Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-08-04 03:08:59
From: oshimaya
Description: NetBSD/amd64 9.0_BETA with Athlon II X2 240
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.0_BETA (GENERIC) #0: Sat Aug 3 15:12:46 JST 2019 oshima@yuzu:/export/netbsd-9/daily/20190803/obj/amd64/sys/arch/amd64/compile/GENERIC total memory = 7935 MB avail memory = 7679 MB rnd: seeded with 128 bits timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.) mainbus0 (root) ACPI: RSDP 0x00000000000FB4E0 000014 (v00 ACPIAM) ACPI: RSDT 0x00000000CFFA0000 000040 (v01 110811 RSDT2034 20111108 MSFT 00000097) ACPI: FACP 0x00000000CFFA0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190405/tbfadt-693) ACPI: DSDT 0x00000000CFFA0460 0088F0 (v01 AS595 AS595101 00000101 INTL 20051117) ACPI: FACS 0x00000000CFFB0000 000040 ACPI: APIC 0x00000000CFFA0390 00008C (v01 110811 APIC2034 20111108 MSFT 00000097) ACPI: MCFG 0x00000000CFFA0420 00003C (v01 110811 OEMMCFG 20111108 MSFT 00000097) ACPI: OEMB 0x00000000CFFB0040 000072 (v01 110811 OEMB2034 20111108 MSFT 00000097) ACPI: AAFT 0x00000000CFFAA460 000027 (v01 110811 OEMAAFT 20111108 MSFT 00000097) ACPI: HPET 0x00000000CFFAA490 000038 (v01 110811 OEMHPET 20111108 MSFT 00000097) ACPI: SSDT 0x00000000CFFAA4D0 000470 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: 2 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins cpu0 at mainbus0 apid 0 cpu0: AMD Athlon(tm) II X2 240 Processor, id 0x100f62 cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 1 cpu1: AMD Athlon(tm) II X2 240 Processor, id 0x100f62 cpu1: package 0, core 1, smt 0 acpi0 at mainbus0: Intel ACPICA 20190405 acpi0: X/RSDT: OemId <110811,RSDT2034,20111108>, AslId <MSFT,00000097> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 BROD (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 spkr0 at pcppi1: PC Speaker wsbell at spkr0 not configured midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 FDC (PNP0700) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 SIOR (PNP0C02) at acpi0 not configured PCIE (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface acpiwmibus at acpiwmi0 not configured ACPI: Enabled 1 GPEs in block 00 to 1F attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 1022 product 9601 (rev. 0x00) ppb0 at pci0 dev 1 function 0: vendor 1849 product 9602 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled radeon0 at pci1 dev 5 function 0: vendor 1002 product 9715 (rev. 0x00) ppb1 at pci0 dev 5 function 0: vendor 1022 product 9605 (rev. 0x00) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb1: link is x1 @ 2.5GT/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03) re0: interrupting at ioapic0 pin 17 re0: Ethernet address [_MAC_XXXXXXXXXX] re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ahcisata0 at pci0 dev 17 function 0: vendor 1002 product 4391 (rev. 0x00) ahcisata0: 64-bit DMA ahcisata0: ignoring broken port multiplier support ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xf720ff83<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A> ahcisata0: interrupting at ioapic0 pin 22 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 atabus2 at ahcisata0 channel 2 atabus3 at ahcisata0 channel 3 ohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00) ohci0: interrupting at ioapic0 pin 16 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ohci1 at pci0 dev 18 function 1: vendor 1002 product 4398 (rev. 0x00) ohci1: interrupting at ioapic0 pin 16 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 ehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00) ehci0: interrupting at ioapic0 pin 17 ehci0: dropped intr workaround enabled ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 ohci2 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00) ohci2: interrupting at ioapic0 pin 18 ohci2: OHCI version 1.0, legacy support usb3 at ohci2: USB revision 1.0 ohci3 at pci0 dev 19 function 1: vendor 1002 product 4398 (rev. 0x00) ohci3: interrupting at ioapic0 pin 18 ohci3: OHCI version 1.0, legacy support usb4 at ohci3: USB revision 1.0 ehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00) ehci1: interrupting at ioapic0 pin 19 ehci1: dropped intr workaround enabled ehci1: EHCI version 1.0 ehci1: 2 companion controllers, 3 ports each: ohci2 ohci3 usb5 at ehci1: USB revision 2.0 piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x3c) piixpm0: interrupting at SMI, iic0 at piixpm0 port 0: I2C bus ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00) ixpide0: bus-master DMA support present ixpide0: primary channel configured to compatibility mode ixpide0: primary channel interrupting at ioapic0 pin 14 atabus4 at ixpide0 channel 0 ixpide0: secondary channel configured to compatibility mode ixpide0: secondary channel interrupting at ioapic0 pin 15 atabus5 at ixpide0 channel 1 hdaudio0 at pci0 dev 20 function 2: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 16 hdafg0 at hdaudio0: vendor 10ec product 0662 hdafg0: DAC00 2ch: Speaker [Jack] hdafg0: DAC01 2ch: HP Out [Jack] hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack] hdafg0: ADC03 2ch: Mic In [Jack] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: playback, capture, full duplex, independent audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording spkr1 at audio0: PC Speaker (synthesized) wsbell at spkr1 not configured pcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x00) ppb2 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled pcscp0 at pci3 dev 6 function 0: vendor 1022 product 2020 (rev. 0x10) pcscp0: interrupting at ioapic0 pin 21 pcscp0: AM53C974, 40MHz, SCSI ID 7 scsibus0 at pcscp0: 8 targets, 8 luns per target ohci4 at pci0 dev 20 function 5: vendor 1002 product 4399 (rev. 0x00) ohci4: interrupting at ioapic0 pin 18 ohci4: OHCI version 1.0, legacy support usb6 at ohci4: USB revision 1.0 pchb1 at pci0 dev 24 function 0: vendor 1022 product 1200 (rev. 0x00) pchb2 at pci0 dev 24 function 1: vendor 1022 product 1201 (rev. 0x00) pchb3 at pci0 dev 24 function 2: vendor 1022 product 1202 (rev. 0x00) amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h) pchb4 at pci0 dev 24 function 4: vendor 1022 product 1204 (rev. 0x00) isa0 at pcib0 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: FFH, lat 4 us, pow 30375 mW, 2800 MHz acpicpu0: P1: FFH, lat 4 us, pow 25500 mW, 2100 MHz acpicpu0: P2: FFH, lat 4 us, pow 21735 mW, 1600 MHz acpicpu0: P3: FFH, lat 4 us, pow 7400 mW, 800 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % acpicpu1 at cpu1: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2805566060 Hz quality 3000 scsibus0: waiting 2 seconds for devices to settle... fd0 at fdc0 drive 0: 1.2MB, 80 cyl, 2 head, 15 sec IPsec: Initialized Security Association Processing. uhub0 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb3: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered uhub3 at usb5: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 6 ports with 6 removable, self powered uhub5 at usb4: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub5: 3 ports with 3 removable, self powered uhub6 at usb6: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered ahcisata0 port 0: device present, speed: 3.0Gb/s wd0 at atabus0 drive 0 wd0: <TOSHIBA MK5055GSX> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags) atapibus0 at atabus5: 2 targets cd0 at atapibus0 drive 0: <Optiarc DVD RW AD-7170A, , 1.2E> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) cd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) uhub7 at uhub4 port 1: vendor 0409 (0x409) product 005a (0x5a), class 9/0, rev 2.00/1.00, addr 2 uhub7: single transaction translator uhub7: 4 ports with 4 removable, self powered ehci0: handing over full speed device on port 2 to ohci0 boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/amd64/9.0/modules kern info: [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1849:0x9715). kern info: [drm] register mmio base: 0xfebf0000 kern info: [drm] register mmio size: 65536 kern info: ATOM BIOS: B43106 radeon0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF kern info: [drm] Detected VRAM RAM=100M, BAR=256M kern info: [drm] RAM width 32bits DDR Zone kernel: Available graphics memory: 2532770 kiB Zone dma32: Available graphics memory: 2097152 kiB kern info: [drm] radeon: 256M of VRAM memory ready kern info: [drm] radeon: 512M of GTT memory ready. kern info: [drm] Loading RS780 Microcode radeon0: autoconfiguration error: error: radeon_uvd: Can't load firmware "radeon/RS780_uvd.bin" kern info: [drm] GART: num cpu pages 131072, num gpu pages 131072 kern info: [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). radeon0: info: WB enabled radeon0: info: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xfffff7f78d823c00 kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. radeon0: info: radeon: MSI limited to 32-bit radeon0: interrupting at ioapic0 pin 18 (radeon0) kern info: [drm] radeon: irq initialized. kern info: [drm] ring test on 0 succeeded in 1 usecs kern info: [drm] ib test on ring 0 succeeded in 0 usecs kern info: [drm] Radeon Display Connectors kern info: [drm] Connector 0: kern info: [drm] VGA-1 kern info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c kern info: [drm] Encoders: kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 kern info: [drm] Connector 1: kern info: [drm] HDMI-A-1 kern info: [drm] HPD3 kern info: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c kern info: [drm] Encoders: kern info: [drm] DFP3: INTERNAL_KLDSCP_LVTMA radeondrmkmsfb0 at radeon0 radeondrmkmsfb0: framebuffer at 0xffffcf80ab57a000, size 1920x1080, depth 32, stride 7680 wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 uhub8 at uhub2 port 2: Texas Instruments (0x451) UT-USB41 hub (0x1446), class 9/0, rev 1.00/1.00, addr 2 uhub8: 4 ports with 4 removable, self powered uhidev0 at uhub8 port 4 configuration 1 interface 0 uhidev0: Logitech (0x46d) USB Receiver (0xc501), rev 1.10/9.10, addr 3, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir wsmouse0 at ums0 mux 0 wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation)