Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-08-22 12:17:10
From: Sevan / Venture37
Description: 13 inch Macbook (mid 2012, MacBook9,2)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.9 (GENERIC) #0: Sun Aug 18 07:05:16 UTC 2019 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC total memory = 16290 MB avail memory = 15787 MB cpu_rng: RDRAND timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done RTC BIOS diagnostic error 0x7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 efi: systbl at pa 8ae8ee10 Apple Inc. MacBookPro9,2 (1.0) mainbus0 (root) ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE ) ACPI: XSDT 0x000000008AD8E1C0 0000B4 (v01 APPLE Apple00 00000000 01000013) ACPI: FACP 0x000000008AD8C000 0000F4 (v04 APPLE Apple00 00000000 Loki 0000005F) ACPI: DSDT 0x000000008AD82000 004D53 (v01 APPLE MacBookP 00090001 INTL 20100915) ACPI: FACS 0x000000008AD1E000 000040 ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 0x000000008AD7F000 0002E0 (v01 APPLE SataAhci 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD7E000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD79000 000D20 (v01 APPLE UsbPpt 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD77000 000159 (v02 APPLE IGHda 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD75000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD73000 0015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD70000 000AE6 (v01 APPLE TbtPEG10 00001000 INTL 20100915) ACPI: SSDT 0x000000008AD6D000 000615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915) ACPI: SSDT 0x000000008AD6C000 000B3D (v01 PmRef CpuPm 00003000 INTL 20100915) ACPI: SSDT 0x000000008AD6B000 000315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915) ACPI: SSDT 0x000000008AD6A000 00037A (v01 PmRef ApTst 00003000 INTL 20100915) ACPI: DMAR 0x000000008AD69000 000088 (v01 APPLE IVB 00000001 AAPL 00000001) ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: 12 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, id 0x306a9 cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 2 cpu1: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, id 0x306a9 cpu1: package 0, core 1, smt 0 cpu2 at mainbus0 apid 1 cpu2: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, id 0x306a9 cpu2: package 0, core 0, smt 1 cpu3 at mainbus0 apid 3 cpu3: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, id 0x306a9 cpu3: package 0, core 1, smt 1 acpi0 at mainbus0: Intel ACPICA 20190405 acpi0: X/RSDT: OemId <APPLE , Apple00,00000000>, AslId < ,01000013> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT acpi0: MCFG: segment 0, bus 0-154, address 0x00000000e0000000 ACPI Error: Needed type [Reference], found [Integer] 0xffff800cb9d4a1d0 (20190405/exresop-114) ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500) ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF801007B47810 0003A4 (v01 PmRef ApIst 00003000 INTL 20100915) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF800CB9D0F850 000119 (v01 PmRef ApCst 00003000 INTL 20100915) acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 acpivga0 at acpi0 (IGPU): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device acpiout1: brightness levels: [0,7,13,20,27,33,40,47,53,60,67,73,80,87,93,100] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device acpivga0: autoconfiguration error: unknown output device acpiout0 acpivga0: autoconfiguration error: unknown output device acpiout2 acpivga0: autoconfiguration error: unknown output device acpiout3 acpivga0: autoconfiguration error: unknown output device acpiout4 acpivga0: autoconfiguration error: unknown output device acpiout5 acpivga0: autoconfiguration error: unknown output device acpiout6 acpivga0: autoconfiguration error: unknown output device acpiout7 acpivga0: connected output devices: acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 FWHD (INT0800) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 SMC (APP0001) at acpi0 not configured SMS0 (APP0003) at acpi0 not configured ALS0 (ACPI0008) at acpi0 not configured SBS0 (ACPI0002) at acpi0 not configured GMUX (APP000B) at acpi0 not configured PDRC (PNP0C02) at acpi0 not configured acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button PNLF (APP0002) at acpi0 not configured acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button MEM2 (PNP0C01) at acpi0 not configured ACPI: Enabled 4 GPEs in block 00 to 3F pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09) ppb0 at pci0 dev 1 function 0: vendor 8086 product 0151 (rev. 0x09) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s pci1 at ppb0 bus 4 pci1: i/o space, memory space enabled, rd/line, wr/inv ok i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09) xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04) xhci0: interrupting at msi0 vec 0 xhci0: xHCI version 1.0 usb0 at xhci0: USB revision 3.0 usb1 at xhci0: USB revision 2.0 vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 usb2 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at msi1 vec 0 hdafg0 at hdaudio0: vendor 1013 product 4206 hdafg0: ADC00 2ch: Mic In [Built-In] hdafg0: DAC01 4ch: Speaker [Built-In] hdafg0: DAC02 2ch: HP Out [Jack] hdafg0: DIG03 2ch: SPDIF Out [Jack] hdafg0: 4ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 PCM32 AC3 audio0 at hdafg0: playback, capture, full duplex, independent audio0: slinear_le:16 4ch 48000Hz, blk 40ms for playback audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured hdafg1 at hdaudio0: vendor 8086 product 2806 hdafg1: autoconfiguration error: duplicate pin in association hdafg1: autoconfiguration error: duplicate pin in association hdafg1: 0ch/0ch 48000Hz PCM16* ppb1 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb1: link is x1 @ 2.5GT/s pci2 at ppb1 bus 1 pci2: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci2 dev 0 function 0: Broadcom BCM57765 Gigabit Ethernet bge0: interrupting at msix2 vec 0 bge0: HW config 00080114, 00004014, 00002838, 00000000 00000000 bge0: ASIC BCM57765 B0 (0x57785100), Ethernet address 68:5b:35: bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM57765 1000BASE-T media interface, rev. 4 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto sdhc0 at pci2 dev 0 function 1: vendor 14e4 product 16bc (rev. 0x10) sdhc0: interrupting at ioapic0 pin 17 sdhc0: SDHC 3.0, rev 21, SDMA, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks sdmmc0 at sdhc0 slot 0 ppb2 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4) ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb2: link is x1 @ 2.5GT/s pci3 at ppb2 bus 2 pci3: i/o space, memory space enabled, rd/line, wr/inv ok vendor 14e4 product 4331 (miscellaneous network, revision 0x02) at pci3 dev 0 function 0 not configured ppb3 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4) ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb3: link is x1 @ 2.5GT/s pci4 at ppb3 bus 3 pci4: i/o space, memory space enabled, rd/line, wr/inv ok fwohci0 at pci4 dev 0 function 0: vendor 11c1 product 5901 (rev. 0x08) fwohci0: interrupting at ioapic0 pin 18 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:42:62 fwohci0: autoconfiguration error: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset fwohci0: Clear PME# now ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04) ehci1: interrupting at ioapic0 pin 22 ehci1: EHCI version 1.0 usb3 at ehci1: USB revision 2.0 ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e57 (rev. 0x04) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: autoconfiguration error: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. tco0: Min/Max interval 1/367 seconds ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04) ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A> ahcisata0: interrupting at msi3 vec 0 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo pcppi0 at isa0 port 0x61 spkr1 at pcppi0: PC Speaker wsbell at spkr1 not configured midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF800CBA300010 0008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915) acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 148 us, pow 500 mW acpicpu0: C3: FFH, lat 198 us, pow 200 mW acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2501 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2500 MHz acpicpu0: P2: FFH, lat 10 us, pow 33218 mW, 2400 MHz acpicpu0: P3: FFH, lat 10 us, pow 31470 mW, 2300 MHz acpicpu0: P4: FFH, lat 10 us, pow 29755 mW, 2200 MHz acpicpu0: P5: FFH, lat 10 us, pow 28074 mW, 2100 MHz acpicpu0: P6: FFH, lat 10 us, pow 26426 mW, 2000 MHz acpicpu0: P7: FFH, lat 10 us, pow 24816 mW, 1900 MHz acpicpu0: P8: FFH, lat 10 us, pow 23233 mW, 1800 MHz acpicpu0: P9: FFH, lat 10 us, pow 21683 mW, 1700 MHz acpicpu0: P10: FFH, lat 10 us, pow 20164 mW, 1600 MHz acpicpu0: P11: FFH, lat 10 us, pow 18678 mW, 1500 MHz acpicpu0: P12: FFH, lat 10 us, pow 17226 mW, 1400 MHz acpicpu0: P13: FFH, lat 10 us, pow 15802 mW, 1300 MHz acpicpu0: P14: FFH, lat 10 us, pow 14408 mW, 1200 MHz acpicpu0: T0: FFH, lat 1 us, pow 14408 mW, 100 % acpicpu0: T1: FFH, lat 1 us, pow 13447 mW, 94 % acpicpu0: T2: FFH, lat 1 us, pow 12486 mW, 88 % acpicpu0: T3: FFH, lat 1 us, pow 11526 mW, 82 % acpicpu0: T4: FFH, lat 1 us, pow 10565 mW, 75 % acpicpu0: T5: FFH, lat 1 us, pow 9605 mW, 69 % acpicpu0: T6: FFH, lat 1 us, pow 8644 mW, 63 % acpicpu0: T7: FFH, lat 1 us, pow 7684 mW, 57 % acpicpu0: T8: FFH, lat 1 us, pow 6723 mW, 50 % acpicpu0: T9: FFH, lat 1 us, pow 5763 mW, 44 % acpicpu0: T10: FFH, lat 1 us, pow 4802 mW, 38 % acpicpu0: T11: FFH, lat 1 us, pow 3842 mW, 32 % acpicpu0: T12: FFH, lat 1 us, pow 2881 mW, 25 % acpicpu0: T13: FFH, lat 1 us, pow 1921 mW, 19 % acpicpu0: T14: FFH, lat 1 us, pow 960 mW, 13 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 acpicpu2 at cpu2: ACPI CPU acpicpu3 at cpu3: ACPI CPU fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2494512640 Hz quality 3000 acpiacad0: AC adapter offline. uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 uhub0: 4 ports with 4 removable, self powered uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 uhub1: 4 ports with 4 removable, self powered IPsec: Initialized Security Association Processing. uhub2 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ahcisata0 port 0: device present, speed: 6.0Gb/s uhub3 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ahcisata0 port 1: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 wd0: <SanDisk SSD PLUS 120GB> wd0: drive supports 1-sector PIO transfers, LBA48 addressing wd0: 111 GB, 232594 cyl, 16 head, 63 sec, 512 bytes/sect x 234455040 sectors wd0: GPT GUID: xxx dk0 at wd0: "EFI System Partition", 409600 blocks at 40, type: msdos dk1 at wd0: "xxx", 234045360 blocks at 409640, type: <unknown> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) atapibus0 at atabus1: 1 targets cd0 at atapibus0 drive 0: <HL-DT-ST DVDRW GS41N, D76330406KSFFYQAK, UA03> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) umass0 at uhub0 port 2 configuration 1 interface 0 umass0: SanDisk (0x781) Ultra (0x5581), rev 3.00/1.00, addr 1 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors sd0: GPT GUID: 6f5b2797-02a2-4059-be54-755cff041b57 dk2 at sd0: "EFI system", 262144 blocks at 2048, type: msdos dk3 at sd0: "xxx", 2908160 blocks at 264192, type: ffs uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2 uhub4: single transaction translator uhub4: 8 ports with 7 removable, self powered uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2 uhub5: single transaction translator uhub5: 6 ports with 5 removable, self powered uhub6 at uhub4 port 8: vendor 0424 (0x424) product 2513 (0x2513), class 9/0, rev 2.00/b.b3, addr 3 uhub6: multiple transaction translators uhub6: 3 ports with 0 removable, self powered uvideo0 at uhub5 port 1 configuration 1 interface 0: Apple Inc. (0x5ac) FaceTime HD Camera (Built-in) (0x8509), rev 2.00/5.16, addr 3 video0 at uvideo0: Apple Inc. (0x5ac) FaceTime HD Camera (Built-in) (0x8509), rev 2.00/5.16, addr 3 uhub7 at uhub6 port 1: Apple Inc. (0xa5c) BRCM20702 Hub (0x4500), class 9/0, rev 2.00/1.00, addr 4 uhub7: 3 ports with 0 removable, self powered uhidev0 at uhub7 port 1 configuration 1 interface 0 uhidev0: vendor 05ac (0x5ac) product 820a (0x820a), rev 2.00/1.00, addr 5, iclass 3/1 uhidev0: 1 report ids ukbd0 at uhidev0 reportid 1: 8 Variable keys, 6 Array codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub7 port 2 configuration 1 interface 0 uhidev1: vendor 05ac (0x5ac) product 820b (0x820b), rev 2.00/1.00, addr 6, iclass 3/1 uhidev1: 2 report ids ums0 at uhidev1 reportid 2: 3 buttons wsmouse0 at ums0 mux 0 ubt0 at uhub7 port 3 ubt0: Apple Inc. (0x5ac) Bluetooth USB Host Controller (0x821d), rev 2.00/1.56, addr 7 uhidev2 at uhub6 port 2 configuration 1 interface 0 uhidev2: Apple Computer, Inc. (0x5ac) IR Receiver (0x8242), rev 2.00/0.16, addr 8, iclass 3/0 uhidev2: 38 report ids uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 uhidev3 at uhub6 port 3 configuration 1 interface 0 uhidev3: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/2.19, addr 9, iclass 3/1 uhidev3: 9 report ids ukbd1 at uhidev3 reportid 1: 8 Variable keys, 6 Array codes, apple fn key wskbd1 at ukbd1 mux 1 uhid3 at uhidev3 reportid 9: input=0, output=0, feature=3 uhidev4 at uhub6 port 3 configuration 1 interface 1 uhidev4: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/2.19, addr 9, iclass 3/0 uhidev4: 68 report ids uhid4 at uhidev4 reportid 68: input=511, output=0, feature=0 uhidev5 at uhub6 port 3 configuration 1 interface 2 uhidev5: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/2.19, addr 9, iclass 3/1 uhidev5: 2 report ids ums1 at uhidev5 reportid 2: 3 buttons wsmouse1 at ums1 mux 0 WARNING: 11 errors while detecting hardware; check system log. boot device: sd0 root on dk3 root file system type: ffs kern.module.path=/stand/amd64/9.99.9/modules clock: unknown CMOS layout kern info: [drm] Memory usable by graphics device = 2048M WARNING: clock gained 4 days kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. kern info: [drm] failed to find VBIOS tables i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) kern info: [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 intelfb0 at i915drmkms0 intelfb0: framebuffer at 0xffffa8013d974000, size 1280x800, depth 32, stride 5120 kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:230)cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:381)intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 wskbd1: connecting to wsdisplay0 acpibat0: normal capacity on 'charge state'