Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-12 21:26:34
From: janus
Description: Dell Latitude C640 OpenBSD 6.6 i386
OpenBSD 6.6 (GENERIC) #298: Sat Oct 12 11:06:10 MDT 2019
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 267804672 (255MB)
avail mem = 247246848 (235MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 03/04/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf7690 (61 entries)
bios0: vendor Dell Computer Corporation version "A08" date 03/04/2003
bios0: Dell Computer Corporation Latitude C640
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1) USB1(S1) USB2(S1) MODM(S3) PCIE(S3) MPCI(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpiprt3 at acpi0: bus -1 (MPCI)
acpipwrres0 at acpi0: PADA, resource for ADPT
acpitz0 at acpi0: critical temperature is 99 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 32546 type LION oem "Sony Corp."
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz, 0f-02-07
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,PERF,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C" rev 0x78: irq 11, address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATCS04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0106> removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, SRS 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9, 0x9b4cb1 0x0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd0: 19076MB, 512 bytes/sector, 39069488 sectors
root on sd0a (601b46de57e4b5dc.a) swap on sd0b dump on sd0b
initializing kernel modesetting (RV200 0x1002:0x4C57 0x1028:0x012A 0x00).
radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[drm] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[drm] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1024x768, 16bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)