Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-06-29 00:10:48
From: mrg
Description: Tadpole Bullfrog Laptop
[ 1.000000] pool redzone disabled for 'kmem-08192' [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.68 (_bull_) #4: Sun Jun 28 16:57:02 PDT 2020 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/var/obj/sparc64/usr/src2/sys/arch/sparc64/compile/_bull_ [ 1.000000] total memory = 8192 MB [ 1.000000] avail memory = 8030 MB [ 1.000000] pool redzone disabled for 'buf64k' [ 1.000000] entropy: no seed from bootloader [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root): TAD,Viper (Tadpole Bullfrog): [_HOSTID_XXXXX] [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1200 MHz, CPU id 0 [ 1.000000] cpu0: manuf 3e, impl 16, mask 24 [ 1.000000] cpu0: system tick frequency 12 MHz [ 1.000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.000000] memory-controller at mainbus0 not configured [ 1.000000] schizo0 at mainbus0: addr 4000f600000: Tomatillo, version 4, ign 780, bus A 0 to 255 [ 1.000000] schizo0: pci0 at schizo0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ebus0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.000000] pckbc0 at ebus0 addr 60-67 ipl 2f ipl 2e ipl 2d: cnattach ok [ 1.000000] pckbd0 at pckbc0 (kbd slot) [ 1.000000] wskbd1 at pckbd0: console keyboard [ 1.000000] pms0 at pckbc0 (aux slot) [ 1.000000] wsmouse0 at pms0 mux 0 [ 1.000000] Tadpole PMU Version 1.26 [ 1.000000] com0 at ebus0 addr 3f8-3ff ipl 1c: ns16550a, working fifo [ 1.000000] flashprom at ebus0 addr 0-effff not configured [ 1.000000] clock0 at ebus0 addr f8000-f9fff: mk48t59 [ 1.000000] autoconfiguration error: ebus_attach: idprom: incomplete [ 1.000000] dma at ebus0 addr 0-ffff not configured [ 1.000000] O2 Micro OZ6912/OZ6972 PCI-CardBus Bridge (CardBus bridge) at pci0 dev 10 function 0 not configured [ 1.000000] autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02) [ 1.000000] autri0: interrupting at ivec 7a4 [ 1.000000] autri0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D [ 1.000000] audio0 at autri0: playback, capture, full duplex, independent [ 1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.000000] wsbell at spkr0 not configured [ 1.000000] midi0 at autri0: 4DWAVE MIDI UART [ 1.000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 1f86 for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] alipm0 at pci0 dev 6 function 0: 223KHz clock [ 1.000000] iic0 at alipm0: I2C bus [ 1.000000] TAD,ebut at iic0 addr 0x28 not configured [ 1.000000] beep at iic0 addr 0x59 not configured [ 1.000000] ohci0 at pci0 dev 2 function 0: NEC USB Host Controller (rev. 0x43) [ 1.000000] csr: 02100046 [ 1.000000] ohci0: interrupting at ivec 78c [ 1.000000] ohci0: OHCI version 1.0 [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ohci1 at pci0 dev 2 function 1: NEC USB Host Controller (rev. 0x43) [ 1.000000] csr: 02100046 [ 1.000000] ohci1: interrupting at ivec 78d [ 1.000000] ohci1: OHCI version 1.0 [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ehci0 at pci0 dev 2 function 2: NEC USB2 Host Controller (rev. 0x04) [ 1.000000] ehci0: interrupting at ivec 78e [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.000000] usb2 at ehci0: USB revision 2.0 [ 1.000000] esiop0 at pci0 dev 4 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi) [ 1.000000] esiop0: using on-board RAM [ 1.000000] esiop0: interrupting at ivec 1f82 [ 1.000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.000000] genfb0 at pci0 dev 19 function 0membase: 0 fbpa: 7ff03000000 [ 1.000000] : ATI Technologies Rage L Mobility (PCI) (rev. 0x64) [ 1.000000] genfb0: framebuffer at 0x3000000, size 1280x1024, depth 8, stride 1280 [ 1.000000] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd1 [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] wsdisplay0: screen 1-3 added (default, vt100 emulation) [ 1.000000] drm at genfb0 not configured [ 1.000000] ppm at mainbus0 not configured [ 1.000000] schizo1 at mainbus0: addr 4000ff00000: Tomatillo, version 4, ign 7c0, bus B 0 to 255 [ 1.000000] schizo1: pci1 at schizo1 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] bge0 at pci1 dev 3 function 0: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.000000] bge0: interrupting at ivec 37d0 [ 1.000000] bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.000000] bge0: ASIC BCM5704 A2 (0x2002), Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] bge1 at pci1 dev 3 function 1: Broadcom BCM5704C Dual Gigabit Ethernet [ 1.000000] bge1: interrupting at ivec 37df [ 1.000000] bge1: HW config 00000000, 00000000, 00000000, 00000000 00000000 [ 1.000000] bge1: ASIC BCM5704 A2 (0x2002), Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0 [ 1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] jbusi2c0 at mainbus0: addr 4000fc64000 [ 1.000000] iic1 at jbusi2c0: I2C bus [ 1.000000] spdmem0 at iic1 addr 0x54spdmem1 at iic1 addr 0x55 [ 1.000000] spdmem1: DDR SDRAM (registered), invalid parity, 520200GB, 125MHz (PC--16200) [ 1.000000] spdmem1: 15 rows, 15 cols, 255 ranks, 255 banks/chip, 15.10ns cycle time [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-4-4-16 [ 1.000000] spdmem1: voltage unknown, refresh time unknown (self-refreshing) [ 1.000000] spdmem2 at iic1 addr 0x56 [ 1.000000] spdmem2: DDR SDRAM (registered), invalid parity, 520200GB, 125MHz (PC--16200) [ 1.000000] spdmem2: 15 rows, 15 cols, 255 ranks, 255 banks/chip, 15.10ns cycle time [ 1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 3-4-4-16 [ 1.000000] spdmem2: voltage unknown, refresh time unknown (self-refreshing) [ 1.000000] spdmem3 at iic1 addr 0x57pcons at mainbus0 not configured [ 1.000000] entropy: WARNING: extracting entropy too early [ 1.000000] cpu0 has 1 core siblings: cpu0 [ 1.000000] cpu0 has 1 pkg siblings: cpu0 [ 1.000000] cpu0 has 1 1st siblings: cpu0 [ 1.000000] cpu0 first in package: cpu0 [ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] timecounter: Timecounter "tick-counter" frequency 1200000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200 [ 1.000019] No counter-timer -- using %stick at 12MHz as system clock. [ 1.055859] scsibus0: waiting 2 seconds for devices to settle... [ 1.121620] atapibus0 at atabus1: 2 targets [ 1.175848] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.241370] uhub0: 3 ports with 3 removable, self powered [ 1.241370] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.302293] uhub1: 2 ports with 2 removable, self powered [ 1.302293] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.363265] uhub2: 5 ports with 5 removable, self powered [ 1.363265] cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW242C, , UQ81> cdrom removable [ 1.445850] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 1.445850] cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 5.515845] cgd: self-test aes-xts-256 [ 5.515845] cgd: self-test aes-xts-512 [ 5.515845] cgd: self-test aes-cbc-128 [ 5.515845] cgd: self-test aes-cbc-256 [ 5.515845] cgd: self-test 3des-cbc-192 [ 5.515845] cgd: self-test blowfish-cbc-448 [ 5.515845] cgd: self-test aes-cbc-128 (encblkno8) [ 5.515845] cgd: self-tests passed [ 5.515845] WARNING: 1 error while detecting hardware; check system log. [ 5.579717] root on bge0 [ 5.629562] mountroot: trying lfs... [ 5.680866] mountroot: trying ffs... [ 5.732184] mountroot: trying ext2fs... [ 5.783913] mountroot: trying nfs... [ 5.835251] nfs_boot: trying DHCP/BOOTP [ 30.151210] root time: 0x5ef92ffc [ 30.202168] root file system type: nfs [ 30.253783] kern.module.path=/stand/sparc64/9.99.68/modules [ 30.308490] init path (default /sbin/init): [ 30.829814] init: copying out path `/sbin/init' 11