Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-01-04 10:16:10
From: nullnilaki
Description: NetBSD/sgimips(GENERIC64_IP2x) 9.99.31 on silicon graphics Indy R5K
>> scsi(0)disk(2)rdisk(0)partition(8)boot scsi(0)disk(2)rdisk(0)partition(0)/netbsd

NetBSD/sgimips 8.1 Bootstrap, Revision 1.5 (Fri May 31 08:43:59 UTC 2019)

devopen: scsi(0)disk(2)rdisk(0)partition(0) type scsi file /netbsd
5096176+173328 [443232+290760]=0x5ba458
[   1.0000000] phys segment: 0xe000 @ 0x8002000
[   1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[   1.0000000] phys segment: 0x730000 @ 0x8010000
[   1.0000000] adding 0x56000 @ 0x8010000 to freelist 0
[   1.0000000] adding 0x1d8000 @ 0x8568000 to freelist 0
[   1.0000000] phys segment: 0xb800000 @ 0x8800000
[   1.0000000] adding 0xb800000 @ 0x8800000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.31 (GENERIC64_IP2x) #3: Sat Jan  4 09:19:12 UTC 2020
[   1.0000000] 	naruaki@:/usr/obj.sgimips64/sys/arch/sgimips/compile/GENERIC64_IP2x
[   1.0000000] total memory = 191 MB
[   1.0000000] (768 KB reserved for ARCS)
[   1.0000000] avail memory = 183 MB
[   1.0000000] WARNING: module error: built-in module sequencer can't find builtin dependency `midi'
[   1.0000000] WARNING: module error: built-in module sequencer prerequisite midi failed, error 2
[   1.0000000] mainbus0 (root): SGI-IP22 [SGI, 690a5ae7], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
[   1.0000000] cpu0: 48 TLB entries, 1TB (40-bit) VAs, 64GB (36-bit) PAs, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 data cache
[   1.0000000] int0 at mainbus0 addr 0x1fbd9880
[   1.0000000] int0: bus 90MHz, CPU 180MHz
[   1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
[   1.0000000] gio0 at imc0
[   1.0000000] newport0 at gio0: SGI NG1 (board revision 2, cmap revision 5, xmap revision 5, vc2 revision 0), depth 8
[   1.0000000] wsdisplay0 at newport0 kbdmux 1
[   1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
[   1.0000000] zsc0 at hpc0 offset 0x59830
[   1.0000000] zstty0 at zsc0 channel 1 (console i/o)
[   1.0000000] zstty1 at zsc0 channel 0
[   1.0000000] pckbc0 at hpc0 offset 0x59840
[   1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
[   1.0000000] sq0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
[   1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
[   1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
[   1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
[   1.0000000] audio0 at haltwo0: playback
[   1.0000000] audio0: slinear_be:16 2ch 48000Hz, blk 42ms for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] pi1ppc0 at hpc0 offset 0x59800
[   1.0000000] pi1ppc0: capabilities=0x8<PS2>
[   1.0000000] ppbus0 at pi1ppc0
[   1.0000000] ppbus0: No IEEE1284 device found.
[   1.0000000] lpt0 at ppbus0: port mode = 0x1<COMPATIBLE>
[   1.0000000] button0 at hpc0 offset 0x59850
[   1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
[   1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guinness), board rev 0
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   1.2197566] WARNING: module error: built-in module sequencer can't find builtin dependency `midi'
[   1.3245582] WARNING: module error: built-in module sequencer prerequisite midi failed, error 2
[   3.4980994] sd0 at scsibus0 target 2 lun 0: <ATA, TS1GCF133, 2011> disk fixed
[   3.5846138] sd0: 955 MB, 1942 cyl, 16 head, 63 sec, 512 bytes/sect x 1957536 sectors
[   3.6777946] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers, tagged queueing
[   5.0391292] boot device: sd0
[   5.0759651] root on sd0a dumps on sd0b
[   5.1372362] root file system type: ffs
[   5.1839918] kern.module.path=/stand/sgimips/9.99.31/modules
[   5.2609164] exec /sbin/init: error 2
[   5.3015457] init: trying /sbin/oinit
[   5.3443804] exec /sbin/oinit: error 2
[   5.3883112] init: trying /sbin/init.bak
[   5.4343124] exec /sbin/init.bak: error 2
[   5.4813885] init: trying /rescue/init
[   5.5252946] exec /rescue/init: error 2
[   5.5702827] init path (default /sbin/init):