Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-06-21 10:38:54
From: tsutsui
Description: NetBSD/i386 9.0 on CF-R1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Matsushita Electric Industrial Co.,Ltd. CF-R1MFA2S (004)
mainbus0 (root)
ACPI: RSDP 0x00000000000F7AD0 000014 (v00 PTLTD )
ACPI: RSDT 0x000000001F779C7B 00002C (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 0x000000001F77EF54 000084 (v02 MATBIO CFR1-4 06040000 MAT 00000001)
ACPI: DSDT 0x000000001F779CA7 0052AD (v01 MATBIO CFR1-4 06040000 MSFT 0100000E)
ACPI: FACS 0x000000001F77FFC0 000040
ACPI: BOOT 0x000000001F77EFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Mobile Intel(R) Pentium(R) III CPU - M 933MHz, id 0x6b4
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 5
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 5
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 5
LNKH: ACPI: Found matching pin for 1.5.INTA at func 0: 10
LNKD: ACPI: Found matching pin for 1.5.INTB at func 1: 7
LNKD: ACPI: Found matching pin for 1.1.INTA at func 0: 7
LNKE: ACPI: Found matching pin for 1.3.INTA at func 0: 10
LNKF: ACPI: Found matching pin for 1.3.INTB at func 1: 10
LNKG: ACPI: Found matching pin for 1.3.INTC at func 2: 11
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpivga0 at acpi0 (GRFX): ACPI Display Adapter
acpiout0 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD1, 0x0400): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0, bios detect
MBRD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MATH (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (K106, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU3, SYN0002) (aux port): irq 12
acpibut0 at acpi0 (PWRB, PNP0C0C-0): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BATA, PNP0C0A-0): ACPI Battery
HKEY (MAT0019) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D-0): ACPI Lid Switch
acpitz0 at acpi0 (TZC): cpu0
acpitz0: levels: critical 104.8 C, passive 92.8 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI: Enabled 1 GPEs in block 10 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Buttons 4/5, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3575 (rev. 0x04)
agp0 at pchb0: i830-family chipset
agp0: detected 8060k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 3577 (rev. 0x04)
vendor 8086 product 3577 (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: vendor 8086 product 2482 (rev. 0x02)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
ppb0 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x42)
pci1 at ppb0 bus 1
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
rtk0 at pci1 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 7
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci1 dev 3 function 0: vendor 1033 product 0035 (rev. 0x43)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb1 at ohci0: USB revision 1.0
ohci1 at pci1 dev 3 function 1: vendor 1033 product 0035 (rev. 0x43)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci0 at pci1 dev 3 function 2: vendor 1033 product 00e0 (rev. 0x04)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 1 port each: ohci0 ohci1
usb3 at ehci0: USB revision 2.0
cbb0 at pci1 dev 5 function 0: vendor 1180 product 0475 (rev. 0x88)
vendor 1180 product 0575 (miscellaneous system) at pci1 dev 5 function 1 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 10
cardslot0 at cbb0
cardbus0 at cardslot0: bus 2
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 248c (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2483 (rev. 0x02)
ichsmb0: interrupting at irq 5
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: SigmaTel STAC9756/57 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
auich0: ac97: ext id 0x205<AMAP,SPDIF,VRA>
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 1 us, pow 500 mW
acpicpu0: C3: I/O, lat 185 us, pow 100 mW
acpicpu0: P0: I/O, lat 250 us, pow 9427 mW, 933 MHz
acpicpu0: P1: I/O, lat 250 us, pow 4351 mW, 400 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47998 Hz, will use 48000 Hz
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpiacad0: AC adapter online.
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
acpicpu0: autoconfiguration error: failed to set frequency to 933 (err 35)
IPsec: Initialized Security Association Processing.
acpibat0: Panasonic LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: BUFFALO (0x411) USB Flash Disk (0x1f2), rev 2.10/a.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 1.00> disk removable
sd0: fabricating a geometry
sd0: 14738 MB, 14738 cyl, 64 head, 32 sec, 512 bytes/sect x 30183424 sectors
sd0: fabricating a geometry
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK2020GLP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 16002 MB, 32512 cyl, 16 head, 63 sec, 512 bytes/sect x 32772600 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
WARNING: 21 errors while detecting hardware; check system log.
boot device: wd0
root device (default wd0a): sd0a
dump device (default sd0b):
file system (default generic):
dumps on sd0b
root file system type: ffs
kern.module.path=/stand/i386/9.0/modules
kern info: [drm] Memory usable by graphics device = 128M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at irq 5 (i915drmkms0)
kern info: [drm] applying pipe a force quirk
kern info: [drm] applying pipe b force quirk
WARNING: clock gained 3 days
kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe B FIFO underrun
kern info: [drm] initialized overlay support
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xd8da2000, size 1024x768, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
init path (default /sbin/init):
init: trying /sbin/init