Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-02-25 12:30:51
From: kamil_at_netbsd
Description: Dell Inspiron 1750
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[     1.000000]         xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 4056 MB
[     1.000000] avail memory = 3914 MB
[     1.000000] rnd: seeded with 256 bits
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000003] Dell Inc. Inspiron 1750                   
[     1.000003] mainbus0 (root)
[     1.000003] ACPI: RSDP 0x00000000000FBDD0 000024 (v02 DELL  )
[     1.000003] ACPI: XSDT 0x00000000DDAC3E00 00005C (v01 DELL   WN09     27D90A17 ASL  00000061)
[     1.000003] ACPI: FACP 0x00000000DDAC3C9C 0000F4 (v04 DELL   WN09     27D90A17 ASL  00000061)
[     1.000003] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190405/tbfadt-642)
[     1.000003] ACPI: DSDT 0x00000000DDAC4400 0057A1 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[     1.000003] ACPI: FACS 0x00000000DDAD2C00 000040
[     1.000003] ACPI: HPET 0x00000000DDAC3F00 000038 (v01 DELL   WN09     00000001 ASL  00000061)
[     1.000003] ACPI: APIC 0x00000000DDAC4000 000068 (v01 DELL   WN09     27D90A17 ASL  00000047)
[     1.000003] ACPI: MCFG 0x00000000DDAC3FC0 00003E (v16 DELL   WN09     27D90A17 ASL  00000061)
[     1.000003] ACPI: SLIC 0x00000000DDAC409C 000176 (v01 DELL   WN09     27D90A17 ASL  00000061)
[     1.000003] ACPI: OSFR 0x00000000DDAC3600 00002B (v01 DELL   WN09   ? 4127D90A SL a 01000000)
[     1.000003] ACPI: SSDT 0x00000000DDAC2367 00066C (v01 PmRef  CpuPm    00003000 INTL 20050624)
[     1.000003] ACPI: 2 ACPI AML tables successfully acquired and loaded
[     1.000003] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
[     1.000003] cpu0 at mainbus0 apid 0
[     1.000003] cpu0: Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz, id 0x1067a
[     1.000003] cpu0: package 0, core 0, smt 0
[     1.000003] cpu1 at mainbus0 apid 1
[     1.000003] cpu1: Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz, id 0x1067a
[     1.000003] cpu1: package 0, core 1, smt 0
[     1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[     1.000003] acpi0: X/RSDT: OemId <DELL  , WN09   ,27d90a17>, AslId <ASL ,00000061>
[     1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFF89E48F748988 00023F (v01 PmRef  BspIst   00003000 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFF89E477DB1008 0005C6 (v01 PmRef  BspCst   00003001 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFF89E477DB0008 0001D7 (v01 PmRef  ApIst    00003000 INTL 20050624)
[     1.000003] ACPI: Dynamic OEM Table Load:
[     1.000003] ACPI: SSDT 0xFFFF89E477D0C9A8 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[     1.000003] acpi0: SCI interrupting at int 9
[     1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[     1.026834] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.026834] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[     1.026987] WSEC (PNP0C02) at acpi0 not configured
[     1.026987] pckbc1 at acpi0 (PS2M, SYN0602) (aux port): irq 12
[     1.026987] pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
[     1.026987] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
[     1.026987] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
[     1.026987] spkr0 at pcppi1: PC Speaker
[     1.026987] wsbell at spkr0 not configured
[     1.026987] midi0 at pcppi1: PC speaker
[     1.026987] sysbeep0 at pcppi1
[     1.026987] MB4 (PNP0C01) at acpi0 not configured
[     1.026987] acpivga0 at acpi0 (VID): ACPI Display Adapter
[     1.026987] acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
[     1.026987] acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
[     1.026987] acpiout1: brightness levels: [6,12,18,24,30,36,42,48,54,60,66,72,78,84,90,100]
[     1.026987] acpiout2 at acpivga0 (DP, 0x0300): ACPI Display Output Device
[     1.026987] acpiout3 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
[     1.026987] acpiout4 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
[     1.026987] acpiout5 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
[     1.026987] acpivga0: connected output devices:
[     1.026987] acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0
[     1.026987] acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
[     1.026987] acpivga0:   0x0300 (acpiout2): Unknown Output Device, head 0
[     1.026987] acpivga0:   0x0301 (acpiout3): Unknown Output Device, head 0
[     1.026987] acpivga0:   0x0302 (acpiout4): Unknown Output Device, head 0
[     1.026987] acpivga0:   0x0303 (acpiout5): Unknown Output Device, head 0
[     1.026987] acpivga1 at acpi0 (VID2): ACPI Display Adapter
[     1.026987] acpivga1: autoconfiguration error: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA
[     1.026987] MB2 (PNP0C01) at acpi0 not configured
[     1.026987] MB3 (PNP0C01) at acpi0 not configured
[     1.026987] MB1 (PNP0C01) at acpi0 not configured
[     1.026987] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[     1.026987] acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
[     1.026987] acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
[     1.026987] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[     1.026987] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[     1.026987] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[     1.026987] wmidell0 at acpiwmi0: Dell WMI mappings version 1
[     1.026987] acpitz0 at acpi0 (THM)
[     1.026987] acpitz0: levels: critical 105.0 C, passive cooling
[     1.026987] ACPI: Enabled 4 GPEs in block 00 to 3F
[     1.026987] pckbd0 at pckbc2 (kbd slot)
[     1.026987] pckbc2: using irq 1 for kbd slot
[     1.026987] wskbd0 at pckbd0: console keyboard
[     1.026987] pms0 at pckbc2 (aux slot)
[     1.026987] pms0: Synaptics touchpad version 7.2
[     1.026987] pms0: Extended W mode, Palm detect, Multi-finger Report
[     1.026987] pckbc2: using irq 12 for aux slot
[     1.026987] wsmouse0 at pms0 mux 0
[     1.026987] attimer1: attached to pcppi1
[     1.026987] pci0 at mainbus0 bus 0: configuration mode 1
[     1.026987] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.026987] pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
[     1.026987] agp0 at pchb0: G4X-family chipset
[     1.026987] agp0: detected 32252k stolen memory
[     1.026987] agp0: aperture at 0xe0000000, size 0x10000000
[     1.026987] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2a42 (rev. 0x07)
[     1.026987] vendor 8086 product 2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
[     1.026987] uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
[     1.026987] uhci0: interrupting at ioapic0 pin 20
[     1.026987] usb0 at uhci0: USB revision 1.0
[     1.026987] uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
[     1.026987] uhci1: interrupting at ioapic0 pin 21
[     1.026987] usb1 at uhci1: USB revision 1.0
[     1.026987] uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
[     1.026987] uhci2: interrupting at ioapic0 pin 22
[     1.026987] usb2 at uhci2: USB revision 1.0
[     1.026987] ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
[     1.026987] ehci0: interrupting at ioapic0 pin 22
[     1.026987] ehci0: EHCI version 1.0
[     1.026987] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
[     1.026987] usb3 at ehci0: USB revision 2.0
[     1.026987] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[     1.026987] hdaudio0: interrupting at msi0 vec 0
[     1.026987] hdafg0 at hdaudio0: vendor 111d product 76b2
[     1.026987] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[     1.026987] hdafg0: ADC01 2ch: Mic In [Jack]
[     1.026987] hdafg0: ADC02 2ch: Mic In [Built-In]
[     1.026987] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[     1.026987] audio0 at hdafg0: playback, capture, full duplex, independent
[     1.026987] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
[     1.026987] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
[     1.026987] spkr1 at audio0: PC Speaker (synthesized)
[     1.026987] wsbell at spkr1 not configured
[     1.026987] ppb0 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
[     1.026987] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.026987] pci1 at ppb0 bus 11
[     1.026987] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.026987] ppb1 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
[     1.026987] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.026987] pci2 at ppb1 bus 12
[     1.026987] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.026987] vendor 14e4 product 4315 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
[     1.026987] ppb2 at pci0 dev 28 function 2: vendor 8086 product 2944 (rev. 0x03)
[     1.026987] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.026987] pci3 at ppb2 bus 9
[     1.026987] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.026987] mskc0 at pci3 dev 0 function 0, Yukon-2 FE+ rev. A0 (0x0): msi1 vec 0
[     1.026987] msk0 at mskc0 port A: Ethernet address xx:xx:xx:xx:xx:xx
[     1.026987] makphy0 at msk0 phy 0: Marvell 88E3016 10/100 Fast Ethernet PHY, rev. 0
[     1.026987] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.026987] ppb3 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
[     1.026987] ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
[     1.026987] pci4 at ppb3 bus 13
[     1.026987] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.026987] uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
[     1.026987] uhci3: interrupting at ioapic0 pin 20
[     1.026987] usb4 at uhci3: USB revision 1.0
[     1.026987] uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
[     1.026987] uhci4: interrupting at ioapic0 pin 21
[     1.026987] usb5 at uhci4: USB revision 1.0
[     1.026987] uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
[     1.026987] uhci5: interrupting at ioapic0 pin 22
[     1.026987] usb6 at uhci5: USB revision 1.0
[     1.026987] ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
[     1.026987] ehci1: interrupting at ioapic0 pin 20
[     1.026987] ehci1: EHCI version 1.0
[     1.026987] ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
[     1.026987] usb7 at ehci1: USB revision 2.0
[     1.026987] ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
[     1.026987] pci5 at ppb4 bus 3
[     1.026987] pci5: i/o space, memory space enabled
[     1.026987] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
[     1.026987] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[     1.026987] ichlpcib0: 24-bit timer
[     1.026987] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[     1.026987] tco0: Min/Max interval 1/367 seconds
[     1.026987] ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
[     1.026987] ahcisata0: 64-bit DMA
[     1.026987] ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
[     1.026987] ahcisata0: interrupting at msi2 vec 0
[     1.026987] atabus0 at ahcisata0 channel 0
[     1.026987] atabus1 at ahcisata0 channel 1
[     1.026987] atabus2 at ahcisata0 channel 4
[     1.026987] atabus3 at ahcisata0 channel 5
[     1.026987] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
[     1.026987] ichsmb0: interrupting at ioapic0 pin 18
[     1.026987] iic0 at ichsmb0: I2C bus
[     1.026987] isa0 at ichlpcib0
[     1.026987] acpicpu0 at cpu0: ACPI CPU
[     1.026987] acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
[     1.026987] acpicpu0: C2: FFH, lat  17 us, pow   250 mW
[     1.026987] acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2100 MHz
[     1.026987] acpicpu0: P1: FFH, lat  10 us, pow 16607 mW, 1600 MHz
[     1.026987] acpicpu0: P2: FFH, lat  10 us, pow 15000 mW, 1200 MHz
[     1.026987] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.026987] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.026987] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.026987] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.026987] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.026987] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.026987] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.026987] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.026987] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[     1.026987] acpicpu1 at cpu1: ACPI CPU
[     1.026987] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[     1.026987] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.479098] acpiacad0: AC adapter online.
[     1.509116] acpibat0: Sanyo LION rechargeable battery
[     1.509116] acpibat0: granularity: low->warn 0.000 Ah, warn->full 0.000 Ah
[     1.529129] IPsec: Initialized Security Association Processing.
[     1.539136] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub0: 2 ports with 2 removable, self powered
[     1.539136] uhub1 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub1: 2 ports with 2 removable, self powered
[     1.539136] uhub2 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub2: 2 ports with 2 removable, self powered
[     1.539136] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.539136] uhub3: 6 ports with 6 removable, self powered
[     1.539136] uhub4 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub4: 2 ports with 2 removable, self powered
[     1.539136] uhub5 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub5: 2 ports with 2 removable, self powered
[     1.539136] uhub6 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[     1.539136] uhub6: 2 ports with 2 removable, self powered
[     1.539136] uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.539136] uhub7: 6 ports with 6 removable, self powered
[     1.579158] ahcisata0 port 0: device present, speed: 3.0Gb/s
[     1.579158] ahcisata0 port 1: device present, speed: 1.5Gb/s
[     3.150092] wd0 at atabus0 drive 0
[     3.150092] wd0: <WDC WD3200BEVT-75ZCT2>
[     3.150092] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     3.150092] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
[     3.230140] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[     3.230140] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[     3.230140] atapibus0 at atabus1: 1 targets
[     3.240146] cd0 at atapibus0 drive 0: <HL-DT-STDVD+/-RW GT30N, KZ2A1E14952, A100> cdrom removable
[     3.240146] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[     3.240146] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[     3.800479] umass0 at uhub3 port 5 configuration 1 interface 0
[     3.800479] umass0: Generic (0xbda) USB2.0-CRW (0x158), rev 2.00/58.88, addr 2
[     3.800479] umass0: using SCSI over Bulk-Only
[     3.800479] scsibus0 at umass0: 2 targets, 1 lun per target
[     3.800479] umass1 at uhub7 port 2 configuration 1 interface 0
[     3.800479] umass1: MediaTek Inc (0xe8d) MT1806 (0x1806), rev 2.00/0.00, addr 2
[     3.800479] umass1: using ATAPI over Bulk-Only
[     3.800479] sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
[     3.800479] atapibus1 at umass1: 2 targets
[     3.800479] sd0: drive offline
[     3.810485] cd1 at atapibus1 drive 0: <TSSTcorp, CDDVDW SE-208AB, TS03> cdrom removable
[     7.992968] uvideo0 at uhub3 port 6 configuration 1 interface 0: CN0R019P724879CJ06FL (0xc45) Integrated_Webcam_1.3M (0x6400), rev 2.00/94.28, addr 3
[     7.992968] video0 at uvideo0: CN0R019P724879CJ06FL (0xc45) Integrated_Webcam_1.3M (0x6400), rev 2.00/94.28, addr 3
[     8.002975] WARNING: 1 error while detecting hardware; check system log.
[     8.002975] boot device: wd0
[     8.002975] root on wd0a dumps on wd0b
[     8.063010] root file system type: ffs
[     8.063010] kern.module.path=/stand/amd64/9.0/modules
[     8.063010] kern info: [drm] Memory usable by graphics device = 512M
[     8.063010] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[     8.063010] kern info: [drm] Driver supports precise vblank timestamp query.
[     8.063010] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[     8.263128] intelfb0 at i915drmkms0
[     8.263128] intelfb0: framebuffer at 0xffff8b8068557000, size 1600x900, depth 32, stride 6400
[     9.213693] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[     9.213693] wsmux1: connecting to wsdisplay0
[    11.184865] wsdisplay0: screen 1 added (default, vt100 emulation)
[    11.194871] wsdisplay0: screen 2 added (default, vt100 emulation)
[    11.194871] wsdisplay0: screen 3 added (default, vt100 emulation)
[    11.194871] wsdisplay0: screen 4 added (default, vt100 emulation)
[   421.038217] cd1: detached
[   421.038217] atapibus1: detached
[   421.048225] umass1: detached
[   421.048225] umass1: at uhub7 port 2 (addr 2) disconnected
[   426.561497] udav0 at uhub5 port 2
[   426.561497] udav0: SUNRISING (0xfe6) USB 2.0 10/100M Ethernet Adaptor (0x9700), rev 1.10/1.01, addr 2
[   426.581509] udav0: Ethernet address xx:xx:xx:xx:xx:xx