Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-07-14 20:37:43
From: ax0n
Description: Motorola ML900 ruggedized laptop
OpenBSD 6.5 (GENERIC) #1: Wed Apr 24 22:04:27 CEST 2019 [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC real mem = 1073168384 (1023MB) avail mem = 1038340096 (990MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 04/28/05, BIOS32 rev. 0 @ 0xe9b30, SMBIOS rev. 2.3 @ 0xecc1a (38 entries) bios0: vendor Insyde Software version "Version R0.16" date 04/28/2005 bios0: MOTOROLA ML900 acpi0 at bios0: rev 0 acpi0: APIC checksum error acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC BOOT acpi0: wakeup devices SLPB(S3) LAN0(S3) USB3(S3) USB4(S3) USB5(S3) COM1(S4) COM4(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.70GHz ("GenuineIntel" 686-class) 1.20 GHz, 0f-02-09 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped acpiprt0 at acpi0: bus 1 (PCI1) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 0 (PCI0) acpiec0 at acpi0 acpicpu0 at acpi0: C1(@1 halt!), FVS, 1700, 1200 MHz acpitz0 at acpi0: critical temperature is 100 degC acpibat0 at acpi0: BAT0 model "Li-Ion Battery" type LiON oem "MSL " acpiac0 at acpi0: AC unit offline acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "PNP0A03" at acpi0 not configured acpicmos0 at acpi0 acpivideo0 at acpi0: VID_ bios0: ROM list: 0xc0000/0xe000 0xe4000/0x1800 0xe6000/0x1000! 0xeb000/0x5000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xa0000000, size 0x4000000 ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04 pci1 at ppb0 bus 1 radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x02 drm0 at radeondrm0 radeondrm0: apic 1 int 16 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 pci2 at ppb1 bus 2 bktr0 at pci2 dev 3 function 0 "Brooktree BT878" rev 0x11: apic 1 int 23 bktr0: Warning - card vendor 0xffff (model 0xffff) unknown. bktr0: Pinnacle/Miro TV, <no> tuner. "Brooktree BT878 Audio" rev 0x11 at pci2 dev 3 function 1 not configured uhci0 at pci2 dev 5 function 0 "VIA VT83C572 USB" rev 0x50: apic 1 int 16 uhci1 at pci2 dev 5 function 1 "VIA VT83C572 USB" rev 0x50: apic 1 int 17 ehci0 at pci2 dev 5 function 2 "VIA VT6202 USB" rev 0x51: apic 1 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 iwi0 at pci2 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 19, address [_MAC_XXXXXXXXXX] cbb0 at pci2 dev 7 function 0 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16, CardBus support disabled cbb1 at pci2 dev 7 function 1 "TI PCI4451 CardBus" rev 0x00: apic 1 int 16, CardBus support disabled "TI PCI4451 FireWire" rev 0x00 at pci2 dev 7 function 2 not configured fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: apic 1 int 20, address [_MAC_XXXXXXXXXX] inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 puc0 at pci2 dev 9 function 0 "Oxford OX16PCI952" rev 0x00: ports: 16 com com4 at puc0 port 0 apic 1 int 20: st16650, 32 byte fifo com4: probed fifo depth: 16 bytes com5 at puc0 port 1 apic 1 int 20: st16650, 32 byte fifo com5: probed fifo depth: 16 bytes usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 cardslot0 at cbb0 slot 0 flags 0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0402H> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 1.9A> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: apic 1 int 17 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: apic 1 int 17, ICH3 ac97: codec id 0x414c4740 (Avance Logic ALC202) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 5.1, 0x8f40b1 0x0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhub3 at uhub0 port 4 configuration 1 interface 0 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2 uhub4 at uhub3 port 4 configuration 1 interface 0 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 3 ugen0 at uhub4 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/0.00 addr 4 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on wd0a (f82189ffdb99db34.a) swap on wd0b dump on wd0b initializing kernel modesetting (RV250 0x1002:0x4C66 0x1071:0xA009). radeondrm0: 1024x768, 32bpp wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)