Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-10-19 14:47:43
From: tsutsui
Description: NetBSD/zaurus 7.2 on SL-C1000 (serial console)
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.2 (GENERIC.201808291900Z)
total memory = 65536 KB
avail memory = 57964 KB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/zaurus/7.2/modules
mainbus0 (root)
cpu0 at mainbus0 core 0: PXA27x rev 7 (XScale V5TE core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB/32B 32-way L1 VIVT Instruction cache
cpu0: 32KB/32B 32-way write-back-locking L1 VIVT Data cache
pxaip0 at mainbus0: Onchip Peripheral Bus
pxaip0: CPU clock = 416.002 MHz
pxaip0: kernel is configured for PXA250 and PXA270, cpu type is PXA270
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller
com0 at pxaip0 a: ns16550a, working fifo
com0: console
com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo
com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo
ohci0 at pxaip0 addr 0x4c000000-0x4c00006f intr 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
lcd0 at pxaip0: PXA2x0 LCD controller
wsdisplay0 at lcd0 kbdmux 1
pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller
pxapcic0 at pxaip0: 1 slot
pcmcia0 at pxapcic0
pxartc0 at pxaip0 addr 0x40900000-0x4090000f: Real-time Clock
pxamci0 at pxaip0 addr 0x41100000-0x41100047: MMC/SD Controller
pxamci0: using DMA transfer
sdmmc0 at pxamci0
ziic0 at pxaip0 addr 0x40300000-0x403016a3: I2C controller
iic0 at ziic0: I2C bus
ioexp0 at iic0 addr 0x18: GPIO controller
zaudio0 at iic0 addr 0x1b: I2S, WM8750 Audio
audio0 at zaudio0: half duplex, playback, capture, mmap, independent
scoop0 at pxaip0: PCMCIA/GPIO controller
zssp0 at pxaip0
lcdctl0 at zssp0
ztp0 at zssp0
wsmouse0 at ztp0 mux 0
zkbd0 at pxaip0
wskbd0 at zkbd0 mux 1
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
zapm0 at pxaip0: pseudo power management module
apmdev0 at zapm0: Power Management spec V1.2
zusb0 at pxaip0: USB Mode detection
clock: hz=100 stathz=64
ne0 at pcmcia0 function 0: <Ethernet, CF Size PC Card, 1.0, >
ne0: Ethernet address [_MAC_XXXXXXXXXX]
uhub0 at usb0: PXA27x OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
ld0 at sdmmc0: <0x13:0x4b47:SD08G:0x00:0x621e3d67:0x0ab>
ld0: 7595 MB, 3857 cyl, 64 head, 63 sec, 512 bytes/sect x 15554560 sectors
ld0: 4-bit width, bus clock 19.500 MHz
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
Sat Oct 19 23:10:55 JST 2019
Starting root file system check:
/dev/rld0a: file system is clean; not checking
swapctl: setting dump device to /dev/ld0b
swapctl: adding /dev/ld0b as swap device at priority 0
Starting file system checks:
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: zaurus
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD completion for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
swapctl: setting dump device to /dev/ld0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Sat Oct 19 23:28:56 JST 2019