Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-09-01 07:49:00
From: mlelstv
Description: RPI4 4GB
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 9.99.9 (EGGHED64) #199: Sun Sep  1 08:15:29 CEST 2019
	mlelstv@gossam:/home/netbsd-current/obj.evbarm64-el/home/netbsd-current/src/sys/arch/evbarm/compile/EGGHED64
total memory = 3940 MB
avail memory = 3687 MB
timecounter: Timecounters tick every 10.000 msec
running cgd selftest aes-xts-256 aes-xts-512 done
armfdt0 (root)
simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.1
simplebus1 at simplebus0 (/soc)
simplebus1: WARNING: power management not supported
simplebus2 at simplebus0 (/clocks)
simplebus2: WARNING: power management not supported
simplebus3 at simplebus0 (/scb)
simplebus3: WARNING: power management not supported
cpus0 at simplebus0 (/cpus)
cpus0: WARNING: power management not supported
simplebus4 at simplebus0 (/v3dbus)
simplebus4: WARNING: power management not supported
simplebus5 at simplebus0 (/chosen)
simplebus5: WARNING: power management not supported
cpu0 at cpus0 (/cpus/cpu@0): Cortex-A72 r0p3 (Cortex V8-A core)
cpu0: package 0, core 0, smt 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64
cpu0: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
cpu0: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
cpu0: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu0: WARNING: power management not supported
cpu1 at cpus0 (/cpus/cpu@1): Cortex-A72 r0p3 (Cortex V8-A core)
cpu1: package 0, core 1, smt 0
cpu1: WARNING: power management not supported
cpu2 at cpus0 (/cpus/cpu@2): Cortex-A72 r0p3 (Cortex V8-A core)
cpu2: package 0, core 2, smt 0
cpu2: WARNING: power management not supported
cpu3 at cpus0 (/cpus/cpu@3): Cortex-A72 r0p3 (Cortex V8-A core)
cpu3: package 0, core 3, smt 0
cpu3: WARNING: power management not supported
simplebus6 at simplebus1 (/soc/firmware)
simplebus6: WARNING: power management not supported
gic0 at simplebus1 (/soc/gic400@40041000): GIC
armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
armgic0: Architecture version 2 (0x43b:32 rev 1)
armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
armgic0: WARNING: power management not supported
gic0: WARNING: power management not supported
bcmcprman0 at simplebus1 (/soc/cprman@7e101000): BCM283x Clock Controller
bcmcprman0: WARNING: power management not supported
fclock0 at simplebus2 (/clocks/clock@3): 54000000 Hz fixed clock (osc)
fclock0: WARNING: power management not supported
bcmaux0 at simplebus1 (/soc/aux@7e215000)
bcmaux0: WARNING: power management not supported
fclock1 at simplebus2 (/clocks/clock@4): 480000000 Hz fixed clock (otg)
fclock1: WARNING: power management not supported
bcmicu0 at simplebus1 (/soc/local_intc@40000000): Multiprocessor
bcmicu0: WARNING: power management not supported
gtmr0 at simplebus0 (/timer): Generic Timer
gtmr0: interrupting on GIC irq 27
armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
timecounter: Timecounter "armgtmr0" frequency 54000000 Hz quality 500
armgtmr0: WARNING: power management not supported
gtmr0: WARNING: power management not supported
gregulator0 at simplebus0 (/sd_io_1v8_reg): vdd-sd-io
gregulator0: autoconfiguration error: cannot get pin 0
gregulator0: WARNING: power management not supported
plcom0 at simplebus1 (/soc/serial@7e201000): ARM PL011 UART
plcom0: txfifo disabled
plcom0: interrupting on GIC irq 153
plcom0: WARNING: power management not supported
com0 at simplebus1 (/soc/serial@7e215040): BCM AUX UART, working fifo
com0: console
com0: interrupting on GIC irq 125
com0: WARNING: power management not supported
fregulator0 at simplebus0 (/fixedregulator_5v0): 5v0
fregulator0: WARNING: power management not supported
fregulator1 at simplebus0 (/fixedregulator_3v3): 3v3
fregulator1: WARNING: power management not supported
/soc/thermal@7d5d2200 at simplebus1 <brcm,avs-tmon-bcm2838> not configured
/soc/dsi@7e209000 at simplebus1 <brcm,bcm2835-dsi0> not configured
bcmgpio0 at simplebus1 (/soc/gpio@7e200000): GPIO controller
bcmgpio0: attach pin 0
bcmgpio0: attach pin 1
bcmgpio0: attach pin 2
bcmgpio0: attach pin 3
bcmgpio0: attach pin 4
bcmgpio0: attach pin 5
bcmgpio0: attach pin 6
bcmgpio0: attach pin 7
bcmgpio0: attach pin 8
bcmgpio0: attach pin 9
bcmgpio0: attach pin 10
bcmgpio0: attach pin 11
bcmgpio0: attach pin 12
bcmgpio0: attach pin 13
bcmgpio0: skip pin 14 - func = 2
bcmgpio0: skip pin 15 - func = 2
bcmgpio0: attach pin 16
bcmgpio0: attach pin 17
bcmgpio0: attach pin 18
bcmgpio0: attach pin 19
bcmgpio0: attach pin 20
bcmgpio0: attach pin 21
bcmgpio0: attach pin 22
bcmgpio0: attach pin 23
bcmgpio0: attach pin 24
bcmgpio0: attach pin 25
bcmgpio0: attach pin 26
bcmgpio0: attach pin 27
bcmgpio0: skip pin 28 - func = 2
bcmgpio0: skip pin 29 - func = 2
bcmgpio0: attach pin 30
bcmgpio0: attach pin 31
bcmgpio0: attach pin 32
bcmgpio0: attach pin 33
bcmgpio0: attach pin 34
bcmgpio0: attach pin 35
bcmgpio0: attach pin 36
bcmgpio0: attach pin 37
bcmgpio0: attach pin 38
bcmgpio0: attach pin 39
bcmgpio0: skip pin 40 - func = 4
bcmgpio0: skip pin 41 - func = 4
bcmgpio0: attach pin 42
bcmgpio0: attach pin 43
bcmgpio0: attach pin 44
bcmgpio0: attach pin 45
bcmgpio0: attach pin 46
bcmgpio0: attach pin 47
bcmgpio0: attach pin 48
bcmgpio0: attach pin 49
bcmgpio0: attach pin 50
bcmgpio0: attach pin 51
bcmgpio0: attach pin 52
bcmgpio0: attach pin 53
bcmgpio0: pins 0..31 interrupting on GIC irq 145
bcmgpio0: pins 32..54 interrupting on GIC irq 146
pinctrl: set config pinctrl-0 for /soc/serial@7e201000
pinctrl: set config pinctrl-0 for /soc/serial@7e215040
pinctrl: set config pinctrl-0 for /soc/mmcnr@7e300000
gpio0 at bcmgpio0: 54 pins
bcmgpio0: WARNING: power management not supported
bcmdmac0 at simplebus1 (/soc/dma@7e007000): chanmask=71f5 shifted=1f5 ffs=1: DMA0
bcmdmac0: WARNING: power management not supported
/soc/power at simplebus1 <raspberrypi,bcm2835-power> not configured
/phy at simplebus0 <usb-nop-xceiv> not configured
bcmmbox0 at simplebus1 (/soc/mailbox@7e00b880): VC mailbox
bcmmbox0: interrupting on GIC irq 65
vcmbox0 at bcmmbox0
vcmbox0: WARNING: power management not supported
bcmmbox0: WARNING: power management not supported
bcmpmwdog0 at simplebus1 (/soc/watchdog@7e100000): Power management, Reset and Watchdog controller
bcmpmwdog0: WARNING: power management not supported
/scb/pcie@7d500000 at simplebus3 <brcm,bcm7211-pcie> <brcm,bcm7445-pcie> <brcm,pci-plat-dev> not configured
/scb/genet@7d580000 at simplebus3 <brcm,genet-v5> not configured
bcm2838rng0 at simplebus1 (/soc/rng@7e104000): Hardware RNG
bcm2838rng0: WARNING: power management not supported
sdhc0 at simplebus1 (/soc/mmcnr@7e300000): SDHC controller
sdhc0: ref freq 200000 kHz
sdhc0: interrupting on GIC irq 158
gpioleds0 at simplebus0 (/leds): led0
gpioleds0: WARNING: power management not supported
/soc/firmware/gpio at simplebus6 <raspberrypi,firmware-gpio> not configured
dwctwo0 at simplebus1 (/soc/usb@7e980000): USB controller
dwctwo0: interrupting on GIC irq 105
sdhc1 at simplebus1 (/soc/emmc2@7e340000): SDHC controller
sdhc1: ref freq 100000 kHz
sdhc1: interrupting on GIC irq 158
/soc/fb at simplebus1 <brcm,bcm2708-fb> not configured
/soc/vcsm at simplebus1 <raspberrypi,bcm2835-vcsm> not configured
/soc/virtgpio at simplebus1 <brcm,bcm2835-virtgpio> not configured
bcmdmac1 at simplebus3 (/scb/dma@7e007b00): chanmask=71f5 shifted=0 ffs=0autoconfiguration error: : all channels masked
bcmdmac1: WARNING: power management not supported
bcmmbox1 at simplebus3 (/scb/mailbox@7e00b840): VC mailbox
bcmmbox1: interrupting on GIC irq 66
vcmbox1 at bcmmbox1
vcmbox1: WARNING: power management not supported
bcmmbox1: WARNING: power management not supported
armpmu0 at simplebus0 (/arm-pmu): Performance Monitor Unit
/soc/gpiomem at simplebus1 <brcm,bcm2835-gpiomem> not configured
/scb/hevc-decoder@7eb00000 at simplebus3 <raspberrypi,argon-hevc-decoder> not configured
/scb/argon-local-intc@7eb10000 at simplebus3 <raspberrypi,argon-local-intc> not configured
/scb/h264-decoder@7eb20000 at simplebus3 <raspberrypi,argon-h264-decoder> not configured
/scb/vp9-decoder@7eb30000 at simplebus3 <raspberrypi,argon-vp9-decoder> not configured
simplebus0: WARNING: power management not supported
armfdt0: WARNING: power management not supported
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu_boot_secondary_processors: writing mbox with 0xe
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64
cpu3: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
cpu3: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
cpu3: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64
cpu2: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
cpu2: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
cpu2: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64
cpu1: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
cpu1: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
cpu1: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu_boot_secondary_processors: secondary processors hatched
sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
sdhc0: WARNING: power management not supported
dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
usb0 at dwctwo0: USB revision 2.0
sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc1 slot 0
sdhc1: WARNING: power management not supported
uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
update power 7
update power 7
armpmu0: interrupting on GIC irq 48
armpmu0: interrupting on GIC irq 49
armpmu0: interrupting on GIC irq 50
armpmu0: interrupting on GIC irq 51
armpmu0: WARNING: power management not supported
dwctwo0: WARNING: power management not supported
sdhc0: cmd timeout error
sdhc1: cmd timeout error
sdmmc1: SD card status: 4-bit, C10, U1
ld1 at sdmmc1: <0x03:0x5344:SU32G:0x80:0x22ae1589:0x0db>
ld1: WARNING: power management not supported
ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
dk0 at ld1: "ld1a", 42916096 blocks at 458752, type: ffs
dk1 at ld1: "ld1b", 262144 blocks at 196608, type: swap
dk2 at ld1: "ld1e", 163840 blocks at 32768, type: msdos
ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
IPsec: Initialized Security Association Processing.
sdmmc0: MAX_BLK_SIZE1 = 64
sdmmc0: MAX_BLK_SIZE2 = 512
sdmmc0: MAX_BLK_SIZE3 = 512
sdmmc0: SDIO function
bwfm0 at sdmmc0 function 1
bwfm0: WARNING: power management not supported
(manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
(manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
iscsi: attached.  major = 203
WARNING: 2 errors while detecting hardware; check system log.
boot device: ld1
root on dk0 dumps on dk1
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
kern.module.path=/stand/evbarm/9.99.9/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
bwfm0: wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
bwfm0: address xx:xx:xx:xx:xx:xx
bwfm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
bwfm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwfm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
init: copying out path `/sbin/init' 11