Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-07-22 07:32:41
From: Makoto Fujiwara
Description: NetBSD/amd64 8.99.51 UEFI boot, TOSHIBA dynabook R73/T
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.51 (GENERIC) #0: Sun Jul 21 11:14:19 UTC 2019
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8120 MB
avail memory = 7856 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 87a57f18
TOSHIBA dynabook R73/T (PR73TEJA4R7ADE1)
mainbus0 (root)
ACPI: RSDP 0x0000000087FE7014 000024 (v02 TOSHIB)
ACPI: XSDT 0x0000000087FA0188 000104 (v01 TOSHIB A00A0 20151014 01000013)
ACPI: FACP 0x0000000087FDB000 0000F4 (v05 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: DSDT 0x0000000087FAB000 029C30 (v02 TOSHIB A00A0 20151014 INTL 20141107)
ACPI: FACS 0x0000000087F70000 000040
ACPI: TCPA 0x0000000087FE5000 000032 (v02 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x0000000087FE4000 0003A7 (v02 INTEL Tpm2Tabl 00001000 INTL 20141107)
ACPI: TPM2 0x0000000087FE3000 000034 (v03 INTEL EDK2 00000002 01000013)
ACPI: UEFI 0x0000000087F87000 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x0000000087FDD000 005548 (v02 SaSsdt SaSsdt 00003000 INTL 20141107)
ACPI: SSDT 0x0000000087FDC000 0005C5 (v02 Intel PerfTune 00001000 INTL 20141107)
ACPI: HPET 0x0000000087FDA000 000038 (v01 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: LPIT 0x0000000087FD9000 000094 (v01 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: APIC 0x0000000087FD8000 0000BC (v03 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: MCFG 0x0000000087FD7000 00003C (v01 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: MSDM 0x0000000087FD6000 000055 (v03 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: SLIC 0x0000000087FD5000 000176 (v01 TOSHIB A00A0 20151014 MSFT 0000005F)
ACPI: SSDT 0x0000000087FAA000 000248 (v02 TOSHIB sensrhub 00000000 INTL 20141107)
ACPI: SSDT 0x0000000087FA9000 0002D4 (v01 TOSHIB EInkApp 00000000 INTL 20141107)
ACPI: SSDT 0x0000000087FA6000 002BAE (v02 TOSHIB PtidDevc 00001000 INTL 20141107)
ACPI: SSDT 0x0000000087FA5000 0001D2 (v02 TOSHIB Sata0Ide 00001000 INTL 20141107)
ACPI: SSDT 0x0000000087FA4000 000B49 (v02 TOSHIB UsbCTabl 00001000 INTL 20141107)
ACPI: SSDT 0x0000000087FA3000 0001D9 (v02 TOSHIB zpodd 00001000 INTL 20141107)
ACPI: DBGP 0x0000000087FA2000 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000087FA1000 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087FE6000 0006E4 (v02 TOSHIB SYSTEM-1 00001000 INTL 20141107)
ACPI: BOOT 0x0000000087F9F000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013)
ACPI: SSDT 0x0000000087F9E000 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20141107)
ACPI: DMAR 0x0000000087F9D000 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: FPDT 0x0000000087F9C000 000044 (v01 TOSHIB A00A0 00000000 00000000)
ACPI: ASF! 0x0000000087F9B000 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x0000000087F9A000 000038 (v01 INTEL EDK2 00000002 01000013)
ACPI: 12 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
x2APIC available but disabled by DMAR table
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, id 0x406e3
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, id 0x406e3
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, id 0x406e3
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, id 0x406e3
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <TOSHIB,A00A0 ,20151014>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF5ECE0505C10 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF5EB7D49F810 00072F (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF5EB7D51C810 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF5EB7D400850 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0300): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0301): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0302): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0303): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout8
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: autoconfiguration error: unknown output device acpiout10
acpivga0: autoconfiguration error: unknown output device acpiout11
acpivga0: autoconfiguration error: unknown output device acpiout12
acpivga0: autoconfiguration error: unknown output device acpiout13
acpivga0: autoconfiguration error: unknown output device acpiout14
acpivga0: autoconfiguration error: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0
IOTR (PNP0C02) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
PEC2 (PNP0401) at acpi0 not configured
pckbc1 at acpi0 (PS2K, MSFT0001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, TOS0208) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMTF, PNP0C14-TBFP): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
PEPD (INT33A1) at acpi0 not configured
valz0 at acpi0 (VALZ, TOS6208): Toshiba VALZ
BT (TOS6205) at acpi0 not configured
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
TPM (MSFT0101) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
acpitz0 at acpi0 (TZ01)
acpitz0: levels: critical 102.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.2
pms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1904 (rev. 0x08)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1916 (rev. 0x07)
xhci0 at pci0 dev 20 function 0: vendor 8086 product 9d2f (rev. 0x21)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 9d31 (miscellaneous DASP, revision 0x21) at pci0 dev 20 function 2 not configured
vendor 8086 product 9d3a (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product 9d03 (rev. 0x21)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xc734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb0 at pci0 dev 28 function 0: vendor 8086 product 9d11 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtsx0 at pci1 dev 0 function 0: vendor 10ec product 5227 (rev. 0x01)
rtsx0: interrupting at msi2 vec 0
sdmmc0 at rtsx0
ppb1 at pci0 dev 28 function 2: vendor 8086 product 9d12 (rev. 0xf1)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
iwm0 at pci2 dev 0 function 0: vendor 8086 product 24f3 (rev. 0x3a)
iwm0: interrupting at msi3 vec 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 9d48 (rev. 0x21)
vendor 8086 product 9d21 (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0255
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2809
hdafg1: 0ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product 9d23 (rev. 0x21)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
wm0 at pci0 dev 31 function 6: I219 V Ethernet Connection (rev. 0x21)
wm0: interrupting at msi5 vec 0
wm0: PCI-Express bus
wm0: 4096 words FLASH, version 0.13.4
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x001a15d1 rev 0x10
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 151 us, pow 200 mW
acpicpu0: C3: FFH, lat 1034 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2301 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 14088 mW, 2300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13340 mW, 2200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12607 mW, 2100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 11888 mW, 2000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 10495 mW, 1800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 9680 mW, 1700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 8372 mW, 1500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 7738 mW, 1400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 7119 mW, 1300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 5789 mW, 1100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 5209 mW, 1000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 4090 mW, 800 MHz
acpicpu0: P13: FFH, lat 10 us, pow 3550 mW, 700 MHz
acpicpu0: P14: FFH, lat 10 us, pow 2386 mW, 500 MHz
acpicpu0: P15: FFH, lat 10 us, pow 1885 mW, 400 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
autoconfiguration error: ERROR: 765 cycle TSC drift observed
acpiacad0: AC adapter online.
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
ahcisata0 port 1: device present, speed: 6.0Gb/s
IPsec: Initialized Security Association Processing.
atapibus0 at atabus0: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SU-208GB, S16T6YGGC01CSC, TF01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus1 drive 0
wd0: <SanDisk Ultra II 480GB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 447 GB, 930261 cyl, 16 head, 63 sec, 512 bytes/sect x 937703088 sectors
wd0: GPT GUID: 8c9287db-f91c-4fdd-87cc-c5cd3619e9a0
dk0 at wd0: "a8cd7d40-0542-4e4b-acbc-b036ac1a75a9", 4096000 blocks at 2048, type: ntfs
dk1 at wd0: "070bb3a2-ac57-4642-ade1-1726bf71b5b9", 861679213 blocks at 4100096, type: ffs
dk2 at wd0: "9f2fb1f3-dacb-4768-a093-c0541c6a5fbb", 16631808 blocks at 865779712, type: swap
dk3 at wd0: "cb4d5cfe-f813-45fd-a201-9a4ac15c5310", 30720000 blocks at 882413568, type: ffs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
WARNING: 17 errors while detecting hardware; check system log.
boot device: wd0
root on dk1 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/8.99.51/modules
kern info: [drm] Memory usable by graphics device = 4096M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:636)i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (0)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_drv.c:651)i915_firmware_load_error_print] *ERROR* The driver is built-in, so to load the firmware you need to
include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or
in your initrd/initramfs image.
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_guc_loader.c:560)guc_fw_fetch] *ERROR* Failed to fetch GuC firmware from i915/skl_guc_ver4.bin (error -2)
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_gem.c:5417)i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -5 (ignored)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffd300b0420000, size 1366x768, depth 32, stride 5504
iwm0: hw rev 0x200, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
kern info: [drm] RC6 on
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)