Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-08-22 12:19:07
From: Sevan / Venture37
Description: 13 inch Macbook (late 2011, MacBook8,1)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.9 (GENERIC) #0: Sun Aug 18 07:05:16 UTC 2019 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC total memory = 4008 MB avail memory = 3862 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 efi: systbl at pa 8ae8ef18 Apple Inc. MacBookPro8,1 (1.0) mainbus0 (root) ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE ) ACPI: XSDT 0x000000008AD8E1C0 00009C (v01 APPLE Apple00 0000F000 01000013) ACPI: FACP 0x000000008AD8C000 0000F4 (v04 APPLE Apple00 0000F000 Loki 0000005F) ACPI: DSDT 0x000000008AD80000 006F12 (v01 APPLE MacBookP 00080001 INTL 20061109) ACPI: FACS 0x000000008AD3E000 000040 ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 0x000000008AD7C000 00020D (v01 APPLE SataOdd 00001000 INTL 20061109) ACPI: SSDT 0x000000008AD7B000 000024 (v01 APPLE SmcDppt 00001000 INTL 20061109) ACPI: SSDT 0x000000008AD79000 00061A (v01 APPLE UsbNoRmh 00001000 INTL 20061109) ACPI: SSDT 0x000000008AD76000 000159 (v02 APPLE IGHda 00001000 INTL 20061109) ACPI: SSDT 0x000000008AD74000 000032 (v01 APPLE SsdtS3 00001000 INTL 20061109) ACPI: SSDT 0x000000008AD73000 000527 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0x000000008AD72000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT 0x000000008AD71000 000315 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0x000000008AD70000 00037A (v01 PmRef ApTst 00003000 INTL 20061109) ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: 10 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz, id 0x206a7 cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 2 cpu1: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz, id 0x206a7 cpu1: package 0, core 1, smt 0 cpu2 at mainbus0 apid 1 cpu2: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz, id 0x206a7 cpu2: package 0, core 0, smt 1 cpu3 at mainbus0 apid 3 cpu3: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz, id 0x206a7 cpu3: package 0, core 1, smt 1 acpi0 at mainbus0: Intel ACPICA 20190405 acpi0: X/RSDT: OemId <APPLE , Apple00,0000f000>, AslId < ,01000013> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT acpi0: MCFG: segment 0, bus 0-155, address 0x00000000e0000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFD1923E15C010 000781 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFD192A5544810 0003A4 (v01 PmRef ApIst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFD1923E0C4990 000119 (v01 PmRef ApCst 00003000 INTL 20061109) acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 acpivga0 at acpi0 (IGPU): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device acpiout1: brightness levels: [0,7,13,20,27,33,40,47,53,60,67,73,80,87,93,100] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device acpivga0: autoconfiguration error: unknown output device acpiout0 acpivga0: autoconfiguration error: unknown output device acpiout2 acpivga0: autoconfiguration error: unknown output device acpiout3 acpivga0: autoconfiguration error: unknown output device acpiout4 acpivga0: autoconfiguration error: unknown output device acpiout5 acpivga0: autoconfiguration error: unknown output device acpiout6 acpivga0: autoconfiguration error: unknown output device acpiout7 acpivga0: connected output devices: acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 FWHD (INT0800) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 SMC (APP0001) at acpi0 not configured SMS0 (APP0003) at acpi0 not configured ALS0 (ACPI0008) at acpi0 not configured SBS0 (ACPI0002) at acpi0 not configured GMUX (APP000B) at acpi0 not configured PDRC (PNP0C02) at acpi0 not configured MEM2 (PNP0C01) at acpi0 not configured acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button PNLF (APP0002) at acpi0 not configured acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button ACPI: Enabled 4 GPEs in block 00 to 3F pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 0104 (rev. 0x09) ppb0 at pci0 dev 1 function 0: vendor 8086 product 0101 (rev. 0x09) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok ppb1 at pci0 dev 1 function 1: vendor 8086 product 0105 (rev. 0x09) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s pci2 at ppb1 bus 5 pci2: i/o space, memory space enabled, rd/line, wr/inv ok i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0126 (rev. 0x09) vendor 8086 product 1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured uhci0 at pci0 dev 26 function 0: vendor 8086 product 1c2c (rev. 0x05) uhci0: interrupting at ioapic0 pin 21 usb0 at uhci0: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 8086 product 1c2d (rev. 0x05) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: wrong number of companions (3 != 1) ehci0: 1 companion controller, 2 ports: uhci0 usb1 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at msi0 vec 0 hdafg0 at hdaudio0: vendor 1013 product 4206 hdafg0: ADC00 2ch: Mic In [Built-In] hdafg0: DAC01 4ch: Speaker [Built-In] hdafg0: DAC02 2ch: HP Out [Jack] hdafg0: DIG03 2ch: SPDIF Out [Jack] hdafg0: ADC04 2ch: Line In [Jack] hdafg0: 4ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 PCM32 AC3 audio0 at hdafg0: playback, capture, full duplex, independent audio0: slinear_le:16 4ch 48000Hz, blk 40ms for playback audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured hdafg1 at hdaudio0: vendor 8086 product 2805 hdafg1: autoconfiguration error: duplicate pin in association hdafg1: autoconfiguration error: duplicate pin in association hdafg1: 0ch/0ch 48000Hz PCM16* ppb2 at pci0 dev 28 function 0: vendor 8086 product 1c10 (rev. 0xb5) ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb2: link is x1 @ 2.5GT/s pci3 at ppb2 bus 2 pci3: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci3 dev 0 function 0: Broadcom BCM57765 Gigabit Ethernet bge0: interrupting at msix1 vec 0 bge0: HW config 00080114, 00004014, 00002838, 00000000 00000000 bge0: ASIC BCM57765 B0 (0x57785100), Ethernet address 3c:07:54: bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM57765 1000BASE-T media interface, rev. 4 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto sdhc0 at pci3 dev 0 function 1: vendor 14e4 product 16bc (rev. 0x10) sdhc0: interrupting at ioapic0 pin 17 sdhc0: SDHC 3.0, rev 21, SDMA, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks sdmmc0 at sdhc0 slot 0 ppb3 at pci0 dev 28 function 1: vendor 8086 product 1c12 (rev. 0xb5) ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb3: link is x1 @ 2.5GT/s pci4 at ppb3 bus 3 pci4: i/o space, memory space enabled, rd/line, wr/inv ok vendor 14e4 product 4331 (miscellaneous network, revision 0x02) at pci4 dev 0 function 0 not configured ppb4 at pci0 dev 28 function 2: vendor 8086 product 1c14 (rev. 0xb5) ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb4: link is x1 @ 2.5GT/s pci5 at ppb4 bus 4 pci5: i/o space, memory space enabled, rd/line, wr/inv ok fwohci0 at pci5 dev 0 function 0: vendor 11c1 product 5901 (rev. 0x08) fwohci0: interrupting at ioapic0 pin 18 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 3c:07:54:ff:fe: fwohci0: autoconfiguration error: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset fwohci0: Clear PME# now uhci1 at pci0 dev 29 function 0: vendor 8086 product 1c27 (rev. 0x05) uhci1: interrupting at ioapic0 pin 19 usb2 at uhci1: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 8086 product 1c26 (rev. 0x05) ehci1: interrupting at ioapic0 pin 22 ehci1: EHCI version 1.0 ehci1: wrong number of companions (4 != 1) ehci1: 1 companion controller, 2 ports: uhci1 usb3 at ehci1: USB revision 2.0 ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1c49 (rev. 0x05) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: autoconfiguration error: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. tco0: Min/Max interval 1/367 seconds ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1c03 (rev. 0x05) ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A> ahcisata0: interrupting at msi2 vec 0 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1c22 (rev. 0x05) ichsmb0: interrupting at ioapic0 pin 18 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 pcppi0 at isa0 port 0x61 spkr1 at pcppi0: PC Speaker wsbell at spkr1 not configured midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 64 us, pow 500 mW acpicpu0: C3: FFH, lat 84 us, pow 200 mW acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2401 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2400 MHz acpicpu0: P2: FFH, lat 10 us, pow 27740 mW, 2000 MHz acpicpu0: P3: FFH, lat 10 us, pow 24490 mW, 1800 MHz acpicpu0: P4: FFH, lat 10 us, pow 21045 mW, 1600 MHz acpicpu0: P5: FFH, lat 10 us, pow 18055 mW, 1400 MHz acpicpu0: P6: FFH, lat 10 us, pow 15194 mW, 1200 MHz acpicpu0: P7: FFH, lat 10 us, pow 12156 mW, 1000 MHz acpicpu0: P8: FFH, lat 10 us, pow 9543 mW, 800 MHz acpicpu0: T0: FFH, lat 1 us, pow 9543 mW, 100 % acpicpu0: T1: FFH, lat 1 us, pow 8906 mW, 94 % acpicpu0: T2: FFH, lat 1 us, pow 8270 mW, 88 % acpicpu0: T3: FFH, lat 1 us, pow 7634 mW, 82 % acpicpu0: T4: FFH, lat 1 us, pow 6998 mW, 75 % acpicpu0: T5: FFH, lat 1 us, pow 6362 mW, 69 % acpicpu0: T6: FFH, lat 1 us, pow 5725 mW, 63 % acpicpu0: T7: FFH, lat 1 us, pow 5089 mW, 57 % acpicpu0: T8: FFH, lat 1 us, pow 4453 mW, 50 % acpicpu0: T9: FFH, lat 1 us, pow 3817 mW, 44 % acpicpu0: T10: FFH, lat 1 us, pow 3181 mW, 38 % acpicpu0: T11: FFH, lat 1 us, pow 2544 mW, 32 % acpicpu0: T12: FFH, lat 1 us, pow 1908 mW, 25 % acpicpu0: T13: FFH, lat 1 us, pow 1272 mW, 19 % acpicpu0: T14: FFH, lat 1 us, pow 636 mW, 13 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 acpicpu2 at cpu2: ACPI CPU acpicpu3 at cpu3: ACPI CPU fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2394729720 Hz quality 3000 acpiacad0: AC adapter online. ahcisata0 port 0: device present, speed: 3.0Gb/s ahcisata0 port 1: device present, speed: 1.5Gb/s uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub1: 6 ports with 6 removable, self powered uhub2 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered uhub3 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered IPsec: Initialized Security Association Processing. wd0 at atabus0 drive 0 wd0: <TOSHIBA MK5065GSXF> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors wd0: GPT GUID: 53920a3f-66e4-4b98-98f9-bb479918a1b6 dk0 at wd0: "EFI System Partition", 409600 blocks at 40, type: msdos dk1 at wd0: "xxx", 975093952 blocks at 409640, type: <unknown> dk2 at wd0: "xxx", 1269536 blocks at 975503592, type: <unknown> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags) atapibus0 at atabus1: 1 targets cd0 at atapibus0 drive 0: <HL-DT-ST DVDRW GS31N, KWEBBDB0955, TA17> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) uhub4 at uhub1 port 1: vendor 0424 (0x424) product 2513 (0x2513), class 9/0, rev 2.00/b.b3, addr 2 uhub4: multiple transaction translators uhub5 at uhub2 port 1: vendor 0424 (0x424) product 2513 (0x2513), class 9/0, rev 2.00/b.b3, addr 2 uhub5: multiple transaction translators uhub4: 3 ports with 0 removable, self powered uhub5: 2 ports with 1 removable, self powered uhub6 at uhub4 port 1: Apple Inc. (0xa5c) BRCM2070 Hub (0x4500), class 9/0, rev 2.00/1.00, addr 3 uhub6: 3 ports with 0 removable, self powered uhidev0 at uhub5 port 1 configuration 1 interface 0 uhidev0: Apple Computer, Inc. (0x5ac) IR Receiver (0x8242), rev 2.00/0.16, addr 3, iclass 3/0 uhidev0: 38 report ids uhid0 at uhidev0 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev0 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev0 reportid 38: input=4, output=0, feature=0 uhidev1 at uhub6 port 1 configuration 1 interface 0 uhidev1: vendor 05ac (0x5ac) product 820a (0x820a), rev 2.00/1.00, addr 4, iclass 3/1 uhidev1: 1 report ids ukbd0 at uhidev1 reportid 1: 8 Variable keys, 6 Array codes wskbd0 at ukbd0: console keyboard uhidev2 at uhub6 port 2 configuration 1 interface 0 uhidev2: vendor 05ac (0x5ac) product 820b (0x820b), rev 2.00/1.00, addr 5, iclass 3/1 uhidev2: 2 report ids ums0 at uhidev2 reportid 2: 3 buttons wsmouse0 at ums0 mux 0 ubt0 at uhub6 port 3 ubt0: Apple Inc. (0x5ac) Bluetooth USB Host Controller (0x821a), rev 2.00/0.42, addr 6 uhidev3 at uhub4 port 2 configuration 1 interface 0 uhidev3: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/1.18, addr 7, iclass 3/1 uhidev3: 9 report ids ukbd1 at uhidev3 reportid 1: 8 Variable keys, 6 Array codes, apple fn key wskbd1 at ukbd1 mux 1 uhid3 at uhidev3 reportid 9: input=0, output=0, feature=3 uhidev4 at uhub4 port 2 configuration 1 interface 1 uhidev4: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/1.18, addr 7, iclass 3/0 uhidev4: 68 report ids uhid4 at uhidev4 reportid 68: input=511, output=0, feature=0 uhidev5 at uhub4 port 2 configuration 1 interface 2 uhidev5: Apple Inc. (0x5ac) Apple Internal Keyboard / Trackpad (0x253), rev 2.00/1.18, addr 7, iclass 3/1 uhidev5: 2 report ids ums1 at uhidev5 reportid 2: 3 buttons wsmouse1 at ums1 mux 0 umass0 at uhub4 port 3 configuration 1 interface 0 umass0: SanDisk (0x781) Ultra (0x5581), rev 2.10/1.00, addr 8 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors sd0: GPT GUID: 6f5b2797-02a2-4059-be54-755cff041b57 dk3 at sd0: "EFI system", 262144 blocks at 2048, type: msdos dk4 at sd0: "xxx", 2908160 blocks at 264192, type: ffs uvideo0 at uhub1 port 2 configuration 1 interface 0: Apple Inc. (0x5ac) FaceTime HD Camera (Built-in) (0x8509), rev 2.00/5.16, addr 9 video0 at uvideo0: Apple Inc. (0x5ac) FaceTime HD Camera (Built-in) (0x8509), rev 2.00/5.16, addr 9 WARNING: 11 errors while detecting hardware; check system log. boot device: sd0 root on dk4 root file system type: ffs kern.module.path=/stand/amd64/9.99.9/modules kern info: [drm] Memory usable by graphics device = 2048M clock: unknown CMOS layout kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. kern info: [drm] failed to find VBIOS tables i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) kern info: [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 intelfb0 at i915drmkms0 intelfb0: framebuffer at 0xffff8f8067d7f000, size 1280x800, depth 32, stride 5120 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 wskbd1: connecting to wsdisplay0 /dev/dk4: file system not clean (fs_clean=0x8); please fsck(8) /dev/dk4: lost blocks 0 files 0 acpibat0: state changed on 'charge state' to 'LOW'