Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-04-28 20:01:24
From: racoon
Description: Thinkpad X250 (yes suspend/resume, yes wifi, yes GPU acceleration)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0_STABLE (GENERIC) #20: Tue Apr 28 20:42:14 IST 2020
nia@r:/home/nia/netbsd-9/sys/arch/amd64/compile/obj/GENERIC
total memory = 7910 MB
avail memory = 7656 MB
cpu_rng: RDSEED
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 20CLS8FC08 (ThinkPad X250)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000CCDFE1C0 0000E4 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: DSDT 0x00000000CCDE3000 010FF7 (v02 LENOVO TP-N10 00001390 INTL 20120711)
ACPI: FACS 0x00000000CCD68000 000040
ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-N10 00001390 PTEC 00000001)
ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CCDE0000 000691 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: UEFI 0x00000000CCDD8000 000042 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: MSDM 0x00000000CCD42000 000055 (v03 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: BATB 0x00000000CCDD7000 00004A (v02 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: FPDT 0x00000000CCDD6000 000064 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: UEFI 0x00000000CCDD5000 000332 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: DMAR 0x00000000CCDD4000 0000B0 (v01 LENOVO TP-N10 00001390 PTEC 00000002)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins
x2APIC available but disabled by DMAR table
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, id 0x306d4
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <LENOVO,TP-N10 ,00001390>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI Error: Needed type [Reference], found [Integer] 0xffffa784a302c5e0 (20190405/exresop-114)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500)
ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA784A3081008 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA784A2FEC4C8 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, LEN0071) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0046) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat1 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, LEN0068)
PDRC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpiwmi2 at acpi0 (WMI3, PNP0C14-3): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
PCCD (INT340F) at acpi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 128.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.1
pms0: Extended W mode, Passthrough, Up/down buttons, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Core 5G Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel HD Graphics 5500 (rev. 0x09)
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: autoconfiguration error: RIRB timeout
hdaudio0: autoconfiguration error: RIRB timeout
xhci0 at pci0 dev 20 function 0: Intel Core 5G (mobile) USB xHCI (rev. 0x03)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
Intel Core 5G (mobile) ME Interface (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: I218 LM Ethernet Connection (rev. 0x03)
wm0: interrupting at msi2 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.2.3
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x6a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi3 vec 0
hdafg0 at hdaudio1: vendor 10ec product 0292
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: Intel Core 5G (mobile) PCIe (rev. 0xe3)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci1 dev 0 function 0: Realtek Semiconductor RTS5227 PCI-E Card Reader (rev. 0x01)
rtsx0: interrupting at msi4 vec 0
sdmmc0 at rtsx0
ppb1 at pci0 dev 28 function 1: Intel Core 5G (mobile) PCIe (rev. 0xe3)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci2 dev 0 function 0: Intel Dual Band Wireless AC 7265 (rev. 0x99)
iwm0: interrupting at msi5 vec 0
ehci0 at pci0 dev 29 function 0: Intel Core 5G (mobile) USB EHCI (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0: Intel Core 5G (mobile) LPC (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: Intel Core 5G (mobile) SATA Controller (AHCI) (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 3 ports, 32 slots, CAP 0xc734ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi6 vec 0
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: Intel Core 5G (mobile) SMBus (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
Intel Core 5G (mobile) Thermal (miscellaneous DASP, revision 0x03) at pci0 dev 31 function 6 not configured
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x0000104a rev 0x4e
acpicpu0 at cpu0: ACPI CPU
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA784A3602808 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 200 mW
acpicpu0: C3: FFH, lat 233 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2301 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 15000 mW, 2300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 14088 mW, 2200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 12462 mW, 2000 MHz
acpicpu0: P4: FFH, lat 10 us, pow 11745 mW, 1900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 11042 mW, 1800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 10215 mW, 1700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 8882 mW, 1500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 8101 mW, 1400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 7471 mW, 1300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 6121 mW, 1100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 5531 mW, 1000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 4955 mW, 900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 4267 mW, 800 MHz
acpicpu0: P14: FFH, lat 10 us, pow 3182 mW, 600 MHz
acpicpu0: P15: FFH, lat 10 us, pow 2538 mW, 500 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2294842580 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 11 ports with 11 removable, self powered
acpiacad0: AC adapter online.
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpibat1: SANYO LION rechargeable battery
acpibat1: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <INTEL SSDSC2BF180A5L>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 167 GB, 348861 cyl, 16 head, 63 sec, 512 bytes/sect x 351651888 sectors
wd0: GPT GUID: a5355668-5009-4f7e-b775-a3f97255f6ff
dk0 at wd0: "NetBSD", 67108864 blocks at 2048, type: ffs
dk1 at wd0: "swap", 16777216 blocks at 67112960, type: swap
dk2 at wd0: "Home", 251658240 blocks at 83890176, type: ffs
uvideo0 at uhub1 port 8 configuration 1 interface 0: SunplusIT Inc (0x5986) Integrated Camera (0x366), rev 2.00/10.19, addr 1
video0 at uvideo0: SunplusIT Inc (0x5986) Integrated Camera (0x366), rev 2.00/10.19, addr 1
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub3 at uhub2 port 1: vendor 8087 (0x8087) product 8001 (0x8001), class 9/0, rev 2.00/0.03, addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
WARNING: 9 errors while detecting hardware; check system log.
boot device: wd0
root on dk0 dumps on dk1
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 4096M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
kern info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
warning: /home/nia/netbsd-9/sys/external/bsd/drm2/dist/drm/i915/intel_uncore.c:649: Unclaimed register detected before writing to register 0xc5100
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffa900ac490000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)