Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-12-21 14:49:36
From: tsutsui
Description: NetBSD/i386 9.0_RC1 ASRock AM2NF3-VSTA (ACPI disabled)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 UTC 2019 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC total memory = 3071 MB avail memory = 3000 MB rnd: seeded with 256 bits timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.) mainbus0 (root) cpu0 at mainbus0 cpu0: AMD Athlon(tm) 64 Processor 3500+, id 0x40ff2 cpu0: package 0, core 0, smt 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 10de product 00e1 (rev. 0xa1) agp0 at pchb0: 1 Miscellaneous Control unit(s) found. agp0: aperture at 0xc0000000, size 0x10000000 pcib0 at pci0 dev 1 function 0: vendor 10de product 00e0 (rev. 0xa2) nfsmbc0 at pci0 dev 1 function 1: vendor 10de product 00e4 (rev. 0xa1) nfsmb0 at nfsmbc0 SMBus 1 iic0 at nfsmb0: I2C bus nfsmb1 at nfsmbc0 SMBus 2 iic1 at nfsmb1: I2C bus ohci0 at pci0 dev 2 function 0: vendor 10de product 00e7 (rev. 0xa1) ohci0: interrupting at irq 3 ohci0: OHCI version 1.0, legacy support ohci0: autoconfiguration error: SMM does not respond, resetting usb0 at ohci0: USB revision 1.0 ohci1 at pci0 dev 2 function 1: vendor 10de product 00e7 (rev. 0xa1) ohci1: interrupting at irq 5 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 ehci0 at pci0 dev 2 function 2: vendor 10de product 00e8 (rev. 0xa2) ehci0: interrupting at irq 9 ehci0: EHCI version 1.0 ehci0: 2 companion controllers, 4 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 nfe0 at pci0 dev 5 function 0: vendor 10de product 00df (rev. 0xa2) nfe0: interrupting at irq 11 nfe0: Ethernet address [_MAC_XXXXXXXXXX] rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto viaide0 at pci0 dev 8 function 0: NVIDIA nForce3 250 IDE Controller (rev. 0xa2) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 viaide1 at pci0 dev 10 function 0: NVIDIA nForce3 250 Serial ATA Controller (rev. 0xa2) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode viaide1: using irq 10 for native-PCI interrupt atabus2 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus3 at viaide1 channel 1 ppb0 at pci0 dev 11 function 0: vendor 10de product 00e2 (rev. 0xa2) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled radeon0 at pci1 dev 0 function 0: vendor 1002 product 4151 (rev. 0x00) radeon0: autoconfiguration error: unable to reserve VGA registers for i386 radeondrmkms hack vendor 1002 product 4171 (miscellaneous display) at pci1 dev 0 function 1 not configured ppb1 at pci0 dev 14 function 0: vendor 10de product 00ed (rev. 0xa2) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled pchb1 at pci0 dev 24 function 0: vendor 1022 product 1100 (rev. 0x00) pchb2 at pci0 dev 24 function 1: vendor 1022 product 1101 (rev. 0x00) pchb3 at pci0 dev 24 function 2: vendor 1022 product 1102 (rev. 0x00) amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (K8: core rev DH-F2, socket AM2) isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 powernow0 at cpu0: AMD PowerNow! timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec IPsec: Initialized Security Association Processing. uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered umass0 at uhub2 port 1 configuration 1 interface 0 umass0: BUFFALO (0x411) USB Flash Disk (0x23a), rev 2.10/1.10, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 1.00> disk removable sd0: fabricating a geometry sd0: 29592 MB, 29592 cyl, 64 head, 32 sec, 512 bytes/sect x 60604416 sectors sd0: fabricating a geometry wd0 at atabus0 drive 0 wd0: <ST380011A> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <MATSHITA CP-589, , EF0X> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd0(viaide0:1:0): using PIO mode 4, DMA mode 2 (using DMA) WARNING: 2 errors while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/i386/9.0/modules kern info: [drm] initializing kernel modesetting (RV350 0x1002:0x4151 0x18BC:0x0230). kern info: [drm] register mmio base: 0xfebe0000 kern info: [drm] register mmio size: 65536 radeon0: info: GTT: 256M 0xC0000000 - 0xCFFFFFFF kern info: [drm] Generation 2 PCI interface, using max accessible memory radeon0: info: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (128M used) kern info: [drm] Detected VRAM RAM=100M, BAR=256M kern info: [drm] RAM width 64bits DDR Zone kernel: Available graphics memory: 1298258 kiB kern info: [drm] radeon: 128M of VRAM memory ready kern info: [drm] radeon: 256M of GTT memory ready. kern info: [drm] radeon: 1 quad pipes, 1 Z pipes initialized. radeon0: info: WB disabled radeon0: info: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0x0xdd153000 kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. radeon0: interrupting at irq 11 (radeon0) kern info: [drm] radeon: irq initialized. kern info: [drm] Loading R300 Microcode WARNING: NVRAM century is 112 but RTC year is 2019 kern info: [drm] radeon: ring at 0x00000000C0001000 kern info: [drm] ring test succeeded in 0 usecs kern info: [drm] ib test succeeded in 0 usecs kern info: [drm] Radeon Display Connectors kern info: [drm] Connector 0: kern info: [drm] VGA-1 kern info: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 kern info: [drm] Encoders: kern info: [drm] CRT1: INTERNAL_DAC1 kern info: [drm] Connector 1: kern info: [drm] DVI-I-1 kern info: [drm] HPD1 kern info: [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 kern info: [drm] Encoders: kern info: [drm] CRT2: INTERNAL_DAC2 kern info: [drm] DFP1: INTERNAL_TMDS1 kern info: [drm] Connector 2: kern info: [drm] SVIDEO-1 kern info: [drm] Encoders: kern info: [drm] TV1: INTERNAL_DAC2 radeondrmkmsfb0 at radeon0 radeondrmkmsfb0: framebuffer at 0xdd360000, size 1920x1080, depth 32, stride 7680 wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 uhidev0 at uhub0 port 4 configuration 1 interface 0 uhidev0: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/67.00, addr 2, iclass 3/1 ums0 at uhidev0: 8 buttons, W and Z dirs wsmouse0 at ums0 mux 0 uaudio0 at uhub1 port 4 configuration 1 interface 0 uaudio0: C-Media Electronics Inc. (0xd8c) PnP Audio Device (0x201), rev 1.10/0.10, addr 2 uaudio0: audio rev 1.00 audio0 at uaudio0: playback, capture, full duplex, independent audio0: slinear_le:16 8ch 48000Hz, blk 60ms for playback audio0: slinear_le:16 2ch 48000Hz, blk 60ms for recording wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation)