Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-07-10 14:13:01
From: @nrgmilk_
Description: PinePhone v1.1 Braveheart, FreeBSD 13.0-CURRENT r363078 arm64
U-Boot SPL 2020.07 (Jul 10 2020 - 22:30:20 +0900)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.3():
NOTICE: BL31: Built : 22:30:18, Jul 10 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4091658, model: Pine64 LTS
NOTICE: PSCI: System suspend is unavailable
alloc space exhausted
U-Boot 2020.07 (Jul 10 2020 - 22:30:20 +0900) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64 LTS
DRAM: 2 GiB
MMC: mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial
Out: serial
Err: serial
Net: phy interface7
Could not get PHY for ethernet@1c30000: addr 1
No ethernet found.
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
38963 bytes read in 5 ms (7.4 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Scanning disk [_EMAIL_XXXXXX]...
** Unrecognized filesystem type **
Scanning disk [_EMAIL_XXXXXX]...
Found 6 disks
phy interface7
mdio_register: non unique device name 'ethernet@1c30000'
Could not get PHY for ethernet@1c30000: addr 1
BootOrder not defined
EFI boot manager: Cannot load any image
695088 bytes read in 33 ms (20.1 MiB/s)
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jul 2 07:19:56 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0xb8e69000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.1792)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(1)/HD(1,0x01,0,0x81f,0x1afa6)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(1)/HD(1,0x01,0,0x81f,0x1afa6)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(1)/HD(2,0x01,0,0x1b7c5,0x76d883b)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
\
Loading kernel...
/boot/kernel/kernel text=0x9cd10c data=0x1977d8 data=0x0+0x3a15de syms=[0x8+0x115530+0x8+0x13aa2a]
Loading configured modules...
/etc/hostid size=0x25
/boot/entropy size=0x1000
/boot/kernel/umodem.ko text=0x2100 text=0x1390 data=0x6e0+0x10 syms=[0x8+0xf48+0x8+0xb6e]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x47ef3000.
Loading DTB overlays: 'sun50i-a64-timer,sun50i-a64-opp'
/boot/dtb/overlays/sun50i-a64-timer.dtbo size=0x175
/boot/dtb/overlays/sun50i-a64-opp.dtbo size=0x74f
applying DTB overlay '/boot/dtb/overlays/sun50i-a64-timer.dtbo'
applying DTB overlay '/boot/dtb/overlays/sun50i-a64-opp.dtbo'
EHCI failed to shut down host controller.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #2 r363078: Fri Jul 10 22:36:08 JST 2020
[_EMAIL_XXXXXX]:/usr/obj/z2/src/head/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 10.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
module_register: cannot register simplebus/gpio from kernel; already loaded from kernel
Module simplebus/gpio failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
Module simplebus/pcib failed to register: 17
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP b8f19000 mode 2 pages 1
MAP b8f1c000 mode 2 pages 2
MAP bdf50000 mode 2 pages 16
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 56,57 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 51 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 23,24,25 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
aw_nmi0: <Allwinner NMI Controller> mem 0x1f00c00-0x1f00fff irq 58 on simplebus0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 61 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 8,9 on simplebus0
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
iichb0: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 62 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 64 on iicbus0
gpiobus2: <OFW GPIO bus> on axp8xx_pmu0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpufreq_dt1: <Generic cpufreq driver> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpufreq_dt2: <Generic cpufreq driver> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpufreq_dt3: <Generic cpufreq driver> on cpu3
a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 10 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 14 on simplebus0
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 16 on simplebus0
ehci0: <Generic EHCI Controller> mem 0x1c1a000-0x1c1a0ff irq 19 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 20 on simplebus0
usbus1 on ohci0
ehci1: <Generic EHCI Controller> mem 0x1c1b000-0x1c1b0ff irq 21 on simplebus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 22 on simplebus0
usbus3 on ohci1
gpioc0: <GPIO controller> on gpio0
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 32 on simplebus0
uart0: console (115384,n,8,1)mem 0x1c28000-0x1c283ff irq 33 on simplebus0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 43 on simplebus0
awg0: soft reset timed out
device_attach: awg0 attach returned 60
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on axp8xx_pmu0
iic0: <I2C generic I/O> on iicbus0
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 63 on simplebus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Root mount waiting for: usbus0 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
usbus1 Instruction Set Attributes 1 = <>
usbus2 usbus3
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
ugen3.1: <Generic OHCI root HUB> at usbus3
ugen0.1: <Generic EHCI root HUB> at usbus0
ugen1.1: <Generic OHCI root HUB> at usbus1
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub0 on usbus3
uhub1 on usbus2
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2 on usbus1
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub3 on usbus0
uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
mmc0: <MMC/SD bus> on aw_mmc1
aw_mmc1: Cannot set vqmmc to 3300000<->3300000
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_DATA_END_BIT_ERR
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
aw_mmc1: Cannot set vqmmc to 3300000<->3300000
mmc0: Failed to set VCCQ for card at relative address 2
mmcsd0: 16GB <MMCHC 1.4 SN 253079D4 MFG 07/2019 by 225 0x0016> at mmc0 52.0MHz/8bit/4096-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 4MB partition 3 at mmcsd0
mmc1: <MMC/SD bus> on aw_mmc0
mmcsd1: 64GB <SDHC SR64G 8.0 SN 16125423 MFG 10/2019 by 3 SD> at mmc1 50.0MHz/4bit/32768-block
mmc1: Failed to set VCCQ for card at relative address 43690
uhub3: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/ufs/rootfs...
Setting hostuuid: 30633239-3563-6162-3966-346337383836.
Setting hostid: 0x60e5c015.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 14404667 free (427 frags, 1800530 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Building /boot/kernel/linker.hints
Autoloading module: aw_spi.ko
Autoloading module: if_awg.ko
module_register: cannot register simplebus/awg from if_awg.ko; already loaded from kernel
Module simplebus/awg failed to register: 17
module_register: cannot register awg/miibus from if_awg.ko; already loaded from kernel
Module awg/miibus failed to register: 17
aw_spi0: <Allwinner SPI> mem 0x1c68000-0x1c68fff irq 41 on simplebus0
spibus0: <OFW SPI bus> on aw_spi0
spibus0: <unknown card> at cs 0 mode 0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 43 on simplebus0
awg0: cannot allocate resources for device
device_attach: awg0 attach returned 6
Setting hostname: generic.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Starting devd.
Autoloading module: aw_spi.ko
Autoloading module: mx25l.ko
warning: KLD '/boot/kernel/fdt_slicer.ko' is newer than the linker.hints file
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: Unknown SPI flash device. Vendor: 00, device id: 0000
device_attach: mx25l0 attach returned 6
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Updating /var/run/os-release done.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Fri Jan 1 00:00:39 UTC 2010
FreeBSD/arm64 (generic) (ttyu0)
login: