Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-03 02:09:04
From: afresh1
Description: OpenBSD 6.6-current (GENERIC.MP) sparc64 on Sun SUNW,Sun-Blade-1000
OpenBSD 6.6-current (GENERIC.MP) #203: Sun Feb 2 06:52:49 MST 2020
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 8589934592 (8192MB)
avail mem = 8424603648 (8034MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Blade 2000/1000 (2 X UltraSPARC-III+)
cpu0 at mainbus0: SUNW,UltraSPARC-III+ (rev 2.3) @ 900 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-III+ (rev 2.3) @ 900 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 7, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
bbc0 at ebus0 addr 0-fffff: AID 0x00
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23
iic0 at pcfiic0
pcfiic1 at ebus0 addr 30-31 ivec 0x23
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
admtemp1 at iic1 addr 0x4c: max1617
tda0 at iic1 addr 0x24
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
beep0 at ebus0 addr 32-37: clock 75MHz
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c: polled
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0: console
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI" rev 0x01: ivec 0x21d, address [_MAC_XXXXXXXXXX]
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version 1.0, legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec 0x218, using 4K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec 0x219, using 4K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
ifb0 at pci0 dev 1 function 0 "3D Labs Wildcat 5110" rev 0x01
ifb0: XVR-1200 (SUNW,375-3101), 1280x1024
wsdisplay0 at ifb0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
"3D Labs Wildcat 5110" rev 0x01 at pci0 dev 1 function 1 not configured
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
schizo1 at mainbus0: "Schizo", version 7, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci1 at schizo1
qla0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
qla0: firmware rev 2.2.6, attrs 0x7
scsibus3 at qla0: 256 targets, WWPN 21000003ba2fa45c, WWNN 21000003ba2fa45c
sym0 at scsibus3 targ 1 lun 0: <SEAGATE, ST373307FSUN72G, 0207> naa.2000000c50415df7
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST373307FSUN72G, 0207> naa.2000000c50415df7
sd0: 70007MB, 512 bytes/sector, 143374738 sectors
sym1 at scsibus3 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0638> naa.20000004cf27f50d
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST336605FSUN36G, 0638> naa.20000004cf27f50d
sd1: 34732MB, 512 bytes/sector, 71132959 sectors
upa0 at mainbus0
"ppm" at mainbus0 not configured
uhub0: device problem, disabling port 4
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
bootpath: /pci@8,600000/SUNW,qlc@4,0/fp@0,0/disk@2100000c50415df7,0
root on sd0a (8da5fb6fef06adf6.a) swap on sd0b dump on sd0b
uhub0: device problem, disabling port 4
uhub0: port error, restarting port 4
uhub0: device problem, disabling port 4
uhub0: port error, restarting port 4
uhub0: device problem, disabling port 4
uhub0: port error, restarting port 4
uhub0: device problem, disabling port 4
uhub0: port error, restarting port 4
uhub0: device problem, disabling port 4
uhub0: port error, restarting port 4
uhub0: port error, giving up port 4
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/11.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/11.10 addr 2
uhidev1: iclass 3/0
uhid0 at uhidev1: input=1, output=0, feature=0