Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-02-29 19:52:12
From: c-c-c-c
Description: Thinkpad 240X
OpenBSD 6.6 (GENERIC) #298: Sat Oct 12 11:06:10 MDT 2019
xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 133644288 (127MB)
avail mem = 115552256 (110MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/21/99, BIOS32 rev. 0 @ 0xfd8b0, SMBIOS rev. 2.3 @ 0xec390 (31 entries)
bios0: vendor IBM version "1.03.09" date 12/21/1999
bios0: IBM 260961G
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP BOOT
acpi0: wakeup devices MDEM(S3) CRD0(S3) LID_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(@20 io@0x8015), !C2(@10 io@0x8014), C1(@1 halt!)
acpipwrres0 at acpi0: PCR0
acpipwrres1 at acpi0: PFAN, resource for FAN_
acpitz0 at acpi0: critical temperature is 100 degC
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"IBM0071" at acpi0 not configured
acpibtn0 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "BQ2040" serial type LION oem "SANYO"
acpibtn1 at acpi0: LID_
"PNP0C0B" at acpi0 not configured
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 498 MHz, 06-08-03
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82440MX Host" rev 0x01
pcib0 at pci0 dev 7 function 0 "Intel 82440MX ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82440MX IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk X300 MSATA 256GB>
wd0: 1-sector PIO, LBA48, 244198MB, 500118192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82440MX USB" rev 0x00: irq 11
piixpcib0 at pci0 dev 7 function 3 "Intel 82440MX Power" rev 0x00
vga1 at pci0 dev 9 function 0 "Silicon Motion LynxEM+" rev 0xa0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)cbb0 at pci0 dev 10 function 0 "TI PCI1211 CardBus" rev 0x00: irq 11
clct0 at pci0 dev 11 function 0 "Cirrus Logic CS4281 CrystalClear" rev 0x01: irq 5
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
iwi0 at pci0 dev 12 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 11, address xx:xx:xx:xx:xx:xx
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa at piixpcib0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (8a1341ee413d2b06.a) swap on wd0b dump on wd0b