Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2020-01-19 22:16:39
From: rgc
Description: iBook G4 Powerbook6,7 xenodm OK not all keys in JP keyboard map
[ using 1290952 bytes of bsd ELF symbol table ]
console out [ATY,Snowy_A] console in [keyboard]USB and ADB found, using ADB
using parent ATY,SnowyParent:: memaddr 98000000, size 8000000 : consaddr 98008000 : ioaddr 90020000, size 20000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.

OpenBSD 6.6 (GENERIC) #604: Sat Oct 12 13:10:27 MDT 2019
real mem = 1610612736 (1536MB)
avail mem = 1545392128 (1473MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerBook6,7
cpu0 at mainbus0: 7447A (Revision 0x102): 1333 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: no EEPROM found
spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
adt0 at iic0 addr 0x2e: adt7467 rev 0x71
asms0 at iic0 addr 0x58: rev 1.34, version 0.1
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
agp at pchb0 not configured
radeondrm0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9550" rev 0x80
drm0 at radeondrm0
radeondrm0: irq 48
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
"accelerometer-1" at macgpio0 offset 0x13 not configured
"accelerometer-2" at macgpio0 offset 0x14 not configured
"headphone-mute" at macgpio0 offset 0x1f not configured
"amp-mute" at macgpio0 offset 0x20 not configured
"hw-reset" at macgpio0 offset 0x25 not configured
"headphone-detect" at macgpio0 offset 0x17 not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
dfs0 at macgpio0 offset 0x6b: speeds: 1333, 666 MHz
"gpio4" at macgpio0 offset 0x1e not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
snapper0 at macobio0 offset 0x0: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 2 targets
apm0 at adb0: battery flags 0x5, 3% charged
piic0 at adb0
iic1 at piic0
akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout)
wskbd0 at akbd0: console keyboard
abtn0 at adb0 addr 7: brightness/volume/eject buttons
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DB0D> removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
bwi0 at pci1 dev 18 function 0 "Broadcom BCM4318" rev 0x02: irq 52, address xx:xx:xx:xx:xx:xx
ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <SUNEAST SSD SE800 mSATA 256GB>
wd0: 16-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address xx:xx:xx:xx:xx:xx
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable serial.07815571051126107434
sd0: 7633MB, 512 bytes/sector, 15633408 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple Internal Trackpad" rev 2.00/0.80 addr 3
uhidev2: iclass 3/1
utpms0 at uhidev2: Geyser Trackpad
wsmouse1 at utpms0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (ee165549fe35c33b.a) swap on wd0b dump on wd0b
initializing kernel modesetting (RV350 0x1002:0x4E56 0x1002:0x4E56 0x80).
[drm] *ERROR* Unable to locate a BIOS ROM
radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[drm] *ERROR* Failed to load firmware!
drm:pid0:r300_startup *ERROR* failed initializing CP (-2).
drm:pid0:r300_init *ERROR* Disabling GPU acceleration
radeondrm0: 1024x768, 16bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
hw.sensors.adt0.temp0=52.00 degC (Remote)
hw.sensors.adt0.temp1=53.00 degC (Internal)
hw.sensors.adt0.temp2=60.00 degC (Remote)
hw.sensors.adt0.volt0=0.00 VDC (+2.5Vin)
hw.sensors.adt0.volt1=1.29 VDC (Vccp)
hw.sensors.adt0.volt2=3.30 VDC (Vcc)
hw.sensors.adt0.volt3=0.00 VDC (+5V)
hw.sensors.adt0.volt4=0.00 VDC (+12V)
hw.sensors.asms0.raw0=-1 (X_ACCEL)
hw.sensors.asms0.raw1=0 (Y_ACCEL)
hw.sensors.asms0.raw2=-56 (Z_ACCEL)