Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-01-03 22:05:14
From: nullnilaki
Description: NetBSD/sgimips(GENERIC64_IP3x) 9.99.31 on silicon graphics O2 R12K
> bootp()ip32boot
Obtaining ip32boot from server macbook2006
8111440  -ec0: rx error: length=558 flags=<crc>
-ec0: rx error: length=558 flags=<symbol,crc>
+187664 entry: 0xffffffffa0069000
[   1.0000000] phys segment: 0x5c000 @ 0x4000
[   1.0000000] adding 0x5c000 @ 0x4000 to freelist 0
[   1.0000000] phys segment: 0x7e8000 @ 0x60000
[   1.0000000] adding 0x4000 @ 0x60000 to freelist 0
[   1.0000000] skipping 0x7e4000 @ 0x64000 (kernel)
[   1.0000000] phys segment: 0x504000 @ 0x84c000
[   1.0000000] adding 0x504000 @ 0x84c000 to freelist 0
[   1.0000000] phys segment: 0xec00000 @ 0x1400000
[   1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.31 (GENERIC64_IP3x) #0: Fri Jan  3 21:28:47 UTC 2020
[   1.0000000] 	naruaki@:/usr/obj.sgimips64/sys/arch/sgimips/compile/GENERIC64_IP3x
[   1.0000000] total memory = 255 MB
[   1.0000000] (6848 KB reserved for ARCS)
[   1.0000000] avail memory = 239 MB
[   1.0000000] mainbus0 (root): SGI-IP32 [SGI, b], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R12000 CPU (0xe23) Rev. 2.3 with unknown FPC type (0x900) Rev. 0.0
[   1.0000000] cpu0: 64 TLB entries, 16TB (44-bit) VAs, 1TB (40-bit) PAs, 16MB max page size
[   1.0000000] cpu0: 32KB/64B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 1024KB/64B 2-way set-associative write-back L2 data cache
[   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.4 (CRIME_ID: 17592186044577)
[   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
[   1.0000000] crmfb0: device unusable if not setup by firmware
[   1.0000000] mace0 at mainbus0 addr 0x1f000000
[   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
[   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
[   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
[   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
[   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
[   1.0000000] mec0: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000000] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1
[   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: can't power up conversion resources
[   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
[   1.0000000] pci0 at macepci0 bus 0
[   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc0: interrupting at crime interrupt 8
[   1.0000000] ahc0: Using left over BIOS settings
[   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc1: interrupting at crime interrupt 9
[   1.0000000] ahc1: Using left over BIOS settings
[   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[   1.0199627] scsibus0: waiting 2 seconds for devices to settle...
[   1.0917969] scsibus1: waiting 2 seconds for devices to settle...
[   3.9340627] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-6401TA, 1015> cdrom removable
[   4.0422985] cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[  10.9540021] WARNING: 1 error while detecting hardware; check system log.
[  11.0351667] boot device: mec0
[  11.0707654] root on mec0
[  11.1073467] nfs_boot: trying DHCP/BOOTP
[  14.2132779] nfs_boot: BOOTP next-server: xxx.xxx.xxx.xxx
[  14.2819348] nfs_boot: my_name=iris
[  14.3227712] nfs_boot: my_addr=xxx.xxx.xxx.xxx
[  14.3719992] nfs_boot: my_mask=xxx.xxx.xxx.xxx
[  14.4222688] nfs_boot: gateway=xxx.xxx.xxx.xxx
[  32.4662554] nfs_boot: timeout...
[