Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-06-06 18:07:51
From: RobCrowston
Description: Raspberry Pi 4 8 GB model
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Type Physical Virtual #Pages Attr
Reserved 000000000000 0 0000000a WB
ConventionalMemory 00000000a000 a000 00007ee7 WB
ACPIReclaimMemory 000007ef1000 7ef1000 0000001e WB
ConventionalMemory 000007f0f000 7f0f000 00028eac WB
BootServicesData 000030dbb000 30dbb000 00000001 WB
LoaderData 000030dbc000 30dbc000 00008001 WB
LoaderCode 000038dbd000 38dbd000 000000a9 WB
Reserved 000038e66000 38e66000 00000002 WB
LoaderData 000038e68000 38e68000 000010ac WB
LoaderCode 000039f14000 39f14000 0000001b WB
Reserved 000039f2f000 39f2f000 00000007 WB
BootServicesData 000039f36000 39f36000 00000001 WB
RuntimeServicesData 000039f37000 39f37000 00000001 WB RUNTIME
BootServicesData 000039f38000 39f38000 00000002 WB
Reserved 000039f3a000 39f3a000 00000001 WB
BootServicesData 000039f3b000 39f3b000 00000002 WB
RuntimeServicesData 000039f3d000 39f3d000 00000002 WB RUNTIME
Reserved 000039f3f000 39f3f000 00000001 WB
BootServicesData 000039f40000 39f40000 00000001 WB
Reserved 000039f41000 39f41000 00000001 WB
BootServicesData 000039f42000 39f42000 00000002 WB
Reserved 000039f44000 39f44000 00000001 WB
LoaderData 000039f45000 39f45000 0000140b WB
RuntimeServicesCode 00003b350000 3b350000 00000010 WB RUNTIME
LoaderData 00003b360000 3b360000 000000a0 WB
BootServicesData 000040000000 40000000 000bc000 WB
MemoryMappedIO 0000fe100000 fe100000 00000001 RUNTIME
BootServicesData 000100000000 100000000 00100000 WB
Physical memory chunk(s):
0x0000a000 - 0x07ef0fff, 126 MB ( 32487 pages)
0x07f0f000 - 0x38e65fff, 783 MB ( 200535 pages)
0x38e68000 - 0x39f2efff, 16 MB ( 4295 pages)
0x39f36000 - 0x39f39fff, 0 MB ( 4 pages)
0x39f3b000 - 0x39f3efff, 0 MB ( 4 pages)
0x39f40000 - 0x39f40fff, 0 MB ( 1 pages)
0x39f42000 - 0x39f43fff, 0 MB ( 2 pages)
0x39f45000 - 0x3b34ffff, 20 MB ( 5131 pages)
0x3b360000 - 0x3b3fffff, 0 MB ( 160 pages)
0x40000000 - 0xfbffffff, 3008 MB ( 770048 pages)
0x100000000 - 0x1ffffffff, 4096 MB (1048576 pages)
Excluded memory regions:
0x00000000 - 0x00009fff, 0 MB ( 10 pages) NoAlloc
0x07ef1000 - 0x07f0efff, 0 MB ( 30 pages) NoAlloc
0x30e00000 - 0x32176fff, 19 MB ( 4983 pages) NoAlloc
0x38e66000 - 0x38e67fff, 0 MB ( 2 pages) NoAlloc
0x39f2f000 - 0x39f35fff, 0 MB ( 7 pages) NoAlloc
0x39f37000 - 0x39f37fff, 0 MB ( 1 pages) NoAlloc
0x39f3a000 - 0x39f3afff, 0 MB ( 1 pages) NoAlloc
0x39f3d000 - 0x39f3ffff, 0 MB ( 3 pages) NoAlloc
0x39f41000 - 0x39f41fff, 0 MB ( 1 pages) NoAlloc
0x39f44000 - 0x39f44fff, 0 MB ( 1 pages) NoAlloc
0x3b350000 - 0x3b35ffff, 0 MB ( 16 pages) NoAlloc
0x3e3cf000 - 0x3ebb7fff, 7 MB ( 2025 pages) NoAlloc
0xfe100000 - 0xfe100fff, 0 MB ( 1 pages) NoAlloc
Found 4 CPUs in the device tree
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #4 2ea0830e9c8-c268882(rpi4-pcie): Sat May 30 13:52:51 BST 2020
[_EMAIL_XXXXXXXXXXXXXXX]:/skeleton/root/sandbox/work-rpi4.00/obj/skeleton/root/sandbox/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-rc1-0-gf79cd71e145)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1920x1080
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff00000114a000.
Preloaded hostuuid "/etc/hostid" at 0xffff000001153138.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffff000001153188.
module firmware already present!
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
Module simplebus/pcib failed to register: 17
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: read 4096 bytes from preloaded cache
random: unblocking device.
VIMAGE (virtualized network stack) enabled
hostuuid: using 30303031-3030-3030-3031-376366353138
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
MAP 39f37000 mode 2 pages 1
MAP 39f3d000 mode 2 pages 2
MAP 3b350000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
mem: <memory>
crypto: <crypto core>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus3: <Flattened device tree simple bus> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 31 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
efirtc0: cannot read EFI realtime clock, error 78
ofwbus0: <framebuffer@3e3cf000> mem 0x3e3cf000-0x3ebb7fff compat simple-framebuffer (no driver attached)
simplebus0: <timer@7e003000> mem 0x7e003000-0x7e003fff irq 8,9,10,11 compat brcm,bcm2835-system-timer (no driver attached)
simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 12 disabled compat brcm,bcm2835-txp (no driver attached)
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2711-cprman (no driver attached)
simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 13 compat brcm,bcm2711-rng200 (no driver attached)
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 14 on simplebus0
simplebus0: <gpio@7e200000> mem 0x7e200000-0x7e2000b3 irq 15,16 compat brcm,bcm2711-gpio (no driver attached)
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 17 on simplebus0
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 18 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
simplebus0: <spi@7e204000> mem 0x7e204000-0x7e2041ff irq 19 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e2051ff irq 20 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c0mux> disabled compat i2c-mux-pinctrl (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 21 disabled compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached)
uart1: <BCM2835 Mini-UART> mem 0x7e215040-0x7e21507f irq 22 on simplebus0
uart1: console (115200,n,8,1)
uart1: fast interrupt
uart1: PPS capture mode: DCD
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 23 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 24 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 25 disabled compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 26 disabled compat brcm,bcm2835-dsi1 (no driver attached)
simplebus0: <i2c@7e804000> mem 0x7e804000-0x7e804fff irq 27 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 28 disabled compat brcm,bcm2835-vec (no driver attached)
simplebus0: <usb@7e980000> mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 29,30 disabled compat brcm,bcm2708-usb (no driver attached)
simplebus0: <local_intc@40000000> mem 0x40000000-0x400000ff compat brcm,bcm2836-l1-intc (no driver attached)
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 32,33,34,35,36,37,38,39,40,41,42 on simplebus0
Checking root against raspberrypi,model-b
Checking root against brcm,bcm2835
Checking root against brcm,bcm2709
Checking root against brcm,bcm2836
Checking root against brcm,bcm2837
Checking root against brcm,bcm2711
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 43 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 44 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 45 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 46 disabled compat arm,pl011 (no driver attached)
simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 47 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 48 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 49 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 50 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 51 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 52 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 53 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 54 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 55 disabled compat brcm,bcm2711-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 56 disabled compat brcm,bcm2711-pixelvalve1 (no driver attached)
simplebus0: <pixelvalve@7e20a000> mem 0x7e20a000-0x7e20a0ff irq 57 disabled compat brcm,bcm2711-pixelvalve2 (no driver attached)
simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 disabled compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <pixelvalve@7e216000> mem 0x7e216000-0x7e2160ff irq 58 disabled compat brcm,bcm2711-pixelvalve4 (no driver attached)
simplebus0: <pixelvalve@7ec12000> mem 0x7ec12000-0x7ec120ff irq 59 disabled compat brcm,bcm2711-pixelvalve3 (no driver attached)
simplebus0: <clock@7ef00000> mem 0x7ef00000-0x7ef0000f compat brcm,brcm2711-dvp (no driver attached)
simplebus0: <hdmi@7ef00700> mem 0x7ef00700-0x7ef009ff,0x7ef00300-0x7ef004ff,0x7ef00f00-0x7ef00f7f,0x7ef00f80-0x7ef00fff,0x7ef01b00-0x7ef01cff,0x7ef01f00-0x7ef022ff,0x7ef00200-0x7ef0027f,0x7ef04300-0x7ef043ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 60 disabled compat brcm,bcm2711-hdmi0 (no driver attached)
simplebus0: <i2c@7ef04500> mem 0x7ef04500-0x7ef045ff,0x7ef00b00-0x7ef00dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached)
simplebus0: <hdmi@7ef05700> mem 0x7ef05700-0x7ef059ff,0x7ef05300-0x7ef054ff,0x7ef05f00-0x7ef05f7f,0x7ef05f80-0x7ef05fff,0x7ef06b00-0x7ef06cff,0x7ef06f00-0x7ef072ff,0x7ef00280-0x7ef002ff,0x7ef09300-0x7ef093ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 61 disabled compat brcm,bcm2711-hdmi1 (no driver attached)
simplebus0: <i2c@7ef09500> mem 0x7ef09500-0x7ef095ff,0x7ef05b00-0x7ef05dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached)
simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached)
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
simplebus0: <mmc@7e300000> mem 0x7e300000-0x7e3000ff irq 62 disabled compat brcm,bcm2835-mmc (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 63 on simplebus0
sdhci_bcm0: SDHCI frequency: 250MHz
sdhci_bcm0-slot0: 250MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000000
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_bcm0
simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 64 disabled compat raspberrypi,rpi-firmware-kms (no driver attached)
simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 65 disabled compat brcm,bcm2835-smi (no driver attached)
simplebus0: <csi@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 66 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <csi@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 67 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1920x1080(1920x1080@0,0) 32bpp
fb0: fbswap: 1, pitch 7680, base 0x3e3cf000, screen_size 8355840
simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
simplebus0: <thermal@7d5d2200> mem 0x7d5d2200-0x7d5d222b irq 68 compat brcm,avs-tmon-bcm2711 (no driver attached)
ofwbus0: <gpu> disabled compat brcm,bcm2711-vc5 (no driver attached)
ofwbus0: <firmware-clocks> compat raspberrypi,firmware-clocks (no driver attached)
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f irq 69,70 on simplebus1
pcib0: parsing FDT for ECAM0:
pcib0: PCI addr: 0xf8000000, CPU addr: 0x600000000, Size: 0x4000000
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: Bus is not cache-coherent
pcib0: hardware identifies as revision 0x304.
pcib0: note: reported link speed is 5.0 GT/s.
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x14e4, dev=0x2711, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
secbus=0, subbus=0
pcib1: <PCI-PCI bridge> irq 82 at device 0.0 on pci0
pcib1: Lazy allocation of 1 bus at 1
pcib0: rman_reserve_resource: start=0xf8000000, end=0xf80fffff, count=0x100000
pcib0: rman_reserve_resource: start=0xf8000000, end=0xf80fffff, count=0x100000
pcib0: bcm_pcib_alloc_resource FAIL: type=3, rid=36, start=00000000f8000000, end=00000000f80fffff, count=0000000000100000, flags=40
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: memory decode 0x0-0xfffff
pci1: <PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x1106, dev=0x3483, revid=0x01
domain=0, bus=1, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type Memory, range 64, base 0, size 12, memory disabled
pcib1: slot 0 INTA is routed to irq 83
xhci0: <XHCI (generic) USB 3.0 controller> irq 83 at device 0.0 on pci1
pcib1: allocated memory range (0xf8000000-0xf8000fff) for rid 10 of xhci0
xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000
xhci0: 32 bytes context size, 64-bit DMA
xhci0: attempting to allocate 1 MSI vectors (4 supported)
xhci0: using IRQ 84 for MSI
xhci0: MSI enabled
xhci0: Controller reset timeout.
xhci0: XHCI halt/start/probe failed err=18
xhci0: Controller reset timeout.
device_attach: xhci0 attach returned 6
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 71,72 on simplebus1
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x18c086, model 0x000a, rev. 2
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
genet0: bpf attached
genet0: Ethernet address: [_MAC_XXXXXXXXXX]
simplebus1: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 73,74,75,76 compat brcm,bcm2711-dma (no driver attached)
simplebus1: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 77 compat brcm,bcm2711-vchiq (no driver attached)
simplebus1: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 78 disabled compat generic-xhci (no driver attached)
simplebus1: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat raspberrypi,rpivid-hevc-decoder (no driver attached)
simplebus1: <rpivid-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq 79 compat raspberrypi,rpivid-local-intc (no driver attached)
simplebus1: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat raspberrypi,rpivid-h264-decoder (no driver attached)
simplebus1: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat raspberrypi,rpivid-vp9-decoder (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
simplebus2: <v3d@7ec04000> mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 80 disabled compat brcm,2711-v3d (no driver attached)
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 81 on simplebus3
sdhci_bcm1: SDHCI frequency: 100MHz
sdhci_bcm1-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO embedded
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0xf5f0ac00 | Version: 0x00001002
sdhci_bcm1-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x1fff0000 | Host ctl: 0x00000002
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000080
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci_bcm1-slot0: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525
sdhci_bcm1-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Card inserted
mmc1: <MMC/SD bus> on sdhci_bcm1
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
Device configuration finished.
Found SMCCC version 1.0
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usb_needs_explore_all: no devclass
sdhci_bcm0-slot0: Divider 313 for freq 399361 (base 250000000)
mmc0: Probing bus
mmc0: SD probe: failed
mmc0: MMC probe: failed
mmc0: Current OCR: 0x00000000
mmc0: No compatible cards found on bus
sdhci_bcm1-slot0: Divider 125 for freq 400000 (base 100000000)
mmc1: Probing bus
mmc1: SD 2.0 interface conditions: OK
mmc1: SD probe: OK (OCR: 0x40ff8000)
mmc1: Current OCR: 0x00ff8000
mmc1: Probing cards
mmc1: New card detected (CID 035344534333324780b7731cc3014300)
mmc1: New card detected (CSD 400e00325b590000edc87f800a404000)
mmc1: Card at relative address 0xaaaa added:
mmc1: card: SDHC SC32G 8.0 SN B7731CC3 MFG 03/2020 by 3 SD
mmc1: quirks: 0
mmc1: bus: 4bit, 50MHz (high speed timing)
mmc1: memory: 62333952 blocks, erase sector 8192 blocks
mmc1: setting transfer rate to 50.000MHz (high speed timing)
sdhci_bcm1-slot0: Divider 1 for freq 50000000 (base 100000000)
mmcsd0: 32GB <SDHC SC32G 8.0 SN B7731CC3 MFG 03/2020 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
Release APs...done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
GEOM: new disk mmcsd0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
mmc1: setting bus width to 4 bits high speed timing
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
regulator: shutting down unused regulators
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-B7731CC3, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-B7731CC3, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/5ecd686140e41d91, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-B7731CC3s2, BSD) is not aligned on 4194304 bytes
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
GEOM_PART: partition 1 on (diskid/DISK-B7731CC3, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-B7731CC3, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/5ecd686140e41d91, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-B7731CC3s2, BSD) is not aligned on 4194304 bytes
lo0: link state changed to UP
genet0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
genet0: link state changed to DOWN
genet0: link state changed to UP