Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2020-01-28 22:45:14
From: vezhlys
Description: eBox 3352DX3-AP (non DIAGNOSTIC build, rdcphy 0x0005 model added)
OpenBSD 6.6-stable (GENERIC.MP) #1: Sat Jan 18 20:50:18 EET 2020
    xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC.MP
real mem  = 2079670272 (1983MB)
avail mem = 2026131456 (1932MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/27/15, SMBIOS rev. 2.7 @ 0xfaf20 (43 entries)
bios0: vendor American Megatrends Inc. version "000" date 12/27/2015
bios0: RDC Semiconductor Co., Ltd. EMKORE
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MSDM SLIC OEMB
acpi0: wakeup devices USB1(S3) SLPB(S4)
acpitimer0 at acpi0: can't map i/o space
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Vortex86DX3 (686-class) 1.01 GHz, 06-01-01
cpu0: FPU,PSE,TSC,MSR,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE
cpu0: apic clock running at 666MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Vortex86DX3 (686-class) 1.01 GHz, 06-01-01
cpu1: FPU,PSE,TSC,MSR,CX8,APIC,SEP,PGE,CMOV,MMX,FXSR,SSE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P2)
acpiprt3 at acpi0: bus -1 (P0P3)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpitz0 at acpi0: critical temperature is 92 degC
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "RDC", unknown product 0x6023 rev 0x02
ppb0 at pci0 dev 1 function 0 "RDC R1031 PCIe" rev 0x01: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "RDC R1031 PCIe" rev 0x01: apic 2 int 17
pci2 at ppb1 bus 2
pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6035 rev 0x01
pcib1 at pci0 dev 7 function 1 vendor "RDC", unknown product 0x6035 rev 0x01
vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: apic 2 int 19, address xx:xx:xx:xx:xx:xx
rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x14: apic 2 int 18, version 1.0, legacy support
ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x08: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 12 function 0 "RDC R1012 IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SD32G D0 RDC SD-IDE HOST CONTROLLER>
wd0: 1-sector PIO, LBA, 29664MB, 60751872 sectors
pciide0: channel 1 ignored (disabled)
vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2015 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 14 function 0 "RDC R3010 HDA" rev 0x01: apic 2 int 18
azalia0: codecs: Realtek ALC262
audio0 at azalia0
"RDC R1060 USB" rev 0x02 at pci0 dev 15 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
isa at pcib1 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1
uhub1: device problem, disabling port 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (d8c2f4a9070f8fd3.a) swap on wd0b dump on wd0b
vte0: watchdog timeout