Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-05-30 16:41:49
From: dctrud
Description: Dell Optiplex 3020
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0_STABLE (GENERIC) #0: Mon May 25 17:31:36 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8110 MB
avail memory = 7850 MB
cpu_rng: RDRAND
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. OptiPlex 3020 (00)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
ACPI: XSDT 0x00000000D8FEE080 000084 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000D8FFAAE0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D8FEE198 00C948 (v02 DELL CBX3 00000014 INTL 20091112)
ACPI: FACS 0x00000000DA7FE080 000040
ACPI: APIC 0x00000000D8FFABF0 000072 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D8FFAC68 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SLIC 0x00000000D8FFACB0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000D8FFAE28 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000D8FFB368 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000D8FFBE40 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
ACPI: HPET 0x00000000D8FFC008 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D8FFC040 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: MCFG 0x00000000D8FFC3B0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000D8FFC3F0 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: MSDM 0x00000000D8FFF918 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, id 0x306c3
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, id 0x306c3
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, id 0x306c3
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, id 0x306c3
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <DELL , CBX3 ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E943B7A0008 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E943B7F2808 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E943B6F2E88 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c00 (rev. 0x06)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0412 (rev. 0x06)
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: autoconfiguration error: RIRB timeout
hdaudio0: autoconfiguration error: RIRB timeout
xhci0 at pci0 dev 20 function 0: vendor 8086 product 8c31 (rev. 0x04)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 8c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdafg0 at hdaudio1: vendor 10ec product 0280
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 8c10 (rev. 0xd4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: vendor 8086 product 8c16 (rev. 0xd4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix3 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 4: vendor 8086 product 8c18 (rev. 0xd4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci3 dev 0 function 0: Atheros AR9380
athn0: rev 3 (2T2R), ROM rev 0, address [_MAC_XXXXXXXXXX]
athn0: interrupting at ioapic0 pin 16
athn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 5: vendor 8086 product 8c1a (rev. 0xd4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci4 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi4 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ehci1 at pci0 dev 29 function 0: vendor 8086 product 8c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8c5c (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata1 at pci0 dev 31 function 2: vendor 8086 product 8c02 (rev. 0x04)
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc730ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata1: interrupting at msi5 vec 0
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x0000104a rev 0x4e
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 84000 mW, 3301 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 84000 mW, 3300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 76349 mW, 3100 MHz
acpicpu0: P3: FFH, lat 10 us, pow 69785 mW, 2900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 66595 mW, 2800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 60408 mW, 2600 MHz
acpicpu0: P6: FFH, lat 10 us, pow 54445 mW, 2400 MHz
acpicpu0: P7: FFH, lat 10 us, pow 48726 mW, 2200 MHz
acpicpu0: P8: FFH, lat 10 us, pow 43226 mW, 2000 MHz
acpicpu0: P9: FFH, lat 10 us, pow 40560 mW, 1900 MHz
acpicpu0: P10: FFH, lat 10 us, pow 35397 mW, 1700 MHz
acpicpu0: P11: FFH, lat 10 us, pow 30461 mW, 1500 MHz
acpicpu0: P12: FFH, lat 10 us, pow 25733 mW, 1300 MHz
acpicpu0: P13: FFH, lat 10 us, pow 23449 mW, 1200 MHz
acpicpu0: P14: FFH, lat 10 us, pow 19043 mW, 1000 MHz
acpicpu0: P15: FFH, lat 10 us, pow 14837 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3292552530 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata1 port 0: device present, speed: 6.0Gb/s
ahcisata1 port 1: device present, speed: 1.5Gb/s
urtwn0 at uhub1 port 3
urtwn0: Realtek (0x2357) 802.11n NIC (0x109), rev 2.10/2.00, addr 1
wd0 at atabus0 drive 0
wd0: <ST2000DL001-9VT156>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors (0 bytes/physsect; first aligned sector: 8)
wd0: GPT GUID: b569e05d-3397-4d57-ae4d-3245aa49d400
dk0 at wd0: "8e589191-5e9c-9941-be3f-b9df49a14923", 3907027057 blocks at 2048, type: <unknown>
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD20EARS-00MVWB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: GPT GUID: dfb169ef-3d3a-4264-b549-b7ea099f4e87
dk1 at wd1: "84436f04-9bdf-3747-b6a7-643012a2c8ef", 3907027057 blocks at 2048, type: <unknown>
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd2 at atabus2 drive 0
wd2: <KINGSTON SA400S37120G>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd2: GPT GUID: f81bfc55-86ef-49a0-93fa-d39317d19ce3
dk2 at wd2: "5e8b2138-ba9e-ff49-9859-d24f98022de8", 217830253 blocks at 64, type: ffs
dk3 at wd2: "00000000-0000-0000-0000-000000000000", 16611279 blocks at 217830336, type: swap
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd2(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DH-16AES, FY13D7363951S63I5A01, DD11> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
urtwn0: MAC/BB RTL8192EU, RF 6052 2T2R, address [_MAC_XXXXXXXXXX]
urtwn0: 1 rx pipe, 3 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.04, addr 2
uhub4: single transaction translator
uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.04, addr 2
uhub5: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5: 4 ports with 4 removable, self powered
WARNING: 3 errors while detecting hardware; check system log.
boot device: wd2
root on dk2 dumps on dk3
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 2048M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
i915drmkms0: info: No connectors reported connected with modes
kern info: [drm] Cannot find any crtc or sizes - going 1024x768
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffd180ae887000, size 1024x768, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
WARNING: ZFS on NetBSD is under development
ZFS filesystem version: 5
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)