] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 [ 1.000003] /soc/power at simplebus1 not configured [ 1.000003] mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs [ 1.000003] bsciic0 at simplebus1: Broadcom Serial Controller [ 1.000003] iic0 at bsciic0: I2C bus [ 1.000003] /phy at simplebus0 not configured [ 1.000003] bcmmbox0 at simplebus1: VC mailbox [ 1.000003] bcmmbox0: interrupting on icu irq 193 [ 1.000003] vcmbox0 at bcmmbox0 [ 1.000003] sdhost0 at simplebus1: SD HOST controller [ 1.000003] sdhost0: interrupting on icu irq 184 [ 1.000003] bsciic1 at simplebus1: Broadcom Serial Controller [ 1.000003] iic1 at bsciic1: I2C bus [ 1.000003] /soc/pwm@7e20c000 at simplebus1 not configured [ 1.000003] sdhc0 at simplebus1: SDHC controller [ 1.000003] sdhc0: interrupting on icu irq 190 [ 1.000003] bsciic2 at simplebus1: Broadcom Serial Controller [ 1.000003] iic2 at bsciic2: I2C bus [ 1.000003] /soc/vec@7e806000 at simplebus1 not configured [ 1.000003] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.000003] dwctwo0 at simplebus1: USB controller [ 1.000003] dwctwo0: interrupting on icu irq 137 [ 1.000003] /soc/gpu at simplebus1 not configured [ 1.000003] genfb0 at simplebus1no data for est. mode 640x480x67 [ 1.000003] Vendor: [GNR] [ 1.000003] Product: [0000] TB902W [ 1.000003] Serial number: 000776 [ 1.000003] Manufactured 2008 Week 38 [ 1.000003] EDID Version 1.3 [ 1.000003] EDID Comment: [ 1.000003] Video Input: a0 [ 1.000003] Digital [ 1.000003] Gamma: 2.20 [ 1.000003] Max Size: 40 cm x 25 cm [ 1.000003] Features: ba [ 1.000003] DPMS standby [ 1.000003] DPMS active-off [ 1.000003] Undefined monitor type [ 1.000003] Preferred timing [ 1.000003] Chroma Info: [ 1.000003] Red X: 0.637 [ 1.000003] Red Y: 0.637 [ 1.000003] Grn X: 0.286 [ 1.000003] Grn Y: 0.592 [ 1.000003] Blu X: 0.140 [ 1.000003] Blu Y: 0.078 [ 1.000003] Wht X: 0.311 [ 1.000003] Wht Y: 0.330 [ 1.000003] Range: [ 1.000003] Horizontal: 30 - 80 kHz [ 1.000003] Vertical: 56 - 76 Hz [ 1.000003] Max Dot Clock: 140 MHz [ 1.000003] Video modes: [ 1.000003] 720x400 @ 70Hz (28320 738 846 900 412 414 449 -H +V) [ 1.000003] 640x480 @ 60Hz (25175 656 752 800 490 492 525 -H -V) [ 1.000003] 640x480 @ 73Hz (31500 664 704 832 489 492 520 -H -V) [ 1.000003] 640x480 @ 75Hz (31500 656 720 840 481 484 500 -H -V) [ 1.000003] 800x600 @ 56Hz (36000 824 896 1024 601 603 625 +H +V) [ 1.000003] 800x600 @ 60Hz (40000 840 968 1056 601 605 628 +H +V) [ 1.000003] 800x600 @ 72Hz (50000 856 976 1040 637 643 666 +H +V) [ 1.000003] 800x600 @ 75Hz (49500 816 896 1056 601 604 625 +H +V) [ 1.000003] 832x624 @ 75Hz (57284 864 928 1152 625 628 667 -H -V) [ 1.000003] 1024x768 @ 60Hz (65000 1048 1184 1344 771 777 806 -H -V) [ 1.000003] 1024x768 @ 70Hz (75000 1048 1184 1328 771 777 806 -H -V) [ 1.000003] 1024x768 @ 75Hz (78750 1040 1136 1312 769 772 800 +H +V) [ 1.000003] 1280x1024 @ 75Hz (135000 1296 1440 1688 1025 1028 1066 +H +V) [ 1.000003] 1280x1024 @ 60Hz (108000 1328 1440 1688 1025 1028 1066 +H +V) [ 1.000003] 1280x960 @ 60Hz (108000 1376 1488 1800 961 964 1000 +H +V) [ 1.000003] 1152x864 @ 75Hz (108000 1216 1344 1600 865 868 900 +H +V) [ 1.000003] 1440x900 @ 60Hz (106500 1520 1672 1904 903 909 934 -H +V) [ 1.000003] 1440x900 @ 75Hz (136492 1536 1688 1936 901 904 940 +H +V) [ 1.000003] Preferred mode: 1440x900 @ 60Hz [ 1.000003] Number of extension blocks: 1 [ 1.000003] rpi_fb_init: addr = 0xfe6f8000 size = 5253120 [ 1.000003] rpi_fb_init: depth = 32 [ 1.000003] rpi_fb_init: pitch = 5760 [ 1.000003] rpi_fb_init: width = 1440 height = 900 [ 1.000003] rpi_fb_init: vwidth = 1440 vheight = 900 [ 1.000003] : switching to framebuffer console [ 1.000003] genfb0: framebuffer at 0xfe6f8000, size 1440x900, depth 32, stride 5760 [ 1.000003] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.000003] wsmux1: connecting to wsdisplay0 [ 1.000003] wsdisplay0: screen 1-3 added (default, vt100 emulation) [ 1.000003] /soc/vchiq at simplebus1 not configured [ 1.000003] gpioleds0 at simplebus0: [ 1.000003] /soc/timer@7e003000 at simplebus1 not configured [ 1.000003] watchdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.000003] bcmrng0 at simplebus1: RNG [ 1.000003] /soc/mailbox@7e00b840 at simplebus1 not configured [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] cpu_boot_secondary_processors: writing mbox with 0xe [ 1.000003] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.586102] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.596088] cpu3: Dcache line 64, Icache line 64 [ 1.606089] cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.606089] cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.616089] cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.636090] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.636090] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.656091] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.666092] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.666092] cpu1: Dcache line 64, Icache line 64 [ 1.676092] cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.686093] cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.696094] cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.706094] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.716095] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.726095] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.736096] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.746096] cpu2: Dcache line 64, Icache line 64 [ 1.756097] cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.766098] cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.776098] cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.786099] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.796099] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.816099] cpu_boot_secondary_processors: secondary processors hatched [ 1.866103] sdmmc0 at sdhost0 [ 1.866103] sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.887790] sdmmc1 at sdhc0 slot 0 [ 1.887790] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.887790] usb0 at dwctwo0: USB revision 2.0 [ 2.016597] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.026599] uhub0: 1 port with 1 removable, self powered [ 2.146604] sdhc0: cmd timeout error [ 2.166605] sdmmc0: SD card status: 4-bit, C10, U1 [ 2.176605] ld0 at sdmmc0: <0x1b:0x534d:EB2MW:0x30:0x9c425551:0x118> [ 2.176605] ld0: 30543 MB, 7756 cyl, 128 head, 63 sec, 512 bytes/sect x 62552064 sectors [ 2.196607] IPsec: Initialized Security Association Processing. [ 2.196607] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.286611] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured [ 2.297585] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured [ 3.856729] uhub1 at uhub0 port 1: vendor 0424 (0x424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2 [ 3.866730] uhub1: multiple transaction translators [ 3.866730] uhub1: 5 ports with 4 removable, self powered [ 5.176788] usmsc0 at uhub1 port 1 [ 5.176788] usmsc0: vendor 0424 (0x424) product ec00 (0xec00), rev 2.00/2.00, addr 3 [ 5.186789] usmsc0: Ethernet address xx:xx:xx:xx:xx:xx [ 5.196789] ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3 [ 5.206790] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 6.256837] uhidev0 at uhub1 port 2 configuration 1 interface 0 [ 6.256837] uhidev0: vendor 0566 (0x566) product 3002 (0x3002), rev 1.10/1.00, addr 4, iclass 3/1 [ 6.306839] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes [ 6.716858] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [ 6.716858] uhidev1 at uhub1 port 2 configuration 1 interface 1 [ 6.726858] uhidev1: vendor 0566 (0x566) product 3002 (0x3002), rev 1.10/1.00, addr 4, iclass 3/0 [ 6.886866] uhidev1: 4 report ids [ 6.886866] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 [ 6.886866] uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 [ 6.896866] uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 7.956913] uhidev2 at uhub1 port 4 configuration 1 interface 0 [ 7.956913] uhidev2: Logitech (0x46d) USB Receiver (0xc52f), rev 2.00/30.00, addr 5, iclass 3/1 [ 8.026917] ums0 at uhidev2: 16 buttons, W and Z dirs [ 8.026917] wsmouse0 at ums0 mux 0 [ 8.026917] uhidev3 at uhub1 port 4 configuration 1 interface 1 [ 8.036917] uhidev3: Logitech (0x46d) USB Receiver (0xc52f), rev 2.00/30.00, addr 5, iclass 3/0 [ 8.106921] uhidev3: 17 report ids [ 8.106921] uhid3 at uhidev3 reportid 3: input=4, output=0, feature=0 [ 8.106921] uhid4 at uhidev3 reportid 16: input=6, output=6, feature=0 [ 8.116921] uhid5 at uhidev3 reportid 17: input=19, output=19, feature=0 [ 9.096964] urtwn0 at uhub1 port 5 [ 9.096964] urtwn0: Realtek (0x7392) 802.11n WLAN Adapter (0x7811), rev 2.00/2.00, addr 6 [ 9.176968] urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address xx:xx:xx:xx:xx:xx [ 9.186969] urtwn0: 1 rx pipe, 2 tx pipes [ 9.186969] urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 9.196969] urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 9.206970] uhub0: autoconfiguration error: illegal enable change, port 1 [ 9.206970] WARNING: 3 errors while detecting hardware; check system log. [ 9.216971] boot device: ld0 [ 9.226970] root on ld0a dumps on ld0b [ 9.246972] mountroot: trying ext2fs... [ 9.246972] mountroot: trying ffs... [ 9.266972] root file system type: ffs [ 9.266972] kern.module.path=/stand/evbarm/8.99.26/modules [ 9.276973] WARNING: no TOD clock present [ 9.276973] WARNING: using filesystem time [ 9.289877] WARNING: CHECK AND RESET THE DATE! [ 9.296974] init: copying out path `/sbin/init' 11 [ 11.817138] JIT compilation is postponed until after bpfjit module is loaded [ 12.097173] usmsc0: link state DOWN (was UNKNOWN) [ 14.087265] usmsc0: link state UP (was DOWN)