Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-10-10 11:36:42
From: ng0
Description: Samsung NP-R519
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3066 MB
avail memory = 2954 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SAMSUNG ELECTRONICS CO., LTD. R519/R719 (Not Applicable)
mainbus0 (root)
ACPI: RSDP 0x00000000000F72C0 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFDF8192 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFDE8000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BFDE9000 0069F8 (v02 Intel CANTIGA 06040000 INTL 20050624)
ACPI: FACS 0x00000000BFD9EFC0 000040
ACPI: FACS 0x00000000BFD9EFC0 000040
ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BFDFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFDFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x00000000BFDFEE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: SSDT 0x00000000BFDE7000 0005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFDE6000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BFDE5000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <SECCSD,LH43STAR,06040000>, AslId < LTP,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE804552DC88 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80455ED008 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80454F9A08 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE804551ED78 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (NVID): ACPI Display Adapter
acpiout0 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: [26,34,44,57,69,80,90,100]
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output Device
acpivga0: unknown output device acpiout3
acpivga0: connected output devices:
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
CDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 89.0 C, passive 88.0 C, passive cooling
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 89.0 C, passive 88.0 C, passive cooling
ACPI: Enabled 9 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.3
pms0: Palm detect, Two button click pad
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 2a41 (rev. 0x07)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: vendor 10de product 0a68 (rev. 0xa2)
drm kern info: nouveau [ DEVICE][nouveau0] BOOT0 : 0x0a8400a2
drm kern info: nouveau [ DEVICE][nouveau0] Chipset: GT218 (NVA8)
drm kern info: nouveau [ DEVICE][nouveau0] Family : NV50
drm kern info: nouveau [ VBIOS][nouveau0] checking PRAMIN for image...
drm kern info: nouveau [ VBIOS][nouveau0] ... appears to be valid
drm kern info: nouveau [ VBIOS][nouveau0] using image from PRAMIN
drm kern info: nouveau [ VBIOS][nouveau0] BIT signature found
drm kern info: nouveau [ VBIOS][nouveau0] version 70.18.2b.00.ff
nouveau0: interrupting at ioapic0 pin 16 (nouveau)
drm kern info: nouveau [ PFB][nouveau0] RAM type: DDR3
drm kern info: nouveau [ PFB][nouveau0] RAM size: 512 MiB
drm kern info: nouveau [ PFB][nouveau0] ZCOMP: 960 tags
drm kern info: nouveau [ VOLT][nouveau0] GPU voltage: 850000uv
drm kern info: nouveau [ PTHERM][nouveau0] FAN control: none / external
drm kern info: nouveau [ PTHERM][nouveau0] fan management: automatic
drm kern info: nouveau [ PTHERM][nouveau0] internal sensor: yes
drm kern info: nouveau [ CLK][nouveau0] 03: core 135 MHz shader 270 MHz memory 135 MHz
drm kern info: nouveau [ CLK][nouveau0] 07: core 405 MHz shader 810 MHz memory 405 MHz
drm kern info: nouveau [ CLK][nouveau0] 0f: core 535 MHz shader 1230 MHz memory 790 MHz
drm kern info: nouveau [ CLK][nouveau0] --: core 405 MHz shader 810 MHz memory 405 MHz
Zone kernel: Available graphics memory: 788844 kiB
drm kern info: nouveau [ DRM] VRAM: 512 MiB
drm kern info: nouveau [ DRM] GART: 1048576 MiB
drm kern info: nouveau [ DRM] TMDS table version 2.0
drm kern info: nouveau [ DRM] DCB version 4.0
drm kern info: nouveau [ DRM] DCB outp 00: 01000323 00010034
drm kern info: nouveau [ DRM] DCB outp 01: 02011300 00000000
drm kern info: nouveau [ DRM] DCB conn 00: 00000040
drm kern info: nouveau [ DRM] DCB conn 01: 00000100
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm kern info: nouveau [ DRM] MM: using COPY for buffer copies
nouveaufb0 at nouveau0
nouveau0: info: registered panic notifier
nouveaufb0: framebuffer at 0xffff8000588ed000, size 1366x768, depth 32, stride 5632
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 19
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
ppb1 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci2 dev 0 function 0: Atheros AR9285
athn0: rev 2 (1T1R), ROM rev 13, address [_MAC_XXXXXXXXXX]
athn0: interrupting at ioapic0 pin 16
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 2946 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at msi1 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 19
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 23888 mW, 1600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: T0: FFH, lat 1 us, pow 15000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 13125 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 11250 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 9375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7500 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5625 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3750 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1875 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
drm kern error: nouveau E[ PDISP][nouveau0] INVALID_STATE [UNK0B] chid 1 mthd 0x0080 data 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] Base 0:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0084: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0088: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x008c: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0090: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0094: 0x00000000 -> 0xcafe0000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00a0: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00a4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c0: 0x00000000 -> 0x01000003
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00c8: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00cc: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e0: 0x00000000 -> 0x40000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e4: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00e8: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00ec: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x00fc: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0100: 0xfffe0000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0104: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0110: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0114: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 0:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0800: 0x00000000 -> 0x00000700
drm kern error: nouveau E[ PDISP][nouveau0] 0x0804: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0808: 0x00000000 -> 0x03000556
drm kern error: nouveau E[ PDISP][nouveau0] 0x080c: 0x00000000 -> 0x00101600
drm kern error: nouveau E[ PDISP][nouveau0] 0x0810: 0x0000e900 -> 0x0000cf00
drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 1:
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c00: 0x00000000 -> 0x00000700
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c04: 0x00000000
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c08: 0x00000000 -> 0x03000556
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c0c: 0x00000000 -> 0x00101600
drm kern error: nouveau E[ PDISP][nouveau0] 0x0c10: 0x0000e900 -> 0x0000cf00
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM320II>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW TS-L633C, d1G3456789KL4N4P, SC00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uvideo0 at uhub3 port 3 configuration 1 interface 0: Vimicro Corp. (0xac8) WebCam SCB-0320N (0xc33e), rev 2.00/1.00, addr 2
video0 at uvideo0: Vimicro Corp. (0xac8) WebCam SCB-0320N (0xc33e), rev 2.00/1.00, addr 2
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.1/modules
WARNING: clock gained 22 days
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)