Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-03-29 14:20:04
From: tsutsui
Description: NetBSD/sgimips 9.0 on R5000 O2 (repaired PSU)

                         Running power-on diagnostics...



System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 1


                           Starting up the system...


NetBSD/sgimips 9.0 Bootstrap, Revision 1.5 (Fri Feb 14 00:06:28 UTC 2020)

devopen: pci(0)scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
7655728+131888 [394544+386295]=0x82c514
[   1.0000000] phys segment: 0xe000 @ 0x2000
[   1.0000000] adding 0xe000 @ 0x2000 to freelist 0
[   1.0000000] phys segment: 0xd40000 @ 0x10000
[   1.0000000] adding 0x56000 @ 0x10000 to freelist 0
[   1.0000000] adding 0x4c2000 @ 0x88e000 to freelist 0
[   1.0000000] phys segment: 0xec00000 @ 0x1400000
[   1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.0 (GENERIC32_IP3x) #0: Fri Feb 14 00:06:28 UTC 2020
[   1.0000000] 	xxx@xxx.xxx:/usr/src/sys/arch/sgimips/compile/GENERIC32_IP3x
[   1.0000000] total memory = 255 MB
[   1.0000000] (6848 KB reserved for ARCS)
[   1.0000000] avail memory = 238 MB
[   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 9], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 unified cache
[   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
[   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
[   1.0000000] crmfb0: device unusable if not setup by firmware
[   1.0000000] mace0 at mainbus0 addr 0x1f000000
[   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
[   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
[   1.0000000] com0: console
[   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
[   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
[   1.0000000] pckbd0 at macekbc0 (kbd slot)
[   1.0000000] wskbd0 at pckbd0 mux 1
[   1.0000000] pms0 at macekbc0 (aux slot)
[   1.0000000] wsmouse0 at pms0 mux 0
[   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
[   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
[   1.0000000] mec0: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000000] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 0
[   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
[   1.0000000] audio0 at mavb0: playback
[   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 40ms for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
[   1.0000000] pci0 at macepci0 bus 0
[   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc0: interrupting at crime interrupt 8
[   1.0000000] ahc0: Using left over BIOS settings
[   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
[   1.0000000] ahc1: interrupting at crime interrupt 9
[   1.0000000] ahc1: Using left over BIOS settings
[   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
[   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
[   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[   1.0000000] tl0 at pci0 dev 3 function 0
[   1.0000000] tl0: Compaq Netelligent 10/100 TX
[   1.0000000] tl0: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000000] tl0: interrupting at crime interrupt 10
[   1.0000000] nsphy1 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
[   1.0000000] nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 5
[   1.0000000] tlphy0: no media present
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   1.0718963] scsibus1: waiting 2 seconds for devices to settle...
[   3.1341388] sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3367MC, 0107> disk fixed
[   3.2258124] sd0: 35003 MB, 29950 cyl, 4 head, 598 sec, 512 bytes/sect x 71687340 sectors
[   3.3241519] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
[   3.9539685] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> cdrom removable
[   4.0541050] cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
[  15.9659085] WARNING: 2 errors while detecting hardware; check system log.
[  16.0493235] boot device: sd0
[  16.0938803] root on sd0a dumps on sd0b
[  16.1539928] root file system type: ffs
[  16.2068349] kern.module.path=/stand/sgimips/9.0/modules
Sun Mar 29 23:10:22 JST 2020
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: airtrek
NIS domainname: xxxxxx
IPv6 mode: host
Configuring network interfaces: mec0.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Starting rpcbind.
Starting ypbind.
ypbind[234]: Domain xxxxxx is alive; server xxx.xxx.xxx.xxx
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting inetd.
Starting cron.
Sun Mar 29 23:11:15 JST 2020

NetBSD/sgimips (airtrek) (console)

login: root
Mar 29 23:11:51 airtrek login: ROOT LOGIN (root) on tty console
Last login: Sun May 12 11:09:07 2019 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0 (GENERIC32_IP3x) #0: Fri Feb 14 00:06:28 UTC 2020

Welcome to NetBSD!

You have new mail.
We recommend that you create a non-root account and use su(1) for root access.
airtrek#