Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-01-15 11:49:02
From: abs
Description: Dell PowerEdge T320
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0_RC1 (GENERIC) #0: Thu Jan 9 17:18:43 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 32722 MB
avail memory = 31749 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. PowerEdge T320
mainbus0 (root)
ACPI: RSDP 0x00000000000F10D0 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1218 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x00000000CD33534C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x00000000CD31C000 0072F1 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 0x00000000CD337000 000040
ACPI: APIC 0x00000000CD334478 0001DE (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x00000000CD334664 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x00000000CD3346B8 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 0x00000000CD3346F4 0000E0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x00000000CD334A10 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WDAT 0x00000000CD334A50 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x00000000CD334B88 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x00000000CD3234B4 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x00000000CD323724 00055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x00000000CD3232F4 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x00000000CD323324 000190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x00000000CD3352E4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 0x00000000CD335274 00006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x00000000CD334DB0 0004C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x00000000CD338000 0040F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec3f000, version 0x20, 24 pins
x2APIC available but disabled by DMAR table
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 8
cpu4: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu4: package 0, core 4, smt 0
cpu5 at mainbus0 apid 10
cpu5: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu5: package 0, core 5, smt 0
cpu6 at mainbus0 apid 12
cpu6: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu6: package 0, core 6, smt 0
cpu7 at mainbus0 apid 14
cpu7: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu7: package 0, core 7, smt 0
cpu8 at mainbus0 apid 1
cpu8: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu8: package 0, core 0, smt 1
cpu9 at mainbus0 apid 3
cpu9: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu9: package 0, core 1, smt 1
cpu10 at mainbus0 apid 5
cpu10: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu10: package 0, core 2, smt 1
cpu11 at mainbus0 apid 7
cpu11: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu11: package 0, core 3, smt 1
cpu12 at mainbus0 apid 9
cpu12: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu12: package 0, core 4, smt 1
cpu13 at mainbus0 apid 11
cpu13: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu13: package 0, core 5, smt 1
cpu14 at mainbus0 apid 13
cpu14: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu14: package 0, core 6, smt 1
cpu15 at mainbus0 apid 15
cpu15: Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz, id 0x206d7
cpu15: package 0, core 7, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <DELL ,PE_SC3 ,00000001>, AslId <DELL,00000001>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
WHEA (PNP0C33) at acpi0 not configured
PMI0 (ACPI000D) at acpi0 not configured
SPK (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
ipmi_acpi0 at acpi0 (NIPM, IPI0001-5): io 0xca8,0xcac irq 10
ipmi0 at ipmi_acpi0
PEHB (PNP0C02) at acpi0 not configured
PEHB (PNP0C02) at acpi0 not configured
PEHB (PNP0C02) at acpi0 not configured
VTD1 (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (SRIO, PNP0C14-SRIO): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ACPI: Enabled 3 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3c00 (rev. 0x07)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 3c02 (rev. 0x07)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
ppb0: link is x4 @ 5.0GT/s
pci1 at ppb0 bus 8
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mfii0 at pci1 dev 0 function 0: "PERC H710P Adapter", firmware 21.3.5-0002, 1024MB cache
mfii0: interrupting at ioapic1 pin 2
scsibus0 at mfii0: 64 targets, 8 luns per target
ppb1 at pci0 dev 1 function 1: vendor 8086 product 3c03 (rev. 0x07)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
pci2 at ppb1 bus 9
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: vendor 8086 product 3c08 (rev. 0x07)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
pci3 at ppb2 bus 10
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 8086 product 3c20 (miscellaneous system, revision 0x07) at pci0 dev 4 function 0 not configured
vendor 8086 product 3c21 (miscellaneous system, revision 0x07) at pci0 dev 4 function 1 not configured
vendor 8086 product 3c22 (miscellaneous system, revision 0x07) at pci0 dev 4 function 2 not configured
vendor 8086 product 3c23 (miscellaneous system, revision 0x07) at pci0 dev 4 function 3 not configured
vendor 8086 product 3c24 (miscellaneous system, revision 0x07) at pci0 dev 4 function 4 not configured
vendor 8086 product 3c25 (miscellaneous system, revision 0x07) at pci0 dev 4 function 5 not configured
vendor 8086 product 3c26 (miscellaneous system, revision 0x07) at pci0 dev 4 function 6 not configured
vendor 8086 product 3c27 (miscellaneous system, revision 0x07) at pci0 dev 4 function 7 not configured
vendor 8086 product 3c28 (miscellaneous system, revision 0x07) at pci0 dev 5 function 0 not configured
vendor 8086 product 3c2a (miscellaneous system, revision 0x07) at pci0 dev 5 function 2 not configured
ppb3 at pci0 dev 17 function 0: vendor 8086 product 1d3e (rev. 0x05)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 11
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 8086 product 1d3a (miscellaneous communications, revision 0x05) at pci0 dev 22 function 0 not configured
vendor 8086 product 1d3b (miscellaneous communications, revision 0x05) at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ppb4 at pci0 dev 28 function 0: vendor 8086 product 1d10 (rev. 0xb5)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci5 at ppb4 bus 12
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci5 dev 0 function 0: Broadcom BCM5719 Gigabit Ethernet
bge0: APE firmware NCSI[_IP_XXX]
bge0: interrupting at msix0 vec 0
bge0: HW config 002b1094, 00006014, 0012aa08, 00000000 00000000
bge0: ASIC unknown BCM5719 (0x5719001), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5719C 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci5 dev 0 function 1: Broadcom BCM5719 Gigabit Ethernet
bge1: APE firmware NCSI[_IP_XXX]
bge1: interrupting at msix1 vec 0
bge1: HW config 002b1094, 00006014, 0012aa08, 00000000 00000000
bge1: ASIC unknown BCM5719 (0x5719001), Ethernet address [_MAC_XXXXXXXXXX]
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 2: BCM5719C 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge2 at pci5 dev 0 function 2: Broadcom BCM5719 Gigabit Ethernet
bge2: APE firmware NCSI[_IP_XXX]
bge2: interrupting at msix2 vec 0
bge2: HW config 002b1094, 00006014, 0012aa08, 00000000 00000000
bge2: ASIC unknown BCM5719 (0x5719001), Ethernet address [_MAC_XXXXXXXXXX]
bge2: setting short Tx thresholds
brgphy2 at bge2 phy 3: BCM5719C 1000BASE-T media interface, rev. 0
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge3 at pci5 dev 0 function 3: Broadcom BCM5719 Gigabit Ethernet
bge3: APE firmware NCSI[_IP_XXX]
bge3: interrupting at msix3 vec 0
bge3: HW config 002b1094, 00006014, 0012aa08, 00000000 00000000
bge3: ASIC unknown BCM5719 (0x5719001), Ethernet address [_MAC_XXXXXXXXXX]
bge3: setting short Tx thresholds
brgphy3 at bge3 phy 4: BCM5719C 1000BASE-T media interface, rev. 0
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci0 dev 28 function 4: vendor 8086 product 1d18 (rev. 0xb5)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci6 at ppb5 bus 1
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
bge4 at pci6 dev 0 function 0: Broadcom BCM5720 Gigabit Ethernet
bge4: APE firmware NCSI[_IP_XXX]
bge4: interrupting at msix4 vec 0
bge4: HW config 002b1594, 00006014, 0000aa08, 00000000 00000000
bge4: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge4: setting short Tx thresholds
brgphy4 at bge4 phy 1: BCM5720C 1000BASE-T media interface, rev. 0
brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge5 at pci6 dev 0 function 1: Broadcom BCM5720 Gigabit Ethernet
bge5: APE firmware NCSI[_IP_XXX]
bge5: interrupting at msix5 vec 0
bge5: HW config 002b1594, 00006014, 0000aa08, 00000000 00000000
bge5: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge5: setting short Tx thresholds
brgphy5 at bge5 phy 2: BCM5720C 1000BASE-T media interface, rev. 0
brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci0 dev 28 function 6: vendor 8086 product 1d1c (rev. 0xb5)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci7 at ppb6 bus 2
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 28 function 7: vendor 8086 product 1d1e (rev. 0xb5)
ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb7: link is x1 @ 2.5GT/s
pci8 at ppb7 bus 3
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 0 function 0: vendor 1912 product 0013 (rev. 0x00)
ppb8: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci9 at ppb8 bus 4
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci9 dev 0 function 0: vendor 1912 product 0013 (rev. 0x00)
ppb9: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 2.5GT/s
pci10 at ppb9 bus 5
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci10 dev 0 function 0: vendor 1912 product 0012 (rev. 0x00)
ppb10: PCI Express capability version 2 <PCI-E to PCI/PCI-X Bridge>
pci11 at ppb10 bus 6
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci11 dev 0 function 0: vendor 102b product 0534 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb11 at pci9 dev 1 function 0: vendor 1912 product 0013 (rev. 0x00)
ppb11: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 2.5GT/s
pci12 at ppb11 bus 7
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1d26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 22
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb12 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xa5)
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1d41 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1d02 (rev. 0x05)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe720ff45<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi6 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x00fe1050 rev 0x47
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
autoconfiguration error: pckbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
pci14 at mainbus0 bus 63
pci14: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 8086 product 3c80 (miscellaneous system, revision 0x07) at pci14 dev 8 function 0 not configured
vendor 8086 product 3c90 (miscellaneous system, revision 0x07) at pci14 dev 9 function 0 not configured
vendor 8086 product 3cc0 (miscellaneous system, revision 0x07) at pci14 dev 10 function 0 not configured
vendor 8086 product 3cc1 (miscellaneous system, revision 0x07) at pci14 dev 10 function 1 not configured
vendor 8086 product 3cc2 (miscellaneous system, revision 0x07) at pci14 dev 10 function 2 not configured
vendor 8086 product 3cd0 (miscellaneous system, revision 0x07) at pci14 dev 10 function 3 not configured
vendor 8086 product 3ce0 (miscellaneous system, revision 0x07) at pci14 dev 11 function 0 not configured
vendor 8086 product 3ce3 (miscellaneous system, revision 0x07) at pci14 dev 11 function 3 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 12 function 0 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 12 function 1 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 12 function 2 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 12 function 3 not configured
vendor 8086 product 3cf4 (miscellaneous system, revision 0x07) at pci14 dev 12 function 6 not configured
vendor 8086 product 3cf6 (miscellaneous system, revision 0x07) at pci14 dev 12 function 7 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 13 function 0 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 13 function 1 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 13 function 2 not configured
vendor 8086 product 3ce8 (miscellaneous system, revision 0x07) at pci14 dev 13 function 3 not configured
vendor 8086 product 3cf5 (miscellaneous system, revision 0x07) at pci14 dev 13 function 6 not configured
vendor 8086 product 3ca0 (miscellaneous system, revision 0x07) at pci14 dev 14 function 0 not configured
vendor 8086 product 3c46 (performance counters DASP, revision 0x07) at pci14 dev 14 function 1 not configured
vendor 8086 product 3ca8 (miscellaneous system, revision 0x07) at pci14 dev 15 function 0 not configured
vendor 8086 product 3c71 (miscellaneous system, revision 0x07) at pci14 dev 15 function 1 not configured
vendor 8086 product 3caa (miscellaneous system, revision 0x07) at pci14 dev 15 function 2 not configured
vendor 8086 product 3cab (miscellaneous system, revision 0x07) at pci14 dev 15 function 3 not configured
vendor 8086 product 3cac (miscellaneous system, revision 0x07) at pci14 dev 15 function 4 not configured
vendor 8086 product 3cad (miscellaneous system, revision 0x07) at pci14 dev 15 function 5 not configured
vendor 8086 product 3cae (miscellaneous system, revision 0x07) at pci14 dev 15 function 6 not configured
vendor 8086 product 3cb0 (miscellaneous system, revision 0x07) at pci14 dev 16 function 0 not configured
vendor 8086 product 3cb1 (miscellaneous system, revision 0x07) at pci14 dev 16 function 1 not configured
vendor 8086 product 3cb2 (miscellaneous system, revision 0x07) at pci14 dev 16 function 2 not configured
vendor 8086 product 3cb3 (miscellaneous system, revision 0x07) at pci14 dev 16 function 3 not configured
vendor 8086 product 3cb5 (miscellaneous system, revision 0x07) at pci14 dev 16 function 5 not configured
vendor 8086 product 3cb6 (miscellaneous system, revision 0x07) at pci14 dev 16 function 6 not configured
vendor 8086 product 3cb7 (miscellaneous system, revision 0x07) at pci14 dev 16 function 7 not configured
vendor 8086 product 3cb8 (miscellaneous system, revision 0x07) at pci14 dev 17 function 0 not configured
vendor 8086 product 3ce4 (miscellaneous system, revision 0x07) at pci14 dev 19 function 0 not configured
vendor 8086 product 3c43 (performance counters DASP, revision 0x07) at pci14 dev 19 function 1 not configured
vendor 8086 product 3ce6 (performance counters DASP, revision 0x07) at pci14 dev 19 function 4 not configured
vendor 8086 product 3c44 (performance counters DASP, revision 0x07) at pci14 dev 19 function 5 not configured
vendor 8086 product 3c45 (miscellaneous system, revision 0x07) at pci14 dev 19 function 6 not configured
pci15 at mainbus0 bus 127
pci15: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 41 us, pow 350 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=83
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=83
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=83
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=83
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=83
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=83
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=83
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=83
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1800126390 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
mfii0: physical disk inserted id 32 enclosure 32
mfii0: physical disk inserted id 0 enclosure 32
mfii0: physical disk inserted id 1 enclosure 32
mfii0: physical disk inserted id 2 enclosure 32
mfii0: physical disk inserted id 3 enclosure 32
mfii0: physical disk inserted id 4 enclosure 32
mfii0: physical disk inserted id 5 enclosure 32
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 4: device present, speed: 3.0Gb/s
wd0 at atabus4 drive 0
wd0: <WDC WD80EFZX-68UW8N0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 7452 GB, 15504021 cyl, 16 head, 63 sec, 512 bytes/sect x 15628053168 sectors
wd0: GPT GUID: b7371639-9886-442e-a572-bd728313dded
dk0 at wd0: "primary", 1060250 blocks at 40, type: ntfs
dk1 at wd0: "f29665cf-8827-4d0a-a73f-13441479a438", 1060284 blocks at 1060296, type: ntfs
autoconfiguration error: wd0: wedge named 'primary' already existed, using 'f29665cf-8827-4d0a-a73f-13441479a438'
dk2 at wd0: "eda99187-64b9-4ffc-8f45-65847e72a1d0", 15608143526 blocks at 2120584, type: ntfs
autoconfiguration error: wd0: wedge named 'primary' already existed, using 'eda99187-64b9-4ffc-8f45-65847e72a1d0'
dk3 at wd0: "e3d7ef27-6297-4c6f-b8d0-6307926d2871", 1060288 blocks at 15610264112, type: ntfs
autoconfiguration error: wd0: wedge named 'primary' already existed, using 'e3d7ef27-6297-4c6f-b8d0-6307926d2871'
dk4 at wd0: "13da6fae-810a-406d-b270-20abc6bc4c0e", 16707592 blocks at 15611324408, type: ntfs
autoconfiguration error: wd0: wedge named 'primary' already existed, using '13da6fae-810a-406d-b270-20abc6bc4c0e'
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
sd0 at scsibus0 target 0 lun 0: <DELL, PERC H710P, 3.13> disk fixed
sd0: fabricating a geometry
sd0: 7451 GB, 7630336 cyl, 64 head, 32 sec, 512 bytes/sect x 15626928128 sectors
sd0: fabricating a geometry
sd0: GPT GUID: e7723149-9dd7-4d64-a983-cd0828629c1f
dk5 at sd0: "efi0", 204800 blocks at 2048, type: msdos
dk6 at sd0: "root0", 134217728 blocks at 206848, type: ffs
dk7 at sd0: "swap0", 33554432 blocks at 134424576, type: swap
dk8 at sd0: "home0", 134217728 blocks at 167979008, type: ffs
dk9 at sd0: "media0", 15324729344 blocks at 302196736, type: ffs
sd0: tagged queueing
sd1 at scsibus0 target 1 lun 0: <DELL, PERC H710P, 3.13> disk fixed
sd1: fabricating a geometry
sd1: 5588 GB, 5722624 cyl, 64 head, 32 sec, 512 bytes/sect x 11719933952 sectors
sd1: fabricating a geometry
sd1: GPT GUID: 995a9fc5-9da6-42a3-95c5-9733491204ef
dk10 at sd1: "media1", 11719929856 blocks at 2048, type: ffs
sd1: tagged queueing
sd2 at scsibus0 target 2 lun 0: <DELL, PERC H710P, 3.13> disk fixed
sd2: fabricating a geometry
sd2: 7451 GB, 7630336 cyl, 64 head, 32 sec, 512 bytes/sect x 15626928128 sectors
sd2: fabricating a geometry
sd2: GPT GUID: 1c175cb1-ad2b-47a2-b411-fe2de8515f0a
dk11 at sd2: "media2", 15626924032 blocks at 2048, type: ffs
sd2: tagged queueing
uhub2 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
uhub3 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub4 at uhub3 port 6: no manufacturer (0x413c) Gadget USB HUB (0xa001), class 9/0, rev 2.00/0.00, addr 3
uhub4: 6 ports with 6 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub4 port 1 configuration 1 interface 2
uhidev2: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ums1 at uhidev2: 3 buttons and Z dir
wsmouse1 at ums1 mux 0
wskbd0: disconnecting from wsdisplay0
wskbd0: detached
ukbd0: detached
uhidev0: detached
uhidev0: at uhub4 port 1 (addr 4) disconnected
wsmouse0: detached
ums0: detached
uhidev1: detached
uhidev1: at uhub4 port 1 (addr 4) disconnected
wsmouse1: detached
ums1: detached
uhidev2: detached
uhidev2: at uhub4 port 1 (addr 4) disconnected
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub4 port 1 configuration 1 interface 2
uhidev2: Avocent (0x624) Keyboard/Mouse Function (0x249), rev 2.00/0.00, addr 4, iclass 3/1
ums1 at uhidev2: 3 buttons and Z dir
wsmouse1 at ums1 mux 0
WARNING: 5 errors while detecting hardware; check system log.
boot device: sd0
root on dk6 dumps on dk7
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
mfii0: normal state on 'mfii0:0' (online)
mfii0: normal state on 'mfii0:1' (online)
mfii0: normal state on 'mfii0:2' (online)
ipmi0: version 32.0 interface KCS iobase 0xca8/0x8 spacing 4
ipmi0: ID 32.1 IPMI 2.0 Available +SDRs
ipmi0: Additional Chassis Bridge IPMBRcv FRU SEL SDR Sensor
ipmi0: Manufacturer 002a2 Product 01a2
ipmi0: Firmware 2.63
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)