Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-03-24 23:08:24
From: nisimura
Description: Compaq DeskPro 815E P3 933MHz NetBSD 9.0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
        xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Compaq Deskpro
mainbus0 (root)
ACPI: RSDP 0x00000000000E0010 000014 (v00 COMPAQ)
ACPI: RSDT 0x00000000000E0080 000050 (v01 COMPAQ CPQ0004  20020913      00000000)
ACPI: FACP 0x00000000000E0130 000074 (v01 COMPAQ SOLANO   00000001      00000000)
ACPI: DSDT 0x00000000000E0204 0012F5 (v01 COMPAQ DSDT     00000001 MSFT 0100000D)
ACPI: FACS 0x00000000000E0040 000040
ACPI: SSDT 0x00000000000E14F9 000174 (v01 COMPAQ CORE_UTL 00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E166D 000D1C (v01 COMPAQ VILLTBL1 00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E33B3 00005D (v01 COMPAQ FHUB     00000001 MSFT 0100000D)
ACPI: APIC 0x00000000000E01A4 000060 (v01 COMPAQ SOLANO   00000001      00000000)
ACPI: SSDT 0x00000000000E333D 000076 (v01 COMPAQ APIC     00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E2389 0006AD (v01 COMPAQ PNP_PRSS 00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E2A94 0001A4 (v01 COMPAQ S3       00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E2D90 00015D (v01 COMPAQ SIDETM   00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E310F 000117 (v01 COMPAQ GTF2     00000001 MSFT 0100000D)
ACPI: SSDT 0x00000000000E349B 00004E (v01 COMPAQ FINIS    00000001 MSFT 0100000D)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel 686-class, 930MHz, id 0x68a
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <COMPAQ,CPQ0004 ,20020913>, AslId <    ,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
NCP (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
ECP0 (PNP0401) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
FHUB (INT0800) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
MBRD (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1130 (rev. 0x02)
agp0 at pchb0: using generic initialization for Intel AGP
agp0: autoconfiguration error: : can't map aperture
ppb0 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x01)
pci1 at ppb0 bus 2
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet (rev. 0x01)
fxp0: interrupting at ioapic0 pin 20
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
radeon0 at pci1 dev 9 function 0: vendor 1002 product 5964 (rev. 0x01)
radeon0: autoconfiguration error: unable to reserve VGA registers for i386 radeondrmkms hack
vendor 1002 product 5d44 (miscellaneous display, revision 0x01) at pci1 dev 9 function 1 not configured
satalink0 at pci1 dev 10 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2440 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
fwhrng0 at ichlpcib0: Intel Firmware Hub Random Number Generator
piixide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus3 at piixide0 channel 1
uhci0 at pci0 dev 31 function 4: vendor 8086 product 2444 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio
auich0: interrupting at ioapic0 pin 17
auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo
auich0: ac97: ext id 0x1<VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
satalink0: port 1: device present, speed: 1.5Gb/s
auich0: measured ac97 link rate at 55128 Hz, will use 55000 Hz
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus1 drive 0
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0: <ST380815AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <COMPAQ  DVD-ROM SD-612B, , BL17> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.0/modules
kern info: [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x18BC:0x0141).
kern info: [drm] register mmio base: 0x40000000
kern info: [drm] register mmio size: 65536
kern info: [drm] Generation 2 PCI interface, using max accessible memory
radeon0: info: VRAM: 128M 0x0000000048000000 - 0x000000004FFFFFFF (128M used)
radeon0: info: GTT: 512M 0x0000000050000000 - 0x000000006FFFFFFF
kern info: [drm] Detected VRAM RAM=80M, BAR=128M
kern info: [drm] RAM width 64bits DDR
Zone  kernel: Available graphics memory: 40748 kiB
kern info: [drm] radeon: 128M of VRAM memory ready
kern info: [drm] radeon: 512M of GTT memory ready.
kern info: [drm] GART: num cpu pages 131072, num gpu pages 131072
kern info: [drm] PCI GART of 512M enabled (table at 0x000000000210D000).
radeon0: info: WB disabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000050000000 and cpu addr 0x0xd93fc000
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon0)
kern info: [drm] radeon: irq initialized.
kern info: [drm] Loading R200 Microcode
kern info: [drm] radeon: ring at 0x0000000050001000
kern info: [drm] ring test succeeded in 0 usecs
kern info: [drm] ib test succeeded in 0 usecs
kern info: [drm] No TV DAC info found in BIOS
kern info: [drm] Radeon Display Connectors
kern info: [drm] Connector 0:
kern info: [drm]   VGA-1
kern info: [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
kern info: [drm]   Encoders:
kern info: [drm]     CRT1: INTERNAL_DAC1
kern info: [drm] Connector 1:
kern info: [drm]   DVI-I-1
kern info: [drm]   HPD1
kern info: [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
kern info: [drm]   Encoders:
kern info: [drm]     CRT2: INTERNAL_DAC2
kern info: [drm]     DFP1: INTERNAL_TMDS1
kern info: [drm] Connector 2:
kern info: [drm]   SVIDEO-1
kern info: [drm]   Encoders:
kern info: [drm]     TV1: INTERNAL_DAC2
radeondrmkmsfb0 at radeon0
radeondrmkmsfb0: framebuffer at 0xd9620000, size 1024x768, depth 32, stride 4096
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)