Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-08-18 22:54:36
From: Squat
Description: FreeBSD/amd64 on Dell Inc. PowerEdge R720
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-STABLE GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz (3500.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 51539607552 (49152 MB)
avail memory = 50070216704 (47750 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic1: Changing APIC ID to 1
ioapic2: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
Launching APs: 14 15 10 3 8 7 9 4 1 11 12 5 13 2 6
Timecounter "TSC-low" frequency 1750038896 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4254] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811355c0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd8b00000-0xd8bfffff,0xd8ff0000-0xd8ff3fff irq 38 at device 0.0 numa-domain 0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd8c00000-0xd8cfffff,0xd8ff4000-0xd8ff7fff irq 37 at device 0.1 numa-domain 0 on pci1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.2 numa-domain 0 on pci1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.3 numa-domain 0 on pci1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xecc0-0xecdf mem 0xd9d00000-0xd9dfffff,0xd9ff8000-0xd9ffbfff irq 40 at device 0.0 numa-domain 0 on pci2
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 4 RX queues 4 TX queues
ix0: Using MSI-X interrupts with 5 vectors
ix0: allocated for 4 queues
ix0: allocated for 4 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 4/2048, RX 4/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xece0-0xecff mem 0xd9e00000-0xd9efffff,0xd9ffc000-0xd9ffffff irq 44 at device 0.1 numa-domain 0 on pci2
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 4 RX queues 4 TX queues
ix1: Using MSI-X interrupts with 5 vectors
ix1: allocated for 4 queues
ix1: allocated for 4 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 4/2048, RX 4/2048
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
mfi0: <Drake Skinny> port 0xfc00-0xfcff mem 0xdaffc000-0xdaffffff,0xdaf80000-0xdafbffff irq 42 at device 0.0 numa-domain 0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23 
mfi0: 3116 (619478001s/0x0020/info) - Shutdown command received from host
mfi0: 3117 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028)
mfi0: 3118 (boot + 4s/0x0020/info) - Firmware version 2.120.14-1730
mfi0: 3119 (boot + 6s/0x0020/info) - Package version 20.11.0-0002
mfi0: 3120 (boot + 6s/0x0020/info) - Board Revision A01
mfi0: 3121 (boot + 30s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 3122 (boot + 30s/0x0002/info) - Inserted: Encl PD 20
mfi0: 3123 (boot + 30s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090eca69500,0000000000000000
mfi0: 3124 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0)
pcib4: mfi0: 3125 (boot + 30s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df5203d,0000000000000000
mfi0: 3126 (boot + 30s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 3127 (boot + 30s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df52139,0000000000000000
<ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0
pci4: mfi0: 3128 (boot + 30s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 3129 (boot + 30s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca00a257105,00<ACPI PCI bus> numa-domain 000000000000000
mfi0: 3130 (boot + 30s/0x0002/info) - Inserted: PD 21(e0x00/s0)
mfi0: 3131 (boot + 30s/0x0002/info) - Inserted: PD 21(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500056b37789abfd,0000000000000000
 on pcib4
mfi0: 3132 (619485268s/0x0020/info) - Time established as 08/18/19 23:14:28; (41 seconds since power on)
mfi0: 3133 (619485994s/0x0020/info) - Flashing image: BIOS v4.37.00_4.12.05.00_0x05290003
mfi0: 3134 (619486002s/0x0020/info) - Flashing image: HIIM v01.47.00
mfi0: 3135 (619486018s/0x0020/info) - Flashing image: APP  v2.121.14-6325
mfi0: 3136 (619486082s/0x0020/info) - Flashing image: PCLI v03.02-015:#%00008
mfi0: 3137 (619486082s/0x0020/info) - Flashing image: CTLR v3.00-0026
mfi0: 3138 (619486099s/0x0020/info) - Flashing image: NVDT v3.09.03-0039
mfi0: 3139 (619486106s/0x0020/info) - Flashing image: BTBL v2.02.00.00-0001
pcib5: mfi0: 3140 (619486106s/0x0020/info) - Flash of new firmware image(s)complete
mfi0: 3141 (boot + 94s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028)
mfi0: 3142 (boot + 94s/0x0020/info) - Firmware version 2.121.14-6325
mfi0: <ACPI PCI-PCI bridge> irq 53 at device 3.2 numa-domain 0 on pci0
3143 (boot + 96s/0x0020/info) - Package version 20.13.3-0001
pci5: mfi0: 3144 (boot + 96s/0x0020/info) - Board Revision A01
mfi0: 3145 (boot + 121s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 3146 (boot + 121s/0x0002/info) - Inserted: Encl PD 20
mfi0: <ACPI PCI bus> numa-domain 0 on pcib5
3147 (boot + 121s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090eca69500,0000000000000000
mfi0: 3148 (boot + 121s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 3149 (boot + 121s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df5203d,0000000000000000
mfi0: 3150 (boot + 121s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 3151 (boot + 121s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df52139,0000000000000000
mfi0: 3152 (boot + 121s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 3153 (boot + 121s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca00a257105,0000000000000000
mfi0: 3154 (boot + 121s/0x0002/info) - Inserted: PD 21(e0x00/s0)
mfi0: 3155 (boot + 121s/0x0002/info) - Inserted: PD 21(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500056b37789abfd,0000000000000000
mfi0: 3156 (619486330s/0x0020/info) - Time established as 08/18/19 23:32:10; (122 seconds since power on)
mfi0: 3157 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028)
mfi0: 3158 (boot + 3s/0x0020/info) - Firmware version 2.121.14-6325
mfi0: 3159 (boot + 5s/0x0020/info) - Package version 20.13.3-0001
mfi0: 3160 (boot + 5s/0x0020/info) - Board Revision A01
mfi0: 3161 (boot + 29s/0x0002/info) - Unexpected sense: Encl PD 20 Path 5948f090eca69500, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
mfi0: 3162 (boot + 31s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 3163 (boot + 31s/0x0002/info) - Inserted: Encl PD 20
pcib6: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
pci6: <PCI bus> numa-domain 0 on pcib6
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdc8fd000-0xdc8fd3ff irq 23 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdbffc000-0xdbffffff,0xdb000000-0xdb7fffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
pcib12: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci9
pci12: <PCI bus> numa-domain 0 on pcib12
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc8fe000-0xdc8fe3ff irq 22 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib13: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci13: <PCI bus> numa-domain 0 on pcib13
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdc8ff000-0xdc8ff7ff irq 20 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib14: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 85 at device 1.0 numa-domain 1 on pci14
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI PCI-PCI bridge> irq 85 at device 2.0 numa-domain 1 on pci14
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI PCI-PCI bridge> irq 85 at device 3.0 numa-domain 1 on pci14
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.2 numa-domain 1 on pci14
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci19: <ACPI PCI bus> numa-domain 0 on pcib19
pci19: <dasp, performance counters> at device 14.1 (no driver attached)
pci19: <dasp, performance counters> at device 19.1 (no driver attached)
pci19: <dasp, performance counters> at device 19.5 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
pci20: <dasp, performance counters> at device 14.1 (no driver attached)
pci20: <dasp, performance counters> at device 19.1 (no driver attached)
pci20: <dasp, performance counters> at device 19.5 (no driver attached)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21f200002400
device_attach: est15 attach returned 6
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 286102MB (585937500 sectors) SYSPD volume (deviceid: 2)
mfisyspd0:  SYSPD volume attached
mfi0: uhub0: 3164 (boot + 31s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090eca69500,0000000000000000
mfi0: 3165 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mfi0: 3166 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df5203d,00uhub1: 00000000000000
mfi0: 3167 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mfi0: 3168 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5007df52139,0000000000000000
mfi0: 3169 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 3170 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca00a257105,0000000000000000
mfi0: 3171 (boot + 31s/0x0002/info) - Inserted: PD 21(e0x00/s0)
mfi0: 3172 (boot + 31s/0x0002/info) - Inserted: PD 21(e0x00/s0) Info: enclPd=00, scsiType=7f, portMap=00, sasAddr=500056b37789abfd,0000000000000000
mfi0: 3173 (619490248s/0x0020/info) - Time established as 08/19/19  0:37:28; (41 seconds since power on)
mfi0: 3174 (619490404s/0x0020/info) - Host driver is loaded and operational
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
mfid0 numa-domain 0 on mfi0
mfid0: 285568MB (584843264 sectors) RAID volume (no label) is optimal
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 numa-domain 0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on usbus1
kbd2 at ukbd0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0
ukbd1 numa-domain 0 on uhub4
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
lo0: link state changed to UP
igb0: link state changed to UP
ums0 numa-domain 0 on uhub4
ums0: <Mouse> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ums1 numa-domain 0 on uhub4
ums2 numa-domain 0 on uhub2
ums2: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on usbus1
ums1: <Mouse REL> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
ums2: 10 buttons and [XYZT] coordinates ID=2