Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-12-31 15:11:20
From: nullnilaki
Description: NetBSD/sgimips(GENERIC64_IP3x) 9.99.31 on silicon graphics O2 plus
> bootp()ip30boot
Obtaining ip30boot from server macbook2006
8123408+188240 entry: 0xffffffffa0069000
[   1.0000000] phys segment: 0x5c000 @ 0x4000
[   1.0000000] adding 0x5c000 @ 0x4000 to freelist 0
[   1.0000000] phys segment: 0x7ec000 @ 0x60000
[   1.0000000] adding 0x4000 @ 0x60000 to freelist 0
[   1.0000000] skipping 0x7e8000 @ 0x64000 (kernel)
[   1.0000000] phys segment: 0x500000 @ 0x850000
[   1.0000000] adding 0x500000 @ 0x850000 to freelist 0
[   1.0000000] phys segment: 0xec00000 @ 0x1400000
[   1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.31 (GENERIC64_IP3x) #6: Tue Dec 31 15:05:20 UTC 2019
[   1.0000000] 	naruaki@:/usr/obj.sgimips64/sys/arch/sgimips/compile/GENERIC64_IP3x
[   1.0000000] total memory = 255 MB
[   1.0000000] (6848 KB reserved for ARCS)
[   1.0000000] avail memory = 239 MB
[   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 5], 1 processor
[   1.0000000] cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
[   1.0000000] cpu0: 48 TLB entries, 1TB (40-bit) VAs, 64GB (36-bit) PAs, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 1024KB/32B direct-mapped write-through L2 unified cache
[   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
[   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
[   1.0000000] crmfb0: device unusable if not setup by firmware
[   1.0000000] mace0 at mainbus0 addr 0x1f000000
[   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
[   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
[   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
[   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
[   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
[   1.0000000] mec0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1
[   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
[   1.0000000] audio0 at mavb0: playback
[   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 40ms for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
[   1.0000000] pci0 at macepci0 bus 0
[   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc0: interrupting at crime interrupt 8
[   1.0000000] ahc0: Using left over BIOS settings
[   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc1: interrupting at crime interrupt 9
[   1.0000000] ahc1: Using left over BIOS settings
[   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[   1.0099696] scsibus0: waiting 2 seconds for devices to settle...
[   1.0860757] scsibus1: waiting 2 seconds for devices to settle...
[   3.9383406] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1F09> cdrom removable
[   4.0419637] cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[  10.9588851] WARNING: 1 error while detecting hardware; check system log.
[  11.0455541] boot device: mec0
[  11.0811551] root on mec0
[  11.1155018] nfs_boot: trying DHCP/BOOTP
[  14.2214672] nfs_boot: BOOTP next-server:[_IP_XXXXXXX]
[  14.2888977] nfs_boot: my_name=iris
[  14.3297430] nfs_boot: my_addr=192.168.1.33
[  14.3789629] nfs_boot: my_mask=255.255.255.0
[  14.4292337] nfs_boot: gateway=0.0.0.0
[  32.4832160] nfs_boot: timeout...
[  37.5200960] nfs_boot: timeout...