Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-01-01 13:48:25
From: ad
Description: PC Engines APU1
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.32 (GENERIC) #0: Wed Jan 1 13:37:15 UTC 2020 [ 1.0000000] [_EMAIL_XXX]:/home/ad/src/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 2016 MB [ 1.0000000] avail memory = 1934 MB [ 1.0000000] pool redzone disabled for 'buf4k' [ 1.0000000] pool redzone disabled for 'buf64k' [ 1.0000000] rnd: seeded with 256 bits [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] Kernelized RAIDframe activated [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000000] [235] acpicpu* disabled [ 1.0000000] RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> [ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.0000030] PC Engines APU (1.0) [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F2B20 000014 (v00 CORE ) [ 1.0000030] ACPI: RSDT 0x000000007E162424 000044 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: FACP 0x000000007E164838 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: DSDT 0x000000007E1624C8 00232B (v02 PCENG COREBOOT 00010001 INTL 20121114) [ 1.0000030] ACPI: FACS 0x000000007E1647F8 000040 [ 1.0000030] ACPI: SPCR 0x000000007E16492C 000050 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: HPET 0x000000007E164980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: APIC 0x000000007E1649B8 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: HEST 0x000000007E164A18 000198 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 1.0000030] ACPI: SSDT 0x000000007E164BB0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 1.0000030] ACPI: SSDT 0x000000007E166240 00030C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 1.0000030] ACPI: SSDT 0x000000007E166550 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 1.0000030] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: AMD G-T40E Processor, id 0x500f20 [ 1.0000030] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000030] cpu1 at mainbus0 apid 1 [ 1.0000030] cpu1: AMD G-T40E Processor, id 0x500f20 [ 1.0000030] cpu1: node 0, package 0, core 1, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20191213 [ 1.0000030] acpi0: X/RSDT: OemId <CORE ,COREBOOT,00000000>, AslId <CORE,00000000> [ 1.0000030] mpacpi: PCI bus 4 int routing already done! [ 1.0000030] acpi0: SCI interrupting at int 9 [ 1.0000030] acpi0: fixed power button present [ 1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.0423729] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0423729] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.0499923] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 [ 1.0499923] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.0499923] spkr0 at pcppi1: PC Speaker [ 1.0499923] wsbell at spkr0 not configured [ 1.0499923] midi0 at pcppi1: PC speaker [ 1.0499923] sysbeep0 at pcppi1 [ 1.0499923] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button [ 1.0499923] ACPI: Enabled 16 GPEs in block 00 to 1F [ 1.0499923] attimer1: attached to pcppi1 [ 1.0499923] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0499923] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.0499923] pchb0 at pci0 dev 0 function 0: AMD Family14h Root Complex (rev. 0x00) [ 1.0499923] ppb0 at pci0 dev 4 function 0: AMD Family14h PCIe (rev. 0x00) [ 1.0499923] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0499923] ppb0: link is x1 @ 2.5GT/s [ 1.0499923] pci1 at ppb0 bus 1 [ 1.0499923] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0499923] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06) [ 1.0499923] re0: interrupting at msix0 vec 0 [ 1.0499923] re0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0499923] re0: using 256 tx descriptors [ 1.0499923] rgephy0 at re0 phy 7: RTL8211D 1000BASE-T media interface [ 1.0499923] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0499923] ppb1 at pci0 dev 5 function 0: AMD Family14h PCIe (rev. 0x00) [ 1.0499923] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0499923] ppb1: link is x1 @ 2.5GT/s [ 1.0499923] pci2 at ppb1 bus 2 [ 1.0499923] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0499923] re1 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06) [ 1.0499923] re1: interrupting at msix1 vec 0 [ 1.0499923] re1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0499923] re1: using 256 tx descriptors [ 1.0499923] rgephy1 at re1 phy 7: RTL8211D 1000BASE-T media interface [ 1.0499923] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0499923] ppb2 at pci0 dev 6 function 0: AMD Family14h PCIe (rev. 0x00) [ 1.0499923] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0499923] ppb2: link is x1 @ 2.5GT/s [ 1.0499923] pci3 at ppb2 bus 3 [ 1.0499923] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0499923] re2 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06) [ 1.0499923] re2: interrupting at msix2 vec 0 [ 1.0499923] re2: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0499923] re2: using 256 tx descriptors [ 1.0499923] rgephy2 at re2 phy 7: RTL8211D 1000BASE-T media interface [ 1.0499923] rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0499923] ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700-SB900 SATA Controller (AHCI mode) (rev. 0x40) [ 1.0499923] ahcisata0: 64-bit DMA [ 1.0499923] ahcisata0: ignoring broken port multiplier support [ 1.0499923] ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xf330ff05<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SMPS,SSNTF,SNCQ,S64A> [ 1.0499923] ahcisata0: interrupting at ioapic0 pin 19 [ 1.0499923] atabus0 at ahcisata0 channel 0 [ 1.0499923] atabus1 at ahcisata0 channel 1 [ 1.0499923] atabus2 at ahcisata0 channel 2 [ 1.0499923] atabus3 at ahcisata0 channel 3 [ 1.0499923] atabus4 at ahcisata0 channel 4 [ 1.0499923] atabus5 at ahcisata0 channel 5 [ 1.0499923] ohci0 at pci0 dev 18 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.0499923] ohci0: interrupting at ioapic0 pin 18 [ 1.0499923] ohci0: OHCI version 1.0, legacy support [ 1.0499923] usb0 at ohci0: USB revision 1.0 [ 1.0499923] ehci0 at pci0 dev 18 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.0499923] ehci0: interrupting at ioapic0 pin 17 [ 1.0499923] ehci0: dropped intr workaround enabled [ 1.0499923] ehci0: EHCI version 1.0 [ 1.0499923] ehci0: 1 companion controller, 5 ports: ohci0 [ 1.0499923] usb1 at ehci0: USB revision 2.0 [ 1.0499923] ohci1 at pci0 dev 19 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.0499923] ohci1: interrupting at ioapic0 pin 18 [ 1.0499923] ohci1: OHCI version 1.0, legacy support [ 1.0499923] usb2 at ohci1: USB revision 1.0 [ 1.0499923] ehci1 at pci0 dev 19 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.0499923] ehci1: interrupting at ioapic0 pin 17 [ 1.0499923] ehci1: dropped intr workaround enabled [ 1.0499923] ehci1: EHCI version 1.0 [ 1.0499923] ehci1: 1 companion controller, 5 ports: ohci1 [ 1.0499923] usb3 at ehci1: USB revision 2.0 [ 1.0499923] piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x42) [ 1.0499923] piixpm0: interrupting at SMI, [ 1.0499923] iic0 at piixpm0 port 0: I2C bus [ 1.0499923] iic1 at piixpm0 port 1: I2C bus [ 1.0499923] iic2 at piixpm0 port 2: I2C bus [ 1.0499923] iic3 at piixpm0 port 3: I2C bus [ 1.0499923] pcib0 at pci0 dev 20 function 3: ATI Technologies SB700-SB900 LPC Host Controller (rev. 0x40) [ 1.0499923] ppb3 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x40) [ 1.0499923] pci4 at ppb3 bus 4 [ 1.0499923] pci4: i/o space, memory space enabled [ 1.0499923] ohci2 at pci0 dev 20 function 5: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.0499923] ohci2: interrupting at ioapic0 pin 18 [ 1.0499923] ohci2: OHCI version 1.0, legacy support [ 1.0499923] usb4 at ohci2: USB revision 1.0 [ 1.0499923] ppb4 at pci0 dev 21 function 0: ATI Technologies SB700-SB900 PCI to PCI bridge (PCIe 0) (rev. 0x00) [ 1.0499923] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [ 1.0499923] ppb4: link is x1 @ 2.5GT/s [ 1.0499923] pci5 at ppb4 bus 5 [ 1.0499923] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0499923] athn0 at pci5 dev 0 function 0: Atheros AR9280 [ 1.0499923] athn0: rev 2 (2T2R), ROM rev 22, address [_MAC_XXXXXXXXXX] [ 1.0499923] athn0: interrupting at ioapic0 pin 16 [ 1.0499923] ohci3 at pci0 dev 22 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00) [ 1.0499923] ohci3: interrupting at ioapic0 pin 18 [ 1.0499923] ohci3: OHCI version 1.0, legacy support [ 1.0499923] usb5 at ohci3: USB revision 1.0 [ 1.0499923] ehci2 at pci0 dev 22 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00) [ 1.0499923] ehci2: interrupting at ioapic0 pin 17 [ 1.0499923] ehci2: dropped intr workaround enabled [ 1.0499923] ehci2: EHCI version 1.0 [ 1.0499923] ehci2: 1 companion controller, 4 ports: ohci3 [ 1.0499923] usb6 at ehci2: USB revision 2.0 [ 1.0499923] pchb1 at pci0 dev 24 function 0: AMD Family12h/14h HyperTransport Configuration (rev. 0x43) [ 1.0499923] pchb2 at pci0 dev 24 function 1: AMD Family12h/14h Address Map Configuration (rev. 0x00) [ 1.0499923] pchb3 at pci0 dev 24 function 2: AMD Family12h/14h DRAM Configuration (rev. 0x00) [ 1.0499923] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration [ 1.0499923] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family14h) [ 1.0499923] pchb4 at pci0 dev 24 function 4: AMD Family12h/14h CPU C-state Configuration (rev. 0x00) [ 1.0499923] pchb5 at pci0 dev 24 function 5: AMD Family12h/14h Host Bridge (rev. 0x00) [ 1.0499923] pchb6 at pci0 dev 24 function 6: AMD Family12h/14h Misc. Configuration (rev. 0x00) [ 1.0499923] pchb7 at pci0 dev 24 function 7: AMD Family12h/14h Host Bridge (rev. 0x00) [ 1.0499923] isa0 at pcib0 [ 1.0499923] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0499923] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0499923] com0: console [ 1.0499923] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo [ 1.0499923] nct0 at isa0 port 0x2e-0x2f: Nuvoton NCT5104D GPIO [ 1.0499923] nct0: enabled pins: GPIO0(ff) GPIO1(ff) GPIO67(1) [ 1.0499923] gpio0 at nct0: 17 pins [ 1.0499923] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.6671335] timecounter: Timecounter "TSC" frequency 1000511930 Hz quality 3000 [ 1.6772081] IPsec: Initialized Security Association Processing. [ 1.6872076] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.6872076] uhub0: 5 ports with 5 removable, self powered [ 1.6872076] uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.6988503] uhub1: 5 ports with 5 removable, self powered [ 1.6988503] uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.7072758] uhub2: 5 ports with 5 removable, self powered [ 1.7072758] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.7224706] uhub3: 5 ports with 5 removable, self powered [ 1.7224706] uhub4 at usb4: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.7273468] uhub4: 2 ports with 2 removable, self powered [ 1.7273468] uhub5 at usb5: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.7398729] uhub5: 4 ports with 4 removable, self powered [ 1.7398729] uhub6 at usb6: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.7485518] uhub6: 4 ports with 4 removable, self powered [ 1.7877041] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 3.3231619] wd0 at atabus0 drive 0 [ 3.3231619] wd0: <SATA SSD> [ 3.3231619] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.3231619] wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors [ 3.3330957] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.3330957] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 4.0055877] umass0 at uhub6 port 1 configuration 1 interface 0 [ 4.0160215] umass0: Generic (0x58f) Flash Card Reader/Writer (0x6366), rev 2.01/1.00, addr 2 [ 4.0270195] umass0: using SCSI over Bulk-Only [ 4.0270195] scsibus0 at umass0: 2 targets, 1 lun per target [ 4.0355595] sd0 at scsibus0 target 0 lun 0: <Multiple, Card Reader, 1.00> disk removable [ 4.4873030] sd0: fabricating a geometry [ 4.4996253] sd0: 7519 MB, 7519 cyl, 64 head, 32 sec, 512 bytes/sect x 15398912 sectors [ 4.5073312] sd0: fabricating a geometry [ 4.5473749] boot device: wd0 [ 4.5473749] root on wd0a dumps on wd0b [ 4.5589178] root file system type: ffs [ 4.5589178] kern.module.path=/stand/amd64/9.99.32/modules [ 8.1810356] cprng 598 59 7: creating with partial entropy