Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-12-26 03:12:39
From: ganbold
Description: Marvell Armada 3720 Community Board ESPRESSOBin v4 (arm64)
Uptime:TIM-1.0
WTMI-devel-18.12.1-e6bb176
WTMI: system early-init
CPU VDD voltage default value: 1.202V
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL1: Built : 16:23:26, May 21 2019
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL2: Built : 16:23:27, May 21 2019
NOTICE:  BL1: Booting BL31
NOTICE:  BL31: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL31: Built : 16

U-Boot 2018.03-devel-18.12.3-gc9aa92c-armbian (Feb 20 2019 - 09:45:04 +0100)

Model: Marvell Armada 3720 Community Board ESPRESSOBin
       CPU     1200 [MHz]
       L2      800 [MHz]
       TClock  200 [MHz]
       DDR     750 [MHz]
DRAM:  1 GiB
Comphy chip #0:
Comphy-0: USB3          5 Gbps
Comphy-1: PEX0          2.5 Gbps
Comphy-2: SATA0         6 Gbps
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
MMC:   sdhci@d0000: 0, sdhci@d8000: 1
Loading Environment from SPI Flash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
OK
Model: Marvell Armada 3720 Community Board ESPRESSOBin
Net:   eth0: neta@30000 [PRIME]
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
672160 bytes read in 61 ms (10.5 MiB/s)
16088 bytes read in 21 ms (748 KiB/s)
## Starting EFI application at 07000000 ...
WARNING: using memory device/image path, this may confuse some payloads!
Scanning disk [_EMAIL_XXXXXX]...
Card did not respond to voltage select!
Scanning disk [_EMAIL_XXXXXX]...
Disk [_EMAIL_XXXXXX] not ready
Found 3 disks
Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0:
MMC: block number 0x751801 exceeds max(0x751800)
efipart_readwrite: rw=1, blk=7673849 size=8 status=7
MMC: block number 0x751801 exceeds max(0x751800)
efipart_readwrite: rw=1, blk=7673849 size=8 status=7
MMC: block number 0x751801 exceeds max(0x751800)
efipart_readwrite: rw=1, blk=7673849 size=8 status=7
FreeBSD/arm64 EFI loader, Revision 1.1
(Sat Dec 14 19:58:45 UTC 2019 tsgan@nanopc-t4)

   Command line arguments: loader.efi rootdev=disk0p2
   Image base: 0x7000000
   EFI version: 2.70
   EFI Firmware: Das U-Boot (rev 0.00)
   Console: efi (0x1000)
   Load Path: /MemoryMapped(0x1,0x7000000,0x70a41a0)
    Setting currdev to configured rootdev disk0p2
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
console vidconsole is invalid!
no valid consoles!
Available consoles:
    efi
Loading /boot/loader.conf.local
[H[J[8;48H  ```                        `[9;48H s` `.....---.......--.```   -/[10;48H +o   .--`         /y:`      +.[11;48H  yo`:.            :o      `+-[12;48H   y/               -/`   -o/[13;48H  .-                  ::/sy+:.[14;48H  /                     `--  /[15;48H `:                          :`[16;48H `:                          :`[17;48H  /                          /[18;48H  .-                        -.[19;48H   --                      -.[20;48H    `:`                  `:`[21;48H      .--             `--.[22;48H         .---.....----.[1;2H  ______               ____   _____ _____  [2;2H |  ____|             |  _ \ / ____|  __ \ [3;2H | |___ _ __ ___  ___ | |_) | (___ | |  | |[4;2H |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |[5;2H | |   | | |  __/  __/| |_) |____) | |__| |[6;2H | |   | | |    |    ||     |      |      |[7;2H |_|   |_|  \___|\___||____/|_____/|_____/ [9;2H╔[22;2H╚[9;44H╗[22;44H╝[9;3H═════════════════════════════════════════[22;3H═════════════════════════════════════════[10;2H║[10;44H║[11;2H║[11;44H║[12;2H║[12;44H║[13;2H║[13;44H║[14;2H║[14;44H║[15;2H║[15;44H║[16;2H║[16;44H║[17;2H║[17;44H║[18;2H║[18;44H║[19;2H║[19;44H║[20;2H║[20;44H║[21;2H║[21;44H║[9;23H[11;5H1. Boot Multi user [Enter][12;5H2. Boot Single user[13;5H3. Escape to loader prompt[14;5H4. Reboot[15;5H[16;5HOptions:[17;5H5. Kernel: default/kernel (1 of 1)[18;5H6. Boot Options[25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
[25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
[25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
[25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
[25;0HLoading kernel...
/boot/kernel/kernel text=0x9844bc data=0x190498 data=0x0+0x79d160 syms=[0x8+0x145890+0x8+0x1304e8]
Loading configured modules...
/boot/kernel/if_bridge.ko text=0x3748 text=0x6210 data=0xd38+0x8 syms=[0x8+0x1ab8+0x8+0x14ce]
/boot/kernel/pfsync.ko text=0x30af text=0x6790 data=0xaa0+0x8 syms=[0x8+0x17d0+0x8+0x113d]
/boot/kernel/if_enc.ko text=0x166c text=0x9e0 data=0x758 syms=[0x8+0xcd8+0x8+0xb6d]
/boot/kernel/if_gre.ko text=0x2601 text=0x48b0 data=0x860+0x40 syms=[0x8+0x16c8+0x8+0xf1e]
/boot/kernel/carp.ko text=0x3660 text=0x5e70 data=0xbd8+0x48 syms=[0x8+0x1998+0x8+0x11f4]
/boot/entropy size=0x1000
/boot/kernel/pf.ko text=0x66d3 text=0x2d4a0 data=0x4470+0x1c8 syms=[0x8+0x4290+0x8+0x3143]
/boot/kernel/if_lagg.ko text=0x3b56 text=0x7600 data=0xc30+0x8 syms=[0x8+0x1b48+0x8+0x13cf]
/boot/kernel/pflog.ko text=0xf5b text=0x850 data=0x428 syms=[0x8+0xa08+0x8+0x712]
Using DTB provided by EFI at 0x8000000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #47 r356074M: Wed Dec 25 18:52:41 +08 2019
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
KLD file if_bridge.ko is missing dependencies
Starting CPU 1 (1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
MAP 8000000 mode 2 pages 5
MAP 3e623000 mode 2 pages 1
MAP 3ffc5000 mode 2 pages 2
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1
gpiobus1: <OFW GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1
syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on simplebus1
uart0: console (115200,n,8,1)
gpioc0: <GPIO controller> on gpio0
syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
gpioc1: <GPIO controller> on gpio1
mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
mvneta0: version is 10
mvneta0: Ethernet address: [_MAC_XXXXXXXXXX]
mdio0: <MDIO> on mvneta0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
e6000sw0: <Marvell 88E6341> on mdio0
e6000sw0: multi-chip addressing mode (0x1)
e6000sw0: CPU port at 0
e6000sw0: fixed port at 0
e6000sw0: PHY at port 1
miibus0: <MII bus> on e6000sw0
e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: PHY at port 2
miibus1: <MII bus> on e6000sw0
e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: PHY at port 3
miibus2: <MII bus> on e6000sw0
e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: switch is ready.
etherswitch0: <Switch controller> on e6000sw0
xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq 17 on simplebus1
usbus1: EHCI version 1.0
usbus1 on ehci0
syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1
mmc0: <MMC/SD bus> on sdhci_xenon0
ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 27 on simplebus1
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
device_attach: ahcich0 attach returned 6
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
mvneta0: link state changed to UP
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
e6000sw0port1: link state changed to DOWN
e6000sw0port2: link state changed to DOWN
e6000sw0port3: link state changed to DOWN
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Marvell EHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 4GB <SDHC SD04G 0.0 SN 6103B151 MFG 10/2012 by 19 KG> at mmc0 50.0MHz/4bit/65535-block
Release APs...done
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Trying to mount root from ufs:/dev/ufs/OPNsense [rw]...
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
WARNING: WITNESS option enabled, expect reduced performance.
Warning: no time-of-day clock registered, system time will not be set accurately
uhub0: 2 ports with 2 removable, self powered
Mounting filesystems...
uhub1: 1 port with 1 removable, self powered
tunefs: soft updates remains unchanged as enabled
tunefs: file system reloaded
camcontrol: cam_get_device: unable to find device unit number
** /dev/ufs/OPNsense
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 535734 free (374 frags, 66920 blocks, 0.0% fragmentation)
e6000sw0port1: link state changed to UP
Setting hostuuid: e6226322-2731-11ea-ad3c-2ca8bee40b00.
Setting hostid: 0xb957cfc2.
mtree: unknown user `ntpd'
mtree: failed at line 49 of the specification
Configuring crash dump device: /dev/null
.ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.30/mach/CORE
done.
>>> Invoking early script 'update'
Missing /usr/local/etc/pkg/repos/OPNsense.conf
Missing /usr/local/etc/pkg/repos/OPNsense.conf
>>> Invoking early script 'configd'
Starting configd.
>>> Invoking early script 'templates'
Generating configuration: OK
>>> Invoking early script 'backup'
>>> Invoking backup script 'captiveportal'
>>> Invoking backup script 'dhcpleases'
>>> Invoking backup script 'duid'
>>> Invoking backup script 'netflow'
>>> Invoking backup script 'rrd'
>>> Invoking early script '98_carp_maintenance'
>>> Invoking early script 'carp_service_status'
OK
etherswitch0: VLAN mode: DOT1Q
e6000sw0port1: link state changed to DOWN
port1:
	pvid: 10
	flags=0<>
	media: Ethernet autoselect (none)
	status: no carrier
port2:
	pvid: 20
	flags=0<>
	media: Ethernet autoselect (none)
	status: no carrier
vlangroup1:
	vlan: 10
	members 0t,1
vlangroup2:
	vlan: 20
	members 0t,2,3
Launching the init system...done.
Initializing...........done.
Starting device manager...devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
e6000sw0port1: link state changed to UP
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
devmatch: Can't read linker hints file.
done.
Configuring login behaviour...done.
Configuring loopback interface...lo0: link state changed to UP
done.
Configuring kernel modules...done.
Setting up extended sysctls...done.
Setting timezone...done.
Writing firmware setting...
Warning: copy(/usr/local/etc/pkg/repos/OPNsense.conf.sample): failed to open stream: No such file or directory in /usr/local/etc/inc/system.inc on line 756
done.
Writing trust files...done.
Setting hostname: espress0binv4.local.lan
Generating /etc/hosts...done.
Configuring system logging...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring WAN interface...done.
Configuring LAN interface...done.
Creating IPsec VTI instances...done.
Generating /etc/resolv.conf...done.
Configuring firewall.......done.
Starting PFLOG...done.
Configuring OpenSSH...done.
Starting web GUI...done.
Configuring CRON...done.
Setting up routes...done.
Generating /etc/hosts...done.
lock order reversal:
 1st 0xfffffd0028cab428 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1006
 2nd 0xfffffd0028c8fd88 devfs (devfs) @ /usr/src/sys/kern/vfs_mount.c:1017
stack backtrace:
#0 0xffff00000046ffd0 at witness_debugger+0x64
#1 0xffff0000003dbf60 at lockmgr_lock_fast_path+0x1a8
#2 0xffff0000004e59b0 at _vn_lock+0x58
#3 0xffff0000004cbcdc at vfs_domount+0xbe8
#4 0xffff0000004ca66c at vfs_donmount+0x7c4
#5 0xffff0000004c9e68 at sys_nmount+0x60
#6 0xffff000000752c14 at do_el0_sync+0x514
#7 0xffff000000738224 at handle_el0_sync+0x90
Starting DHCPv4 service...done.
Starting DHCPv6 service...done.
Starting router advertisement service...done.
Setting up gateway monitors...done.
Configuring firewall.......done.
Starting PFLOG...done.
Starting NTP service...deferred.
Generating RRD graphs...done.
Configuring system logging...done.
>>> Invoking start script 'newwanip'
Reconfiguring IPv4 on mvneta0.10: OK
>>> Invoking start script 'freebsd'
>>> Invoking start script 'carp'
>>> Invoking start script 'cron'
Starting Cron: OK
>>> Invoking start script 'beep'
Root file system: /dev/ufs/OPNsense
Thu Dec 26 02:52:53 UTC 2019

*** espress0binv4.local.lan: OPNsense 20.1.b_16 (aarch64/OpenSSL) ***

 LAN (mvneta0.20) -> v4:[_IP_XXXXXXX]/24
 WAN (mvneta0.10) -> v4/DHCP4:[_IP_XXXXXXXX]/24

 HTTPS: SHA256 5C 1F 23 1F 89 E2 5F 71 35 97 26 DD 50 AF 80 5D
               0E 56 03 3F 32 F0 E9 6D 12 F6 29 25 42 73 90 92
 SSH:   SHA256 1ikGPPHoddVFr1SiE/CD2ZXqdB21y3ZO/TjTQTOnL14 (ECDSA)
 SSH:   SHA256 3OGrgFRd2Maj59KtYOFc7KiVzd4KH99N623sJE0w8iw (ED25519)
 SSH:   SHA256 hDo6Us8XRjRLdtOfYg/h0JqUOMZpclK/cScvx2dBd3Q (RSA)

*** espress0binv4.local.lan: OPNsense 20.1.b_16 (aarch64/OpenSSL) ***

 LAN (mvneta0.20) -> v4:[_IP_XXXXXXX]/24
 WAN (mvneta0.10) -> v4/DHCP4:[_IP_XXXXXXXX]/24

 HTTPS: SHA256 5C 1F 23 1F 89 E2 5F 71 35 97 26 DD 50 AF 80 5D
               0E 56 03 3F 32 F0 E9 6D 12 F6 29 25 42 73 90 92
 SSH:   SHA256 1ikGPPHoddVFr1SiE/CD2ZXqdB21y3ZO/TjTQTOnL14 (ECDSA)
 SSH:   SHA256 3OGrgFRd2Maj59KtYOFc7KiVzd4KH99N623sJE0w8iw (ED25519)
 SSH:   SHA256 hDo6Us8XRjRLdtOfYg/h0JqUOMZpclK/cScvx2dBd3Q (RSA)

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 8

root@espress0binv4:~ # ifconfig
mvneta0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0 prefixlen 64 scopeid 0x1
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
	inet[_IP_XXXX] netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
	syncpeer:[_IP_XX] maxupd: 128 defer: off
	groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
mvneta0.10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=3<RXCSUM,TXCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0.10 prefixlen 64 scopeid 0xa
	inet[_IP_XXXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXXX]
	groups: vlan
	vlan: 10 vlanpcp: 0 parent interface: mvneta0
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mvneta0.20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=3<RXCSUM,TXCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0.20 prefixlen 64 scopeid 0xb
	inet[_IP_XXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXX]
	groups: vlan
	vlan: 20 vlanpcp: 0 parent interface: mvneta0
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@espress0binv4:~ # gpart show
=>     63  7673793  mmcsd0  MBR  (3.7G)
       63     3009          - free -  (1.5M)
     3072   110592       1  fat32lba  [active]  (54M)
   113664  7554048       2  freebsd  (3.6G)
  7667712     6144          - free -  (3.0M)

root@espress0binv4:~ # ping www.yahoo.com
PING atsv2-fp-shed.wg1.b.yahoo.com (98.137.246.7): 56 data bytes
64 bytes from[_IP_XXXXXXX]: icmp_seq=0 ttl=48 time=254.778 ms
^C
--- atsv2-fp-shed.wg1.b.yahoo.com ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 254.778/254.778/254.778/0.000 ms
root@espress0binv4:~ #
root@espress0binv4:~ # exit

*** espress0binv4.local.lan: OPNsense 20.1.b_16 (aarch64/OpenSSL) ***

 LAN (mvneta0.20) -> v4:[_IP_XXXXXXX]/24
 WAN (mvneta0.10) -> v4/DHCP4:[_IP_XXXXXXXX]/24

 HTTPS: SHA256 5C 1F 23 1F 89 E2 5F 71 35 97 26 DD 50 AF 80 5D
               0E 56 03 3F 32 F0 E9 6D 12 F6 29 25 42 73 90 92
 SSH:   SHA256 1ikGPPHoddVFr1SiE/CD2ZXqdB21y3ZO/TjTQTOnL14 (ECDSA)
 SSH:   SHA256 3OGrgFRd2Maj59KtYOFc7KiVzd4KH99N623sJE0w8iw (ED25519)
 SSH:   SHA256 hDo6Us8XRjRLdtOfYg/h0JqUOMZpclK/cScvx2dBd3Q (RSA)

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 8

root@espress0binv4:~ # ifconfig
mvneta0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0 prefixlen 64 scopeid 0x1
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
	inet[_IP_XXXX] netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
	syncpeer:[_IP_XX] maxupd: 128 defer: off
	groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
mvneta0.10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=3<RXCSUM,TXCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0.10 prefixlen 64 scopeid 0xa
	inet[_IP_XXXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXXX]
	groups: vlan
	vlan: 10 vlanpcp: 0 parent interface: mvneta0
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mvneta0.20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=3<RXCSUM,TXCSUM>
	ether [_MAC_XXXXXXXXXX]
	inet6 fe80::5e89:7eff:fe04:6a00%mvneta0.20 prefixlen 64 scopeid 0xb
	inet[_IP_XXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXX]
	groups: vlan
	vlan: 20 vlanpcp: 0 parent interface: mvneta0
	media: Ethernet 1000baseT <full-duplex>
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@espress0binv4:~ # etherswitchcfg -v
etherswitch0: Marvell 6000 series switch with 6 ports and 128 VLAN groups
etherswitch0: VLAN capabilities=6<PORT,DOT1Q>
etherswitch0: VLAN mode: DOT1Q
port0:
	pvid: 1
	flags=1<CPUPORT>
	media: Ethernet 1000baseT <full-duplex>
	status: active
port1:
	pvid: 10
	flags=0<>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
port2:
	pvid: 20
	flags=0<>
	media: Ethernet autoselect (none)
	status: no carrier
port3:
	pvid: 1
	flags=0<>
	media: Ethernet autoselect (none)
	status: no carrier
port4:
	pvid: 0
	flags=0<>
	media: <unknown type>
	status: no carrier
port5:
	pvid: 0
	flags=0<>
	media: <unknown type>
	status: no carrier
vlangroup0:
	vlan: 1
	members 0,1,2,3
vlangroup1:
	vlan: 10
	members 0t,1
vlangroup2:
	vlan: 20
	members 0t,2,3
root@espress0binv4:~ # uname -an
FreeBSD espress0binv4.local.lan 13.0-CURRENT FreeBSD 13.0-CURRENT #47 r356074M: Wed Dec 25 18:52:41 +08 2019     [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC  arm64
root@espress0binv4:~ #