Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-06-12 04:58:06
From: klaus
Description: FreeBSD-13_RPI4UEFIdev_acpi_test_D25201
x2 total-size: 64 Gbit 3200
recover4.elf not found
recovery.elf not found
Read start4.elf bytes 2274272 hnd 0x000000a5 hash a71eea9d75519554
Read fixup4.dat bytes 5407 hnd 0x00000065 hash e4ad9a0c1bb698cc
0x00d03114 0x00000000 0x0000001f
MEM GPU: 76 ARM: 948 TOTAL: 1024
FIXUP src: 128 256 dst: 948 1024
Starting start4.elf @ 0xfec00200
NOTICE: BL31: v2.3():v2.3
NOTICE: BL31: Built : 10:40:51, Apr 21 2020
UEFI firmware (version UEFI Firmware v1.14 built at 11:11:03 on Jun 9 2020)
ESC (setup), F1 (shell), ENTER (boot)...
/------------------------------------------------------------------------------\
/------------------------------------------------------------------------------\
/------------------------------------------------------------------------------\
/------------------------------------------------------------------------------\
/------------------------------------------------------------------------------\
/------------------------------------------------------------------------------\
Raspberry Pi 4 Model B
BCM2711 (ARM Cortex-A72) 1.50 GHz
UEFI Firmware v1.14 8192 MB RAM
> Console Preference Selection settings.
Select Language <Standard English> Continue
> Device Manager
> Boot Manager
> Boot Maintenance Manager
Continue
Reset
^v=Move Highlight <Enter>=Select Entry
Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 3200
recover4.elf not found
recovery.elf not found
Read start4.elf bytes 2274272 hnd 0x000000a5 hash a71eea9d75519554
Read fixup4.dat bytes 5407 hnd 0x00000065 hash e4ad9a0c1bb698cc
0x00d03114 0x00000000 0x0000001f
MEM GPU: 76 ARM: 948 TOTAL: 1024
FIXUP src: 128 256 dst: 948 1024
Starting start4.elf @ 0xfec00200
NOTICE: BL31: v2.3():v2.3------------------------------------\
NOTICE: BL31: Built : 10:40:51, Apr 21 2020t to apply it Now.|
UEFI firmware (version UEFI Firmware v1.14 built at 11:11:03 on Jun 9 2020)
\---------------------------------------------
ESC (setup), F1 (shell), ENTER (boot)...
Error: Could not detect network connection.
Error: Could not detect network connection.
Consoles: serial port
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk1p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Apr 30 07:14:13 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0x3383f000
EFI version: 2.70
EFI Firmware: https://github.com/pftf/RPi4 (rev 1.00)
Console: comconsole (0)
Load Path: \EFI\BOOT\BOOTAA64.EFI
Load Device: PcieRoot(0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(1,MBR,0x00000000,0x81F,0x18FA8)
BootCurrent: 0003
BootOrder: 0000 0001 0002 0004 0005 0006 0007 0003[*]
BootInfo Path: PcieRoot(0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/USB(0x0,0x0)/USB(0x3,0x0)
Ignoring Boot0003: Only one DP found
Trying ESP: PcieRoot(0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(1,MBR,0x00000000,0x81F,0x18FA8)
Setting currdev to disk1p1:
Trying: PcieRoot(0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(2,MBR,0x00000000,0x197C7,0x76DA839)
Setting currdev to disk1p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
|
Loading kernel...
/boot/kernel/kernel text=0xa4a694 data=0x190858 data=0x0+0x300c1e syms=[0x8+0x10d1d8+0x8+0x133437]
Loading configured modules...
/boot/entropy size=0x1000
/boot/kernel/umodem.ko text=0x1be0 text=0xfb0 data=0x618+0x8 syms=[0x8+0xe40+0x8+0xa8c]
/etc/hostid size=0x25
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
No valid device tree blob found!
WARNING! Trying to fire up the kernel, but no device tree blob found!
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #22 0e23fb5ef8e-c269204(master): Tue Jun 2 15:57:56 UTC 2020
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-rc1-0-gf79cd71e145)
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 1d0000 mode 2 pages 32
MAP 33940000 mode 2 pages 80
MAP 33a10000 mode 2 pages 128
MAP 33ab0000 mode 2 pages 128
MAP 37000000 mode 2 pages 400
MAP 37190000 mode 2 pages 592
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
acpi0: <RPIFDN RPI4>
acpi0: Power Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller> iomem 0xff841000-0xff841fff,0xff842000-0xff842fff on acpi0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
generic_timer0: <ARM Generic Timer> irq 15,16,17 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 0.000001s
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_syscontainer1: <System Container> on acpi0
xhci0: <Generic USB 3.0 controller> iomem 0x600000000-0x600000fff irq 0 on acpi0
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
uart0: <PrimeCell UART (PL011)> iomem 0xfe201000-0xfe201fff irq 11 on acpi0
uart0: console (115200,n,8,1)
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
Release APs...usbus0: 5.0Gbps Super Speed USB v3.0
done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Root mount waiting for: usbus0
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
Root mount waiting for: usbus0
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
mountroot: waiting for device /dev/ufs/rootfs...
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
Mounting from ufs:/dev/ufs/rootfs failed with error 19.
Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/rootfs
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot> xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
xhci0: Resetting controller
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub0: at usbus0, port 1, addr 1 (disconnected)
uhub0: detached
uhub0 on usbus0