Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-12-07 10:22:12
From: yamori813
Description: Nec_WR8170N
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 bffc82d323c-c265409(zrouter)-dirty: Sat Dec  7 19:14:39 JST 2019
    hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/mips.mips/sys/Nec_WR8170N mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803bea28.
CPU model: Atheros AR7241 rev 1
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00459000 - 0x03ef2fff, 61448192 bytes (15002 pages)
avail memory = 60694528 (57MB)
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ULE: setup cpu 0
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0
mdio0: <MDIO> on argemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0
mdio1: <MDIO> on argemdio1
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1
arswitch0: ar9340_hw_global_setup: GMII
arswitch0: ar9340_hw_global_setup: PHY4 - CPU
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0004, rev. 1
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0004, rev. 1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0004, rev. 1
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0004, rev. 1
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
mdio2: <MDIO> on arswitch0
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2
etherswitch0: <Switch controller> on arswitch0
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x1
gpio0: function_clear: 0x4
gpio0: gpio pinmask=0xc19c3
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Generating random ethernet address.
miiproxy0: <MII/MDIO proxy, MII side> on arge0
miiproxy0: attached to target mdio2
arge0: finishing attachment, phymask 0010, proxy set 
miibus4: <MII bus> on miiproxy0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00c82e, model 0x0004, rev. 1
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: arge_attach: overriding MII mode to 'GMII'
arge1: Generating random ethernet address.
ar71xx_chip_set_mii_if: invalid MII mode (1) for unit 1
mii_attach_proxy: not attaching, no mdio device hint for arge1
arge1: finishing attachment, phymask 0000, proxy null 
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
pcib0 at irq 0 on nexus0
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x168c, dev=0xff1c, revid=0x01
	domain=0, bus=0, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 1 message
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0, size 16, enabled
pci0: <network, ethernet> at device 0.0 (no driver attached)
spi0: <AR71XX SPI> at mem 0x1f000000-0x1fffffff on nexus0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/uboot"
MAP: flash/spi0: 40000x10000, data=0x10000 "/dev/map/uboot_environ"
MAP: flash/spi0: 50000x7a0000, data=0x7a0000 "/dev/map/upgrade"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: flash/spi0: 50000x100000, data=0x100000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: flash/spi0: 150000x690000, data=0x690000 "/dev/map/rootfs"
MAP: flash/spi0: 7f0000x10000, data=0x10000 "/dev/map/ART"
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME
arge0: link state changed to UP