Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-07-23 22:47:59
From: rvp
Description: NetBSD/amd64 on ASUSTeK COMPUTER INC. X202E
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0_STABLE (GENERIC) #0: Mon Jul 20 18:35:18 UTC 2020
	xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3981 MB
avail memory = 3839 MB
WARNING: module error: module `msdos' pushed by boot loader already exists
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x1
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa da11ef18
ASUSTeK COMPUTER INC. X202E (1.0       )
mainbus0 (root)
ACPI: RSDP 0x00000000DA872000 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000DA872090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 0x00000000DA883E10 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 0x00000000DA8721C0 011C50 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
ACPI: FACS 0x00000000DA89C080 000040
ACPI: APIC 0x00000000DA883F20 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 0x00000000DA883F98 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x00000000DA883FE0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x00000000DA8840A8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000DA8840E8 000A3C (v01 DptfTa DptfTab  00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA884B28 000CA5 (v01 SADptf SADptf_  00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA8857D0 000098 (v01 PchDpt PchDptf  00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA885868 00091C (v01 CfgTDP CfgTDP_  00001000 INTL 20091112)
ACPI: HPET 0x00000000DA886188 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA8861C0 0004A0 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA886660 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA886B00 0008C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000DA8873C8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000DA887E60 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
ACPI: MSDM 0x00000000DA61EE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, id 0x306a9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, id 0x306a9
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz, id 0x306a9
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <_ASUS_,Notebook,01072009>, AslId <AMI ,00010013>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI Error: Needed type [Reference], found [Integer] 0xffff9643efc480f0 (20190405/exresop-114)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20190405/dswexec-500)
ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190405/psparse-581)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9643EFBDA408 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9643EFBE9388 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): using acpiecdt0
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
ADBG (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2M, ETD0108) (aux port): irq 12
pckbc2 at acpi0 (PS2K, ATK3001) (kbd port): io 0x60,0x64 irq 1
TFN1 (INT3404) at acpi0 not configured
TSKN (INT3403) at acpi0 not configured
TAMB (INT3403) at acpi0 not configured
T_VR (INT3403) at acpi0 not configured
TEFN (INT3403) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCDD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
TMEM (INT3402) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (ATKD, PNP0C14-ATK): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ASHS (ATK4001) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
IETM (INT3400) at acpi0 not configured
acpitz0 at acpi0 (THRM): cpu0 cpu1 cpu2 cpu3
acpitz0: levels: critical 108.0 C, passive 110.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09)
vendor 8086 product 0153 (miscellaneous DASP, revision 0x09) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 1106 product 8446
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 48000Hz PCM16*
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 168c product 0032 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3: vendor 8086 product 1e16 (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci3 dev 0 function 0: Atheros AR8162 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 19
alc0: Ethernet address xx:xx:xx:xx:xx:xx
atphy0 at alc0 phy 0: Atheros AR8035 10/100/1000 PHY, rev. 9
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e59 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi2 vec 0
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
vendor 8086 product 1e24 (miscellaneous DASP, revision 0x04) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9643EFE5C008 000853 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  80 us, pow   350 mW
acpicpu0: P0: FFH, lat  10 us, pow 17000 mW, 1801 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 17000 mW, 1800 MHz
acpicpu0: P2: FFH, lat  10 us, pow 15798 mW, 1700 MHz
acpicpu0: P3: FFH, lat  10 us, pow 14620 mW, 1600 MHz
acpicpu0: P4: FFH, lat  10 us, pow 13631 mW, 1500 MHz
acpicpu0: P5: FFH, lat  10 us, pow 12499 mW, 1400 MHz
acpicpu0: P6: FFH, lat  10 us, pow 11552 mW, 1300 MHz
acpicpu0: P7: FFH, lat  10 us, pow 10467 mW, 1200 MHz
acpicpu0: P8: FFH, lat  10 us, pow  9560 mW, 1100 MHz
acpicpu0: P9: FFH, lat  10 us, pow  8518 mW, 1000 MHz
acpicpu0: P10: FFH, lat  10 us, pow  7651 mW,  900 MHz
acpicpu0: P11: FFH, lat  10 us, pow  6652 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1796015520 Hz quality 3000
acpiacad0: AC adapter online.
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
acpibat0: ASUSTek LIon rechargeable battery
acpibat0: granularity: low->warn 0.377 Wh, warn->full 0.377 Wh
ahcisata0 port 0: device present, speed: 3.0Gb/s
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB-PS/2 Optical Mouse (0xc03d), rev 2.00/20.00, addr 1, iclass 3/1
wd0 at atabus0 drive 0
ums0 at uhidev0: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
wd0: <ST500LT012-9WS142>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors (0 bytes/physsect; first aligned sector: 8)
wd0: GPT GUID: a6e9090d-b5ab-412a-8568-2eee08fa3fa8
dk0 at wd0: "EFI", 614400 blocks at 2048, type: msdos
dk1 at wd0: "Basic data partition", 1228800 blocks at 616448, type: <unknown>
dk2 at wd0: "Microsoft reserved partition", 262144 blocks at 1845248, type: <unknown>
dk3 at wd0: "FreeBSD EFI", 8192 blocks at 2107392, type: msdos
dk4 at wd0: "Ubuntu swap", 8388608 blocks at 376039424, type: <unknown>
dk5 at wd0: "Ubuntu 19.04", 592343040 blocks at 384428032, type: ext2fs
dk6 at wd0: "FreeBSD 12.1", 104857600 blocks at 2115584, type: ffs
dk7 at wd0: "FreeBSD swap", 8388608 blocks at 106973184, type: swap
dk8 at wd0: "NetBSD_EFI", 16384 blocks at 115363840, type: msdos
dk9 at wd0: "NetBSD_9.0", 41943040 blocks at 115380224, type: ffs
dk10 at wd0: "NetBSD_swap", 10485760 blocks at 157323264, type: swap
dk11 at wd0: "Linux filesystem", 20971520 blocks at 167809024, type: ext2fs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ubt0 at uhub4 port 1
ubt0: Atheros Communications (0x4ca) Bluetooth USB Host Controller (0x3005), rev 1.10/0.01, addr 3
uvideo0 at uhub4 port 2 configuration 1 interface 0: Azurewave (0x13d3) USB2.0 UVC HD Webcam (0x5188), rev 2.00/8.14, addr 4
video0 at uvideo0: Azurewave (0x13d3) USB2.0 UVC HD Webcam (0x5188), rev 2.00/8.14, addr 4
uhidev1 at uhub4 port 3 configuration 1 interface 0
uhidev1: Atmel (0x3eb) Atmel maXTouch Digitizer (0x8417), rev 2.00/11.32, addr 5, iclass 3/0
uhidev1: 5 report ids
uts0 at uhidev1 reportid 1
uts0: autoconfiguration error: touchscreen has no range report
uhid0 at uhidev1 reportid 2: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 3: input=10, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=256
uhidev2 at uhub4 port 3 configuration 1 interface 1
uhidev2: Atmel (0x3eb) Atmel maXTouch Digitizer (0x8417), rev 2.00/11.32, addr 5, iclass 3/0
uhidev2: 2 report ids
uhid3 at uhidev2 reportid 1: input=63, output=63, feature=0
uhid4 at uhidev2 reportid 2: input=63, output=63, feature=0
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on dk9 dumps on dk7
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 2048M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffff968067ede000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)