Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-08-08 11:32:43
From: redbrick
Description: NetBSD/i386 8.0(GENERIC) on AOpen MX3ST (Pentium III 1.4GHz)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 483 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
( )
mainbus0 (root)
ACPI: RSDP 0x00000000000F69A0 000014 (v00 AOPEN )
ACPI: RSDT 0x000000001FFF3000 000028 (v01 AOPEN AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x000000001FFF3040 000074 (v01 AOPEN AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x000000001FFF30C0 003B04 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x000000001FFF0000 000040
ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x008E (20170303/psloop-239)
ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x0093 (20170303/psloop-239)
ACPI: 1 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Intel(R) Celeron(TM) CPU 1400MHz, id 0x6b4
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <AOPEN ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 0
LNK1: ACPI: Found matching pin for 0.31.INTC at func 4: 12
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
LNKE: ACPI: Found matching pin for 2.10.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
joy0 at acpi0 (GAME, PNPB02F): io 0x200-0x207
joy0: joystick not connected
mpu0 at acpi0 (MIDI, PNPB006): io 0x330-0x331 irq 5
midi1 at mpu0: Roland MPU-401 MIDI UART
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 80.0C
acpitz0: levels: critical 100.0 C, passive 80.0 C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1130 (rev. 0x04)
agp0 at pchb0: using generic initialization for Intel AGP
agp0: : aperture at 0xe0000000, size 0x2400000
ppb0 at pci0 dev 1 function 0: vendor 8086 product 1131 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 102b product 2537 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb1 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x05)
pci2 at ppb1 bus 2
pci2: This pci host supports neither MSI nor MSI-X.
pci2: i/o space, memory space enabled
fxp0 at pci2 dev 8 function 0: Intel i82562 Ethernet (rev. 0x03)
fxp0: interrupting at irq 11
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
clcs0 at pci2 dev 10 function 0: vendor 1013 product 6003 (rev. 0x01)
clcs0: vendor 5053 product 3357
clcs0: interrupting at irq 11
clcs0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
clcs0: ac97: ext id 0x200<AMAP>
clcs0: ac97: using inverted AC97_POWER_EAMP bit
audio0 at clcs0: full duplex, playback, capture, mmap, independent
clcs0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
clcs0: Latency: 256 milliseconds
midi2 at clcs0: CS4280 MIDI UART
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2440 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 0x05)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 8086 product 2442 (rev. 0x05)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2443 (rev. 0x05)
LNKB: Picked IRQ 9 with weight 0
ichsmb0: interrupting at irq 9
iic0 at ichsmb0: I2C bus
uhci1 at pci0 dev 31 function 4: vendor 8086 product 2444 (rev. 0x05)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 50 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-ST RW/DVD GCC-4480B, , 1.01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0
wd0: <HDS722540VLAT20>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 39266 MB, 79780 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.03, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.03, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub1 port 2 configuration 1 interface 2
uhidev2: Logitech (0x46d) USB Receiver (0xc52b), rev 2.00/12.03, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.0/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)