Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-10-21 07:05:51
From: gemoraes
Description: FreeBSD 13.0-CURRENT on IdeaPad S210 Touch
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r353709: Fri Oct 18 05:49:35 UTC 2019
    xxx@xxx.xxx:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (1795.96-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8136691712 (7759 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO CB-01   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 2 3
Timecounter "TSC" frequency 1795956852 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000046 [4335] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8105a240, 0) error 19
[ath_hal] loaded
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
acpi0: <LENOVO CB-01>
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [ECRM] (0xfffff80003768d80) [EmbeddedControl] (20190703/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190703/exfldio-428)
ACPI Error: Aborting method \134_SB.PCI0.LPCB.H_EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20190703/psparse-689)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc0600000-0xc060ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xc0619000-0xc06193ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Panther Point HDA Controller> mem 0xc0610000-0xc0613fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Qualcomm Atheros AR9565> mem 0xc0500000-0xc057ffff irq 17 at device 0.0 on pci2
ath0: WB335 2-ANT card detected
ath0: Bluetooth Antenna Diversity card detected
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: QCA9565 mac 704.1 RF5110 phy 819.3
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xc0404000-0xc0404fff,0xc0400000-0xc0403fff irq 18 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xc0618000-0xc06183ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xc0617000-0xc06177ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Elantech Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 25,26 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
uhub2 on usbus2
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
ada0: <ST500LT012-9WS142 0001LVM1> ATA8-ACS SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus0 target 0
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 8 ports with 8 removable, self powered
acpi_ec0: EcCommand: no response to 0x84
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 1> on usbus0
acpi_ec0: EcCommand: no response to 0x84
acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE
Root mount waiting for: usbus2 usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 4 ports with 4 removable, self powered
acpi_ec0: EcCommand: no response to 0x84
Root mount waiting for: usbus2 usbus1 usbus0
ugen0.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0
ukbd0 on uhub3
ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 2> on usbus0
kbd2 at ukbd0
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
acpi_ec0: EcCommand: no response to 0x84
acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE
ugen0.4: <Generic USB2.0-CRW> at usbus0
ugen1.3: <ELAN Touchscreen> at usbus1
acpi_ec0: EcCommand: no response to 0x84
Root mount waiting for: usbus1 usbus0
ugen1.4: <vendor 0x0cf3 product 0x3004> at usbus1
acpi_ec0: EcCommand: no response to 0x84
acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE
ugen1.5: <Azurewave Lenovo EasyCamera> at usbus1
acpi_ec0: EcCommand: no response to 0x84
Root mount waiting for: usbus0
ugen0.5: <Generic USB3.0 Card Reader> at usbus0
umass0 on uhub1
umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.32, addr 4> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ABORTED COMMAND asc:30,0 (Incompatible medium installed)
(probe0:umass-sim0:0:0:0): Retrying command (per sense data)
acpi_ec0: EcCommand: no response to 0x84
acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic STORAGE DEVICE 1532> Removable Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 400.000MB/s transfers
da0: 1938MB (3970048 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
random: unblocking device.
lo0: link state changed to UP
re0: link state changed to DOWN
uhid0 on uhub3
uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 2> on usbus0
wmt0 on uhub4
wmt0: <ELAN Touchscreen, class 0/0, rev 2.00/0.12, addr 3> on usbus1
wmt0: 10 contacts and [WH]. Report range [0:0] - [3264:1856]