Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-01-22 15:30:21
From: Toni
Description: OpenBSD 6.6 on HP ProLiant MicroServer N54L
OpenBSD 6.6 (GENERIC.MP) #372: Sat Oct 12 10:56:27 MDT 2019 xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4009295872 (3823MB) avail mem = 3875065856 (3695MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries) bios0: vendor HP version "O41" date 07/29/2011 bios0: HP ProLiant MicroServer acpi0 at bios0: ACPI 3.0 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST SSDT acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2197.44 MHz, 10-06-03 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: AMD erratum 721 detected and fixed cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2197.06 MHz, 10-06-03 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu1: AMD erratum 721 detected and fixed cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318180 Hz acpi0: unable to load \\_SB_._INI.EXH2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiprt2 at acpi0: bus -1 (PCE2) acpiprt3 at acpi0: bus -1 (PCE4) acpiprt4 at acpi0: bus 2 (PCE6) acpicpu0 at acpi0: C1(@1 halt!), PSS acpicpu1 at acpi0: C1(@1 halt!), PSS acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB ipmi at mainbus0 not configured cpu0: 2197 MHz: speeds: 2200 1900 1600 1300 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product 0x9602 rev 0x00 pci1 at ppb0 bus 1 radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00 drm0 at radeondrm0 radeondrm0: apic 2 int 18 ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1 (0x5784100): msi, address xx:xx:xx:xx:xx:xx brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4 ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI 1.2 ahci0: port 0: 1.5Gb/s ahci0: port 1: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST3500630AS, 3.AA> t10.ATA_ST3500630AS_5QG1151Y sd0: 476940MB, 512 bytes/sector, 976773168 sectors sd1 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA DT01ACA0, MS1O> naa.5000039feaef2490 sd1: 476940MB, 512 bytes/sector, 976773168 sectors ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci3 at ppb2 bus 3 ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb3 at ohci0: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1 vmm0 at mainbus0: SVM/RVI uhub6 at uhub1 port 1 configuration 1 interface 0 "Generic 4-Port USB 2.0 Hub" rev 2.10/1.04 addr 2 uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 3 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 uhidev2 at uhub6 port 3 configuration 1 interface 0 "Logitech Lenovo USB Optical Mouse" rev 2.00/63.00 addr 4 uhidev2: iclass 3/1 ums0 at uhidev2: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (374bfff1256c3f34.a) swap on sd0b dump on sd0b initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1609 0x00). r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [drm] *ERROR* Failed to load firmware! drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init drm0 detached radeondrm0 detached vga1 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)