Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-03-25 20:52:24
From: vezhlys
Description: ICOP VEX2-6427-5C4NE (Vortex86EX2)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.99.50 (GENERIC) #0: Sat Mar 21 20:20:59 UTC 2020
	xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 982 MB
sysctl_createv: sysctl_locate(maxtypenum) returned 2
pool redzone disabled for 'buf64k'
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x20<config_unit>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
DMP Vortex86EX (1.0)
mainbus0 (root)
Firmware Error (ACPI): A valid RSDP was not found (20191213/tbxfroot-261)
autoconfiguration error: acpi_probe: failed to initialize tables
ACPI Error: Could not remove SCI handler (20191213/evmisc-317)
cpu0 at mainbus0
ACPI Error: AE_BAD_PARAMETER, Thread 3242191616 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20191213/utmutex-328)
ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20191213/utmutex-369)
cpu0: Vortex86??, id 0x602
cpu0: node 0, package 0, core 0, smt 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: RDC Semiconductor product 6026 (rev. 0x00)
ppb0 at pci0 dev 4 function 0: RDC Semiconductor product 1031 (rev. 0x03)
ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 5 function 0: RDC Semiconductor product 1031 (rev. 0x03)
ppb1: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
RDC Semiconductor product 1930 (undefined, subclass 0xff) at pci0 dev 6 function 0 not configured
pcib0 at pci0 dev 7 function 0: RDC Semiconductor product 6013 (rev. 0x00)
pcib1 at pci0 dev 7 function 1: RDC Semiconductor product 6013 (rev. 0x00)
vte0 at pci0 dev 8 function 0: RDC Semiconductor R6040 10/100 Ethernet (rev. 0x00)
vte0: Ethernet address xx:xx:xx:xx:xx:xx
vte0: interrupting at irq 6
ukphy0 at vte0 phy 1: OUI 0x00d02d, model 0x0006, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: RDC Semiconductor R6060 USB OHCI (rev. 0x15)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 10 function 1: RDC Semiconductor R6061 USB EHCI (rev. 0x09)
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 2 ports: ohci0
usb1 at ehci0: USB revision 2.0
RDC Semiconductor product 1061 (USB serial bus, device) at pci0 dev 11 function 0 not configured
rdcide0 at pci0 dev 12 function 0: RDC R1012 IDE controller (rev. 0x05)
rdcide0: bus-master DMA support present
rdcide0: primary channel configured to compatibility mode
rdcide0: primary channel interrupting at irq 14
atabus0 at rdcide0 channel 0
rdcide0: secondary channel configured to compatibility mode
rdcide0: secondary channel ignored (disabled)
hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
hdaudio0: interrupting at irq 7
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1
hdafg0 at hdaudio0: vendor 10ec product 0262
hdafg0: autoconfiguration error: duplicate pin in association
hdafg0: autoconfiguration error: duplicate pin in association
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG03 2ch: SPDIF Out [Jack]
hdafg0: DIG04 2ch: Digital Out [Jack]
hdafg0: ADC05 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
RDC Semiconductor product 1331 (undefined, subclass 0xff, revision 0x01) at pci0 dev 15 function 0 not configured
RDC Semiconductor product 1331 (undefined, subclass 0xff, revision 0x01) at pci0 dev 16 function 0 not configured
RDC Semiconductor product 1331 (undefined, subclass 0xff, revision 0x01) at pci0 dev 17 function 0 not configured
RDC Semiconductor product 1070 (CANbus serial bus, revision 0x01) at pci0 dev 18 function 0 not configured
RDC Semiconductor product 1070 (CANbus serial bus, revision 0x01) at pci0 dev 18 function 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
intr_establish_xname: pic pic0 pin 5: can't share type 3 with 2
pckbc0 at isa0 port 0x60-0x64
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
pcic: does not support memory and I/O cards, ignored (ident=3)
pcic: does not support memory and I/O cards, ignored (ident=3)
pcic: does not support memory and I/O cards, ignored (ident=3)
pcic: does not support memory and I/O cards, ignored (ident=3)
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
isa at pcib1 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0
wd0: <SS16G D0 RDC SD-IDE HOST CONTROLLER>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 15193 MB, 30869 cyl, 16 head, 63 sec, 512 bytes/sect x 31116288 sectors
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: <SDU1 D1 RDC SD-IDE HOST CONTROLLER>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 30145 MB, 61246 cyl, 16 head, 63 sec, 512 bytes/sect x 61736960 sectors
wd1: GPT GUID: 36292da5-42ba-11e9-b01f-b8975aedc45e
dk0 at wd1: "362b043e-42ba-11e9-b01f-b8975aedc45e", 1024 blocks at 40, type: <unknown>
dk1 at wd1: "362f706e-42ba-11e9-b01f-b8975aedc45e", 58719232 blocks at 1064, type: ffs
dk2 at wd1: "3634aaf3-42ba-11e9-b01f-b8975aedc45e", 3016624 blocks at 58720296, type: swap
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(rdcide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(rdcide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
ehci_sync_hc: timed out
uhub1: autoconfiguration error: device problem, disabling port 1
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.99.50/modules
clock: unknown CMOS layout