Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-02-26 14:41:57
From: yamajun
Description: NetBSD/amd64 9.0 on Topjoy Falcon
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
	xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8012 MB
avail memory = 7753 MB
cpu_rng: RDSEED
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x3e<config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 79e2e018
TOPJOY Falcon (Default string)
mainbus0 (root)
ACPI: RSDP 0x0000000079A50000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079A500C0 0000EC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000079A5D9B0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000079A50250 00D75C (v02 ALASKA A M I    01072009 INTL 20160930)
ACPI: FACS 0x0000000079AD2080 000040
ACPI: FPDT 0x0000000079A5DAD0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000079A5DB20 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MSDM 0x0000000079A5DBC0 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000079A5DC20 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: DBG2 0x0000000079A5DC60 000072 (v00 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: DBGP 0x0000000079A5DCE0 000034 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: HPET 0x0000000079A5DD20 000038 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: LPIT 0x0000000079A5DD60 00005C (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: APIC 0x0000000079A5DDC0 000084 (v04 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: NPKT 0x0000000079A5DE50 000065 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A5DEC0 003F8A (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A61E50 000C84 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079A62AE0 000A19 (v01 Intel_ Platform 00001000 INTL 20160930)
ACPI: SSDT 0x0000000079A63500 000538 (v02 PmRef  Cpu0Ist  00003000 INTL 20160930)
ACPI: SSDT 0x0000000079A63A40 000775 (v02 CpuRef CpuSsdt  00003000 INTL 20160930)
ACPI: SSDT 0x0000000079A641C0 00035F (v02 PmRef  Cpu0Tst  00003000 INTL 20160930)
ACPI: SSDT 0x0000000079A64520 0001E6 (v02 PmRef  ApTst    00003000 INTL 20160930)
ACPI: SSDT 0x0000000079A64710 002892 (v02 SaSsdt SaSsdt   00003000 INTL 20160930)
ACPI: UEFI 0x0000000079A66FB0 000048 (v01 ALASKA A M I    00000002      01000013)
ACPI: TPM2 0x0000000079A67000 000034 (v04 ALASKA A M I    00000001 AMI  00000000)
ACPI: DMAR 0x0000000079A67040 0000A8 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: WDAT 0x0000000079A670F0 000104 (v01                 00000000      00000000)
ACPI: WSMT 0x0000000079A67200 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: BGRT 0x0000000079A67230 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
Firmware Error (ACPI): Failure creating named object [\_SB.PCI0.TCPU._ADR], AE_ALREADY_EXISTS (20190405/dswload2-369)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190405/psobject-264)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, id 0x706a1
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, id 0x706a1
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, id 0x706a1
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, id 0x706a1
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,00010013>
ACPI Error: No handler for Region [ECF2] (0xffffd6c85680ea50) [EmbeddedControl] (20190405/evregion-183)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190405/exfldio-323)
ACPI Error: Aborting method \_SB.PCI0.SBRG.H_EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20190405/psparse-581)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD6C8568E5AC8 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD6C6E728FE08 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFD6C6E7376120 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
ACC (BOSC0200) at acpi0 not configured
TPL1 (GDIX1001) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
CONV (ID9001) at acpi0 not configured
pckbc1 at acpi0 (PS2K, MSFT0001) (kbd port): io 0x60,0x64 irq 1
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [1-100]
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout8
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: autoconfiguration error: unknown output device acpiout10
acpivga0: autoconfiguration error: unknown output device acpiout11
acpivga0: autoconfiguration error: unknown output device acpiout12
acpivga0: autoconfiguration error: unknown output device acpiout13
acpivga0: autoconfiguration error: unknown output device acpiout14
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
GPO1 (INT3453) at acpi0 not configured
GPO0 (INT3453) at acpi0 not configured
GPO2 (INT3453) at acpi0 not configured
GPO3 (INT3453) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
HIDD (INT33D5) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
SEN4 (INT3403) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan0: autoconfiguration error: failed to initialize
acpitz0 at acpi0 (TZ01): cpu0
acpitz0: active cooling level 0: 65.0C
acpitz0: levels: critical 95.0 C, passive 95.0 C
ACPI: Enabled 4 GPEs in block 00 to 7F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 31f0 (rev. 0x03)
vendor 8086 product 318c (miscellaneous DASP, revision 0x03) at pci0 dev 0 function 1 not configured
genfb0 at pci0 dev 2 function 0: vendor 8086 product 3184 (rev. 0x03)
genfb0: framebuffer at 0x90000000, size 1024x768, depth 32, stride 4096
genfb0: shadow framebuffer enabled, size 3072 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 280d
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
vendor 8086 product 319a (miscellaneous communications, revision 0x03) at pci0 dev 15 function 0 not configured
ahcisata0 at pci0 dev 18 function 0: vendor 8086 product 31e3 (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xe536ff01<PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb0 at pci0 dev 19 function 0: vendor 8086 product 31d8 (rev. 0xf3)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci1 dev 0 function 0: vendor 8086 product 3165 (rev. 0x91)
iwm0: interrupting at msi2 vec 0
xhci0 at pci0 dev 21 function 0: vendor 8086 product 31a8 (rev. 0x03)
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 31ac (miscellaneous DASP, revision 0x03) at pci0 dev 22 function 0 not configured
vendor 8086 product 31ae (miscellaneous DASP, revision 0x03) at pci0 dev 22 function 1 not configured
vendor 8086 product 31b0 (miscellaneous DASP, revision 0x03) at pci0 dev 22 function 2 not configured
vendor 8086 product 31b2 (miscellaneous DASP, revision 0x03) at pci0 dev 22 function 3 not configured
vendor 8086 product 31b4 (miscellaneous DASP, revision 0x03) at pci0 dev 23 function 0 not configured
vendor 8086 product 31b6 (miscellaneous DASP, revision 0x03) at pci0 dev 23 function 1 not configured
vendor 8086 product 31b8 (miscellaneous DASP, revision 0x03) at pci0 dev 23 function 2 not configured
vendor 8086 product 31ba (miscellaneous DASP, revision 0x03) at pci0 dev 23 function 3 not configured
vendor 8086 product 31bc (miscellaneous DASP, revision 0x03) at pci0 dev 24 function 0 not configured
vendor 8086 product 31be (miscellaneous DASP, revision 0x03) at pci0 dev 24 function 1 not configured
vendor 8086 product 31c0 (miscellaneous DASP, revision 0x03) at pci0 dev 24 function 2 not configured
vendor 8086 product 31ee (miscellaneous DASP, revision 0x03) at pci0 dev 24 function 3 not configured
vendor 8086 product 31c2 (miscellaneous DASP, revision 0x03) at pci0 dev 25 function 0 not configured
vendor 8086 product 31c4 (miscellaneous DASP, revision 0x03) at pci0 dev 25 function 1 not configured
vendor 8086 product 31c6 (miscellaneous DASP, revision 0x03) at pci0 dev 25 function 2 not configured
sdhc0 at pci0 dev 28 function 0: vendor 8086 product 31cc (rev. 0x03)
sdhc0: interrupting at ioapic0 pin 39
sdhc0: SDHC 3.0, rev 16, SDMA, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks
sdmmc0 at sdhc0 slot 0
sdhc1 at pci0 dev 30 function 0: vendor 8086 product 31d0 (rev. 0x03)
sdhc1: interrupting at ioapic0 pin 42
sdhc1: SDHC 3.0, rev 16, SDMA, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V 3.3V, re-tuning mode 1 (128s timer), 2048 byte blocks
sdmmc1 at sdhc1 slot 0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 31e8 (rev. 0x03)
ichsmb0 at pci0 dev 31 function 1: vendor 8086 product 31d4 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 20
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  50 us, pow    10 mW
acpicpu0: C3: FFH, lat 150 us, pow    10 mW
acpicpu0: P0: FFH, lat  10 us, pow     0 mW, 1501 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow     0 mW, 1500 MHz
acpicpu0: P2: FFH, lat  10 us, pow     0 mW, 1400 MHz
acpicpu0: P3: FFH, lat  10 us, pow     0 mW, 1300 MHz
acpicpu0: P4: FFH, lat  10 us, pow     0 mW, 1200 MHz
acpicpu0: P5: FFH, lat  10 us, pow     0 mW, 1100 MHz
acpicpu0: P6: FFH, lat  10 us, pow     0 mW, 1000 MHz
acpicpu0: P7: FFH, lat  10 us, pow     0 mW,  900 MHz
acpicpu0: P8: FFH, lat  10 us, pow     0 mW,  800 MHz
acpicpu0: T0: FFH, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow     0 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow     0 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow     0 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow     0 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow     0 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow     0 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1497961880 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 7 ports with 7 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 9 ports with 9 removable, self powered
sdhc0: cmd timeout error
acpiacad0: AC adapter online.
sdhc1: cmd index error
sdhc1: cmd end bit error
sdhc1: cmd end bit error
ahcisata0 port 0: device present, speed: 6.0Gb/s
sdhc1: cmd index error
sdhc1: cmd end bit error
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: autoconfiguration error: couldn't enable card: 60
sdhc1: cmd end bit error
sdmmc1: sdmmc_mem_enable failed with error 60
sdmmc1: autoconfiguration error: couldn't enable card: 60
sdhc0: cmd timeout error
sdhc1: cmd index error
sdhc1: cmd end bit error
sdhc1: cmd end bit error
sdhc1: cmd index error
sdhc1: cmd end bit error
sdhc1: cmd end bit error
sdmmc1: sdmmc_mem_enable failed with error 60
sdmmc1: autoconfiguration error: couldn't enable card: 60
sdmmc0: sdmmc_mem_enable failed with error 60
sdmmc0: autoconfiguration error: couldn't enable card: 60
IPsec: Initialized Security Association Processing.
acpibat0: Intel SR 1 Real rechargeable battery
acpibat0: granularity: low->warn 0.029 Ah, warn->full 0.000 Ah
ubt0 at uhub1 port 3
ubt0: vendor 8087 (0x8087) product 0a2a (0xa2a), rev 2.00/0.01, addr 1
ahcisata0 port 1: PHY offline
wd0 at atabus0 drive 0
wd0: <Netac SSD 256GB>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: GPT GUID: 340fe8bf-84b2-4b54-afd4-279436fb2f89
dk0 at wd0: "00000000-0000-0000-0000-000000000000", 262144 blocks at 2048, type: msdos
dk1 at wd0: "EFI System Area", 483445357 blocks at 266240, type: ffs
autoconfiguration error: wd0: wedge named '00000000-0000-0000-0000-000000000000' already exists, manual intervention required
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhidev0 at uhub1 port 6 configuration 1 interface 0
uhidev0: HAILUCK CO.,LTD (0x258a) USB KEYBOARD (0x21), rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 6 configuration 1 interface 1
uhidev1: HAILUCK CO.,LTD (0x258a) USB KEYBOARD (0x21), rev 1.10/1.00, addr 2, iclass 3/0
uhidev1: 9 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhid3 at uhidev1 reportid 6: input=0, output=0, feature=1039
uhid4 at uhidev1 reportid 9: input=1, output=0, feature=0
WARNING: 21 errors while detecting hardware; check system log.
boot device: wd0
root on dk1
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
iwm0: hw rev 0x210, fw ver 22.361476.0, address xx:xx:xx:xx:xx:xx
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)