Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-04-20 09:32:59
From: Badoom
Description: HP Z600 / AMD RX580
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p3 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           E5630  @ 2.53GHz (2527.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 51541704704 (49154 MB)
avail memory = 50108436480 (47787 MB)
CPU microcode: updated from 0x1e to 0x1f
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM TYLSBURG>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20181213/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20181213/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20181213/tbfadt-850)
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
Launching APs: 3 2 1 4 6 7 5
Timecounter "TSC-low" frequency 1263528707 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-WKS> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xe2000000-0xe201ffff,0xe2020000-0xe203ffff irq 28 at device 0.0 on pci1
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection> port 0xd020-0xd03f mem 0xe2040000-0xe205ffff,0xe2060000-0xe207ffff irq 40 at device 0.1 on pci1
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: xx:xx:xx:xx:xx:xx
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xe1000000-0xe103ffff irq 24 at device 0.0 on pci2
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xe1040000-0xe1043fff irq 34 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xc000-0xc01f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc020-0xc03f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xc040-0xc05f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe4004800-0xe4004bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac1: <Intel 82801JI HDA Controller> mem 0xe4000000-0xe4003fff irq 21 at device 27.0 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 21 at device 28.5 on pci0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20181213/dsfield-348)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20181213/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0x5784100> mem 0xe3000000-0xe300ffff irq 17 at device 0.0 on pci5
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc060-0xc07f irq 20 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc080-0xc09f irq 21 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc0a0-0xc0bf irq 22 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe4004c00-0xe4004fff irq 20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <serial bus, FireWire> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xc100-0xc107,0xc110-0xc113,0xc108-0xc10f,0xc114-0xc117,0xc0c0-0xc0df mem 0xe4004000-0xe40047ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib7: <ACPI Host-PCI bridge> on acpi0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
orm0: <ISA Option ROM> at iomem 0xe9000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALC262 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa1
pcm7: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa1
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BW240A4 DC32> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6002FRYZ-01WD5B1 01.01M03> ACS-2 ATA SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 5723166MB (11721045168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <INTEL SSDSC2CW060A3 400i> ACS-2 ATA SATA 2.x device
ada2: Serial Number xxxxxxxx
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 57241MB (117231408 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
GEOM: ada1: corrupt or invalid GPT detected.
GEOM: ada1: GPT rejected -- may not be recoverable.
GEOM: ada2: the primary GPT table is corrupt or invalid.
GEOM: ada2: using the secondary instead -- recovery strongly advised.
GEOM: label/tb6: corrupt or invalid GPT detected.
GEOM: label/tb6: GPT rejected -- may not be recoverable.
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen7.2: <vendor 0x0409 product 0x005a> at usbus7
uhub8 on uhub5
uhub8: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus7
Root mount waiting for: usbus7 usbus3
uhub8: 3 ports with 2 removable, bus powered
ugen3.2: <Generic USB2.0-CRW> at usbus3
umass0 on uhub2
umass0: <Bulk-In, Bulk-Out, Interface> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic- MS/MS-Pro/HG 1.00> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen0.2: <Broadcom Corp BCM20702A0> at usbus0
ugen7.3: <Topre Corporation HHKB Professional> at usbus7
ukbd0 on uhub8
ukbd0: <Topre Corporation HHKB Professional, class 0/0, rev 1.10/1.02, addr 3> on usbus7
da4 at umass-sim0 bus 0 scbus6 target 0 lun 4
da4: <Generic- SD/MMC/MS/MSPRO 1.00> Removable Direct Access SCSI device
da4: Serial Number xxxxxxxx
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
kbd2 at ukbd0
Root mount waiting for: usbus7 usbus3
ugen7.4: <Logitech USB Receiver> at usbus7
ukbd1 on uhub8
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 4> on usbus7
kbd3 at ukbd1
Root mount waiting for: usbus7 usbus3
ugen7.5: <Generic USB Audio> at usbus7
ugen3.3: <Mushkin Atlas Flux> at usbus3
umass1 on uhub2
umass1: <Mushkin Atlas Flux, class 0/0, rev 2.10/1.00, addr 3> on usbus3
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:7:1: Attached to scbus7
da5 at umass-sim1 bus 1 scbus7 target 0 lun 0
da5: <Mushkin Atlas Flux 0> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number xxxxxxxx
da5: 40.000MB/s transfers
da5: 953869MB (1953525168 512 byte sectors)
da5: quirks=0x2<NO_6_BYTE>
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7).
[drm] register mmio base: 0xE1000000
[drm] register mmio size: 262144
[drm] PCI I/O BAR is not found.
[drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
[drm] probing mlw for device 1002:67df = 400903
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
ATOM BIOS: 113-58045HED1-W91
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mc.bin
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; 
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 25134674 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
i_size_write unimplemented
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-3
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD6
[drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD4
[drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DP-3
[drm]   HPD1
[drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm]   HDMI-A-1
[drm]   HPD5
[drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm]   DVI-D-1
[drm]   HPD3
[drm]   DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm]   Encoders:
[drm]     DFP5: INTERNAL_UNIPHY
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_pfp_2.bin
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_me_2.bin
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_ce_2.bin
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_rlc.bin
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec_2.bin
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec2_2.bin
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma.bin
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma1.bin
i_size_write unimplemented
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_uvd.bin
[drm] Found UVD firmware Version: 1.130 Family ID: 16
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_vce.bin
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/polaris10_k_smc.bin
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0568000
[drm] vram apper at 0xD0000000
[drm] size 14745600
[drm] fb depth is 24
[drm]    pitch is 10240
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=1440 width=2560 depth=32
cmsize=16 size=14745600
pbase=0xd0568000 vbase=0xfffff800d0568000
name=drmn0 flags=0x0 stride=10240 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
i_size_write unimplemented
[drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
ubt0 on uhub3
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 2> on usbus0
ums0 on uhub8
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 4> on usbus7
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub8
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 4> on usbus7
uhid1 on uhub5
uhid1: <Generic USB Audio, class 0/0, rev 2.00/0.03, addr 5> on usbus7
uaudio0 on uhub5
uaudio0: <Maono Elf> on usbus7
uaudio0: No playback.
uaudio0: Record: 96000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm8: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
em1: link state changed to UP
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
Limiting closed port RST response from 220 to 200 packets/sec
[drm:amdgpu_atombios_dp_link_train_cr] displayport link status failed
[drm:amdgpu_atombios_dp_link_train_cr] clock recovery failed
[drm:amdgpu_atombios_dp_link_train_cr] displayport link status failed
[drm:amdgpu_atombios_dp_link_train_cr] clock recovery failed