Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-02-10 18:02:37
From: tsutsui
Description: NetBSD/macppc 9.0_RC2 UMAX Apus2000/200
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0_RC2 (GENERIC) #5: Tue Feb 11 00:45:10 JST 2020
	tsutsui@mirage:/s/netbsd-9/src/sys/arch/macppc/compile/GENERIC
total memory = 144 MB
avail memory = 126 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found ohare PIC at f3000000
bootpath: ata/ATA-Disk@0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 0x90c001<DOZE,DPM,ICE,DCE,NOPTI>, powersave: 1
cpu0: ohare L2 cache enabled
valkyriefb0 at mainbus0 address 0xf1000000
valkyriefb0: waiting for videopll...
memory0 at mainbus0
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x02)
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at irq 23
ex0: MAC address xx:xx:xx:xx:xx:xx
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
VIA Technologies VT83C572 USB Controller (USB serial bus, UHCI, revision 0x04) at pci0 dev 14 function 0 not configured
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
awacs0: speaker
audio0 at awacs0: playback, capture, full duplex
audio0: slinear_be:16 2ch 44100Hz, blk 23ms for playback
audio0: slinear_be:16 2ch 44100Hz, blk 23ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
videopll0 at iic0 addr 0x50: Apple onboard video PLL
wdc0 at obio0 offset 0x20000 irq property not found; using 13: DMA transfer
atabus0 at wdc0 channel 0
vmmask 7cc00000 schedmask 7fc00000 highmask 7fc00000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 10000000 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
IPsec: Initialized Security Association Processing.
adbkbd0 at nadb0 addr 2: extended keyboard
wskbd0 at adbkbd0 mux 1
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: 1-button, 100 dpi mouse
wsmouse1 at adbms0 mux 0
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-8024, 2.0e> cdrom removable
wd0 at atabus0 drive 0
wd0: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
swwdog0: software watchdog initialized
valkyriefb0: switched to 800 x 600 in 8 bit colour
wsdisplay1 at valkyriefb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wskbd0: connecting to wsdisplay1
valkyriefb0: switched to 800 x 600 in 8 bit colour
wsdisplay2 at valkyriefb0 kbdmux 1
wsmux1: connecting to wsdisplay2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/macppc/9.0/modules