Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-05-06 22:44:28
From: vezhlys
Description: ICOP VEX2-6427-5C4NE custom kernel with proper serial IRQs. boot -vx
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.99.60 (GENERIC_VEX2) #4: Thu May  7 01:34:10 EEST 2020
	andriusv@jarossd:/home/andriusv/workspace/netbsd-obj/sys/arch/i386/compile/GENERIC_VEX2
total memory = 1023 MB
avail memory = 982 MB
Random seed data path=/var/db/entropy-file len=536 pa=16de000
entropy: entering seed from bootloader
entropy: ready
pool redzone disabled for 'buf64k'
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x20<config_unit>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: missing or invalid systbl
BIOS32 rev. 0 found at 0xff046
SMBIOS rev. 2.7 @ 0x3ffe1420 (6 entries)
DMP Vortex86EX (1.0)
mainbus0 (root)
Firmware Error (ACPI): A valid RSDP was not found (20200326/tbxfroot-261)
autoconfiguration error: acpi_probe: failed to initialize tables
ACPI Error: Could not remove SCI handler (20200326/evmisc-317)
cpu0 at mainbus0
cpu0: 2 page colors
ACPI Error: AE_BAD_PARAMETER, Thread 3242461824 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20200326/utmutex-328)
ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20200326/utmutex-369)
cpu0: Vortex86EX2, id 0x602
cpu0: node 0, package 0, core 0, smt 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: RDC Semiconductor R6026 Host (rev. 0x00)
ppb0 at pci0 dev 4 function 0: RDC Semiconductor R1031 PCI-PCIE Bridge (rev. 0x03)
ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 5 function 0: RDC Semiconductor R1031 PCI-PCIE Bridge (rev. 0x03)
ppb1: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
RDC Semiconductor R1930 Hybrid Function Control Register (undefined, subclass 0xff) at pci0 dev 6 function 0 not configured
rdcpcib0 at pci0 dev 7 function 0: RDC Semiconductor R6013 PCI-ISA bridge (rev. 0x00)
rdcpcib0: watchdog timer configured.
rdcpcib1 at pci0 dev 7 function 1: RDC Semiconductor R6013 PCI-ISA bridge (rev. 0x00)
rdcpcib1: autoconfiguration error: couldn't map indirect registers
vte0 at pci0 dev 8 function 0: RDC Semiconductor R6040 10/100 Ethernet (rev. 0x00)
vte0: Ethernet address xx:xx:xx:xx:xx:xx
allocated pic pic0 type level pin 6 level 6 to cpu0 slot 6 idt entry 38
vte0: interrupting at irq 6
rdcphy0 at vte0 phy 1: R6040 10/100 media interface, rev. 0
rdcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: RDC Semiconductor R6060 USB OHCI (rev. 0x15)
allocated pic pic0 type level pin 5 level 6 to cpu0 slot 5 idt entry 37
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 10 function 1: RDC Semiconductor R6061 USB EHCI (rev. 0x09)
allocated pic pic0 type level pin 5 level 6 to cpu0 slot 5 idt entry 37
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 2 ports: ohci0
usb1 at ehci0: USB revision 2.0
RDC Semiconductor R1061 USB Device (USB serial bus, device) at pci0 dev 11 function 0 not configured
rdcide0 at pci0 dev 12 function 0: RDC R1012 IDE controller (rev. 0x05)
rdcide0: bus-master DMA support present
rdcide0: primary channel configured to compatibility mode
allocated pic pic0 type edge pin 14 level 6 to cpu0 slot 14 idt entry 46
rdcide0: primary channel interrupting at irq 14
atabus0 at rdcide0 channel 0
rdcide0: secondary channel configured to compatibility mode
rdcide0: secondary channel ignored (disabled)
hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
allocated pic pic0 type level pin 7 level 7 to cpu0 slot 7 idt entry 39
hdaudio0: interrupting at irq 7
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1
hdafg0 at hdaudio0 vendor 0x10EC product 0x0262 nid 0x01: vendor 10ec product 0262
hdafg0: autoconfiguration error: duplicate pin in association
hdafg0: autoconfiguration error: duplicate pin in association
hdafg0: DAC00 2ch: Speaker [Jack]
    nid=14 [pin: Speaker (Green Jack)]
           nid=0C [audio mixer] [source: dac, record]
                  nid=02 [audio output] [source: dac]
                  nid=0B [audio mixer] [source: record]
hdafg0: DAC01 2ch: HP Out [Jack]
    nid=1B [pin: HP Out (Green Jack)]
           nid=0D [audio mixer] [source: dac, record]
                  nid=03 [audio output] [source: dac]
                  nid=0B [audio mixer] [source: record]
hdafg0: DIG03 2ch: SPDIF Out [Jack]
    nid=1E [pin: SPDIF Out (Black Jack)]
           nid=06 [audio output] [source: dac]
hdafg0: DIG04 2ch: Digital Out [Jack]
    nid=11 [pin: Digital Out (Black Jack)]
           nid=10 [audio output] [source: dac]
hdafg0: ADC05 2ch: Mic In [Jack]
    nid=19 [pin: Mic In (Pink Jack)]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
RDC Semiconductor R1331 Motion Control (undefined, subclass 0xff, revision 0x01) at pci0 dev 15 function 0 not configured
RDC Semiconductor R1331 Motion Control (undefined, subclass 0xff, revision 0x01) at pci0 dev 16 function 0 not configured
RDC Semiconductor R1331 Motion Control (undefined, subclass 0xff, revision 0x01) at pci0 dev 17 function 0 not configured
RDC Semiconductor R1070 CANbus (CANbus serial bus, revision 0x01) at pci0 dev 18 function 0 not configured
RDC Semiconductor R1070 CANbus (CANbus serial bus, revision 0x01) at pci0 dev 18 function 1 not configured
isa0 at rdcpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
allocated pic pic0 type edge pin 4 level 8 to cpu0 slot 4 idt entry 36
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
allocated pic pic0 type edge pin 3 level 8 to cpu0 slot 3 idt entry 35
com2 at isa0 port 0x3e8-0x3ef irq 10: ns16550a, working fifo
allocated pic pic0 type edge pin 10 level 8 to cpu0 slot 10 idt entry 42
com3 at isa0 port 0x2e8-0x2ef irq 11: ns16550a, working fifo
allocated pic pic0 type edge pin 11 level 8 to cpu0 slot 11 idt entry 43
com4 at isa0 port 0x3e0-0x3e7 irq 4: ns16550a, working fifo
allocated pic pic0 type edge pin 4 level 8 to cpu0 slot 4 idt entry 36
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset error 5
pms0 at pckbc0 (aux slot)
pms0: synaptics_probe: Not synaptics.
pms0: reset 0 0xaa 0x00
allocated pic pic0 type edge pin 12 level 6 to cpu0 slot 12 idt entry 44
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
isa at rdcpcib1 not configured
SRAT: 0 NUMA nodes
Initializing SSP: cbe0f002 8ffe929 3aaece03 7cc4e66 33d7289 61decced a45d580 4fde778 
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
allocated pic pic0 type level pin 0 level 7 to cpu0 slot 0 idt entry 32
UVM: using package allocation scheme, 1 package(s) per bucket
TSC not known invariant on this CPU
timecounter: Timecounter "TSC" frequency 600038640 Hz quality -100
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at uhub1 port 1: Genesys Logic (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/60.70, addr 2
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <SD128 D0 RDC SD-IDE HOST CONTROLLER>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 116 GB, 241794 cyl, 16 head, 63 sec, 512 bytes/sect x 243728384 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(rdcide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
Searching for RAID components...
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.99.60/modules
clock: unknown CMOS layout