Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-08-08 11:34:13
From: redbrick
Description: NetBSD/i386 1.5(GENERIC) on AOpen MX3ST (Pentium III 1.4GHz)
NetBSD 1.5 (GENERIC) #1: Sun Nov 19 21:42:11 MET 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium Pro, II or III (686-class)
total memory = 511 MB
avail memory = 468 MB
using 6573 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb140
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x1130 (rev. 0x04)
ppb0 at pci0 dev 1 function 0: Intel product 0x1131 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox product 0x2537 (rev. 0x02)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x05)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 4 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 10
ex0: MAC address xx:xx:xx:xx:xx:xx
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0017, rev. 6
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
clcs0 at pci2 dev 5 function 0: Cirrus Logic CS4280 CrystalClear Audio Interface (rev. 0x01)
clcs0: interrupting at irq 11
clcs0: CRY20 codec; headphone, 20 bit DAC, 18 bit ADC, Spatializer 3D
audio0 at clcs0: full duplex, independent
midi0 at clcs0: CS4280 MIDI UART
siop0 at pci2 dev 10 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 11
scsibus0 at siop0: 16 targets, 8 luns per target
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x05)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (rev. 0x05)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel interrupting at irq 14
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 1: <HL-DT-ST RW/DVD GCC-4480B, , 1.01> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307015>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 14649 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30003120 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x05)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x05) at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x05)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ff65 netmask ff65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 6 lun 0: <IBM, DCAS-32160, S65A> SCSI2 0/direct fixed
siop0: target 6 now synchronous at 20.0Mhz, offset 15
sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uid 0 on /mnt/h: file system full