Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-01-07 15:05:46
From: Vitek_z
Description: NetBSD 8.1. ASUS A68HM-PLUS with AMD A6-7480 Radeon R5
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 15812 MB
avail memory = 15328 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa be30ef18
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000BD0BD000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD0BD088 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BD0C4238 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-693)
ACPI: DSDT 0x00000000BD0BD1A0 007098 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000BD75B080 000040
ACPI: APIC 0x00000000BD0C4348 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BD0C43C8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000BD0C4410 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD0C4450 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000BD0CEED8 001519 (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
ACPI: UEFI 0x00000000BD0C44E0 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: BGRT 0x00000000BD0C4528 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000BD0C4560 0006B2 (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x00000000BD0C4C18 008877 (v02 AMD    BANTRY   00000002 MSFT 04000000)
ACPI: CRAT 0x00000000BD0CD490 000360 (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x00000000BD0CD7F0 0016E4 (v01 AMD    CPMCMN   00000001 INTL 20051117)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec01000, version 0x21, 32 pins
cpu0 at mainbus0 apid 16
cpu0: AMD A6-7480 Radeon R5, 8 Compute Cores 2C+6G   , id 0x660f01
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 17
cpu1: AMD A6-7480 Radeon R5, 8 Compute Cores 2C+6G   , id 0x660f01
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
AMDN (PNP0C01) at acpi0 not configured
BROD (PNP0C02) at acpi0 not configured
UMEM (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpivga0: connected output devices:
acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
acpivga0:   0x0110: LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
SIO1 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
NBRM (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
UAR1 (PNP0501) at acpi0 not configured
S900 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
AWR1 (PNP0C02) at acpi0 not configured
ABR5 (PNP0C02) at acpi0 not configured
ABR6 (PNP0C02) at acpi0 not configured
ABR7 (PNP0C02) at acpi0 not configured
ABR8 (PNP0C02) at acpi0 not configured
ABR9 (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1576 (rev. 0x00)
genfb0 at pci0 dev 1 function 0: vendor 1002 product 9874 (rev. 0xe6)
genfb0: framebuffer at 0xe0000000, size 800x600, depth 32, stride 3328
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
pchb1 at pci0 dev 2 function 0: vendor 1022 product 157b (rev. 0x00)
pchb2 at pci0 dev 3 function 0: vendor 1022 product 157b (rev. 0x00)
vendor 1022 product 1578 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
pchb3 at pci0 dev 9 function 0: vendor 1022 product 157d (rev. 0x00)
xhci0 at pci0 dev 16 function 0: vendor 1022 product 7814 (rev. 0x09)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7801 (rev. 0x40)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xf7329f05<PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 1022 product 7807 (rev. 0x11)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb2 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1022 product 7808 (rev. 0x11)
ehci0: interrupting at ioapic0 pin 17
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 5 ports: ohci0
usb3 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1022 product 7807 (rev. 0x11)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb4 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1022 product 7808 (rev. 0x11)
ehci1: interrupting at ioapic0 pin 17
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 5 ports: ohci1
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1022 product 780b (rev. 0x16)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 10ec product 0887
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg1: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
pcib0 at pci0 dev 20 function 3: vendor 1022 product 780e (rev. 0x11)
ppb0 at pci0 dev 20 function 4: vendor 1022 product 780f (rev. 0x40)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cmpci0 at pci1 dev 5 function 0: vendor 13f6 product 0111 (rev. 0x10)
cmpci0: interrupting at ioapic0 pin 20
audio1 at cmpci0: full duplex, playback, capture, mmap, independent
cmpci0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
cmpci0: Latency: 256 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
opl at cmpci0 not configured
mpu0 at cmpci0
midi1 at mpu0: CMPCI MPU-401 MIDI UART
ppb1 at pci0 dev 21 function 0: vendor 1022 product 43a0 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 21 function 1: vendor 1022 product 43a1 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
xhci1 at pci3 dev 0 function 0: vendor 1b21 product 1142 (rev. 0x00)
xhci1: interrupting at msi2 vec 0
xhci1: xHCI version 1.0
usb6 at xhci1: USB revision 3.0
usb7 at xhci1: USB revision 2.0
ppb3 at pci0 dev 21 function 2: vendor 1022 product 43a2 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x11)
re0: interrupting at msi3 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
pchb4 at pci0 dev 24 function 0: vendor 1022 product 1570 (rev. 0x00)
pchb5 at pci0 dev 24 function 1: vendor 1022 product 1571 (rev. 0x00)
pchb6 at pci0 dev 24 function 2: vendor 1022 product 1572 (rev. 0x00)
pchb7 at pci0 dev 24 function 3: vendor 1022 product 1573 (rev. 0x00)
pchb8 at pci0 dev 24 function 4: vendor 1022 product 1574 (rev. 0x00)
pchb9 at pci0 dev 24 function 5: vendor 1022 product 1575 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 400 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 21967 mW, 3500 MHz
acpicpu0: P1: FFH, lat   4 us, pow 16042 mW, 3200 MHz
acpicpu0: P2: FFH, lat   4 us, pow 12650 mW, 2900 MHz
acpicpu0: P3: FFH, lat   4 us, pow  8917 mW, 2400 MHz
acpicpu0: P4: FFH, lat   4 us, pow  5827 mW, 1900 MHz
acpicpu0: P5: FFH, lat   4 us, pow  3517 mW, 1400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3491374900 Hz quality 3000
uhub0 at usb0: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 1022 (0x1022) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb6: vendor 1b21 (0x1b21) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb7: vendor 1b21 (0x1b21) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub4 at usb2: vendor 1022 (0x1022) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
uhub5 at usb3: vendor 1022 (0x1022) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 5 ports with 5 removable, self powered
uhub6 at usb4: vendor 1022 (0x1022) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 5 ports with 5 removable, self powered
uhub7 at usb5: vendor 1022 (0x1022) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 5 ports with 5 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD5000AAKS-00A7B2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: GPT GUID: 5e4941d1-f87f-4329-9ece-66a780da0ebc
dk0 at wd0: "EFI system", 262144 blocks at 4096, type: msdos
dk1 at wd0: "NetBSD", 956301312 blocks at 266240, type: ffs
dk2 at wd0: "swap", 20205568 blocks at 956567552, type: swap
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr3 at audio2: PC Speaker (synthesized)
boot device: wd0
root on dk1 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/8.1/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)