Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-11-02 18:58:06
From: zeurkous
Description: NetBSD 8.1 (INSTALL) on Thinkpad R60e (type 9461)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.1 (INSTALL) #0: Fri May 31 08:43:59 UTC 2019
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/INSTALL
total memory = 3070 MB
avail memory = 2999 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 9461DXG (ThinkPad R60)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6840 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFED1674 000084 (v01 LENOVO TP-7C 00002050 LTP 00000000)
ACPI: FACP 0x00000000BFED1800 0000F4 (v03 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-642)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170303/tbfadt-693)
ACPI: DSDT 0x00000000BFED1C32 00D1BF (v01 LENOVO TP-7C 00002050 MSFT 0100000E)
ACPI: FACS 0x00000000BFEF4000 000040
ACPI: FACS 0x00000000BFEF4000 000040
ACPI: SSDT 0x00000000BFED19B4 00027E (v01 LENOVO TP-7C 00002050 MSFT 0100000E)
ACPI: ECDT 0x00000000BFEDEDF1 000052 (v01 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI: TCPA 0x00000000BFEDEE43 000032 (v02 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI: APIC 0x00000000BFEDEE75 000068 (v01 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI: MCFG 0x00000000BFEDEEDD 00003C (v01 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI: HPET 0x00000000BFEDEF19 000038 (v01 LENOVO TP-7C 00002050 LNVO 00000001)
ACPI: BOOT 0x00000000BFEDEFD8 000028 (v01 LENOVO TP-7C 00002050 LTP 00000001)
ACPI: SSDT 0x00000000BFEF2655 00025F (v01 LENOVO TP-7C 00002050 INTL 20050513)
ACPI: SSDT 0x00000000BFEF28B4 0000A6 (v01 LENOVO TP-7C 00002050 INTL 20050513)
ACPI: SSDT 0x00000000BFEF295A 0004F7 (v01 LENOVO TP-7C 00002050 INTL 20050513)
ACPI: SSDT 0x00000000BFEF2E51 0001D8 (v01 LENOVO TP-7C 00002050 INTL 20050513)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, id 0x6f6
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: feature mismatch: cpu_feature[2] is 0x20000000, but CPU reported 0x20100000
cpu1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz, id 0x6f6
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <LENOVO,TP-7C ,00002050>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4CA1944 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4CCD004 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4959B74 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4CA0E74 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FPU (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: sa~wsoni LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [30,40,50,60,70,80,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0200 (acpiout2): TV, head 0
acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 27a0 (rev. 0x03)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 27a1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: vendor 1002 product 7145 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 11d4 product 1981
hdafg0: DAC00 2ch: Speaker [Jack & Built-In]
hdafg0: ADC01 2ch: CD [Built-In], Mic In [Jack & Built-In]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
hdvsmfg at hdaudio0 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at msi1 vec 0
bge0: HW config 00080115, 00004015, 00000038, 00000000 00000000
bge0: ASIC BCM5750 C1 (0x4201), Ethernet address XX:CE:NS:OR:ED:XX
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 5212
ath0: interrupting at ioapic0 pin 17
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ppb3 at pci0 dev 28 function 2: vendor 8086 product 27d4 (rev. 0x02)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 12
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 104c product 8039 (rev. 0x00)
fwohci0 at pci6 dev 0 function 1: vendor 104c product 803a (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:16:a3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
cbb0: cacheline 0x8 lattimer 0xa8
cbb0: bhlc 0x82a808
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c5 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc710ff03<PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: ATML 97SC3203 rev 0x5
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 1833 MHz
acpicpu0: P1: FFH, lat 10 us, pow 20000 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13000 mW, 1000 MHz
acpicpu0: T0: FFH, lat 1 us, pow 13000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 11375 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 9750 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8125 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6500 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4875 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3250 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1625 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
fwohci0: phy int
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
atapibus0 at atabus0: 2 targets
uhub0 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb4: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
uhub2 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GMA-4082N, M006BAG0410, CX08> cdrom removable
uhub3 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0
wd0: <WDC WD3200BEVT-22ZCT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
WARNING: 2 errors while detecting hardware; check system log.
boot device: <unknown>
md0: internal 5000 KB image area
root on md0a dumps on md0b
root file system type: ffs
kern.module.path=/stand/i386/8.1/modules
WARNING: clock gained 147 days
warning: no /dev/console
ugen0 at uhub4 port 2
ugen0: STMicroelectronics (0x483) Biometric Coprocessor (0x2016), rev 1.00/0.01, addr 2
acpibat0: normal capacity on 'charge state'