Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-08-10 00:02:37
From: thirdm
Description: NetBSD/amd64 9.0 on HP EliteBook 8440p w/ NVIDIA GT218 (nouveau, noaccel)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3957 MB
avail memory = 3819 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0xa6<clock_battery,config_unit,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP EliteBook 8440p ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000F2AA0 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BF7FE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BF7FC000 0000F4 (v03 HPQOEM 172B 0000000F HP 00000001)
ACPI: DSDT 0x00000000BF7D7000 01FE0F (v02 HPQOEM 172B 00000001 INTL 20060912)
ACPI: FACS 0x00000000BF760000 000040
ACPI: HPET 0x00000000BF7FB000 000038 (v01 HPQOEM 172B 00000001 HP 00000001)
ACPI: APIC 0x00000000BF7FA000 0000BC (v01 HPQOEM 172B 00000001 HP 00000001)
ACPI: MCFG 0x00000000BF7F9000 00003C (v01 HPQOEM 172B 00000001 HP 00000001)
ACPI: TCPA 0x00000000BF7F7000 000032 (v02 HPQOEM 172B 00000000 HP 00000001)
ACPI: SSDT 0x00000000BF7D4000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 0x00000000BF7D3000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 0x00000000BF7D2000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: DMAR 0x00000000BF7D1000 000080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 0x00000000BF7D0000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BF7CF000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BF7CE000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 0x00000000BF7F8000 0000A0 (v32 HPQOEM 172B 00000001 HP 00000001)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20652
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20652
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20652
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 5
cpu3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20652
cpu3: package 0, core 2, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF9C706014008 0003F9 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF9C705FF5008 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF9C705F34808 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF9C705E7EE88 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (DGFX): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x8000a450): ACPI Display Output Device
acpiout0: brightness levels: [0,5,10,15,20,25,30,33,36,40,43,46,50,55,60,65,70,75,80,83,86,90,93,96,100]
acpiout1 at acpivga0 (CRT, 0x80000100): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x80004210): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x80006330): ACPI Display Output Device
acpiout4 at acpivga0 (DD04, 0x80006320): ACPI Display Output Device
acpiout5 at acpivga0 (DD05, 0x80006340): ACPI Display Output Device
acpiout6 at acpivga0 (DD06, 0x80002330): ACPI Display Output Device
acpiout7 at acpivga0 (DD07, 0x80002320): ACPI Display Output Device
acpiout8 at acpivga0 (DD08, 0x80002340): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout8
acpivga0: connected output devices:
acpivga0: 0xa450 (acpiout0): Int. Digital Flat Panel, index 0, port 5, head 0
acpivga0: 0x0100 (acpiout1): VGA Analog Monitor, index 0, port 0, head 0
acpivga0: 0x6330 (acpiout3): Ext. Digital Monitor, index 0, port 3, head 0
acpivga0: 0x6320 (acpiout4): Ext. Digital Monitor, index 0, port 2, head 0
acpivga0: 0x2330 (acpiout6): Ext. Digital Monitor, index 0, port 3, head 0
acpivga0: 0x2320 (acpiout7): Ext. Digital Monitor, index 0, port 2, head 0
FWHD (INT0800) at acpi0 not configured
GTPM (IFX0102) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
LPT0 (PNP0401) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0165) (aux port): irq 12
ACEL (HPQ0004) at acpi0 not configured
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpidalb0 at acpi0 (HST1, PNP0C32-1): Direct Application Launch Button
acpiwmi1 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi1: HP WMI mappings
acpitz0 at acpi0 (EXTZ)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (EX2Z)
acpitz1: levels: critical 127.0 C, passive cooling
acpitz2 at acpi0 (PWMZ)
acpitz2: levels: critical 128.0 C, passive cooling
acpitz3 at acpi0 (LOCZ)
acpitz3: levels: critical 127.0 C, passive cooling
acpitz4 at acpi0 (GFXZ)
acpitz4: levels: critical 115.0 C, passive cooling
acpitz5 at acpi0 (BATZ): cpu0 cpu1 cpu2 cpu3
acpitz5: levels: critical 128.0 C, passive 55.0 C, passive cooling
acpitz6 at acpi0 (EGXZ): cpu0 cpu1 cpu2 cpu3
acpitz6: levels: critical 128.0 C, passive 102.0 C, passive cooling
acpitz7 at acpi0 (CPUZ)
acpitz7: levels: critical 128.0 C, passive cooling
acpitz8 at acpi0 (MCHZ)
acpitz8: levels: critical 128.0 C, passive cooling
acpitz9 at acpi0 (PCHZ)
acpitz9: levels: critical 128.0 C, passive cooling
PTID (INT340E) at acpi0 not configured
ACPI: Enabled 5 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0044 (rev. 0x12)
agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0045 (rev. 0x12)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: vendor 10de product 0a6c (rev. 0xa2)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 10de product 000b
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
hdafg1 at hdaudio0: vendor 10de product 000b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
hdafg2 at hdaudio0: vendor 10de product 000b
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz PCM16*
hdafg3 at hdaudio0: vendor 10de product 000b
hdafg3: DP00 8ch: Digital Out [Jack]
hdafg3: 8ch/0ch 48000Hz PCM16*
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 5 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x6050, interrupting at ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller (rev. 0x06)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.12.3
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x2a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdafg4 at hdaudio1: vendor 111d product 7603
hdafg4: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg4: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg4: DAC02 2ch: HP Out [Jack]
hdafg4: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg4: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdvsmfg at hdaudio1 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 3b44 (rev. 0x06)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 8086 product 3b48 (rev. 0x06)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 68
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci4 dev 0 function 0: vendor 8086 product 4239 (rev. 0x35)
iwn0: interrupting at msi3 vec 0
iwn0: MIMO 2T2R, MoW, address [_MAC_XXXXXXXXXX]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xa6)
pci5 at ppb4 bus 69
pci5: i/o space, memory space enabled
fwohci0 at pci5 dev 6 function 0: vendor 1180 product 0832 (rev. 0x06)
fwohci0: interrupting at ioapic0 pin 20
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:33:44
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci5 dev 6 function 1: vendor 1180 product 0822 (rev. 0x25)
sdhc0: interrupting at ioapic0 pin 22
sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product 0843 (miscellaneous system, revision 0x14) at pci5 dev 6 function 2 not configured
cbb0 at pci5 dev 6 function 3: vendor 1180 product 0476 (rev. 0xbb)
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 22
cardslot0 at cbb0
cardbus0 at cardslot0: bus 70
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b07 (rev. 0x06)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3b2f (rev. 0x06)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xef20ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi4 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 4
atabus4 at ahcisata0 channel 5
vendor 8086 product 3b32 (miscellaneous DASP, revision 0x06) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x000b15d1 rev 0x10
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
pci6 at mainbus0 bus 255
pci6: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci6 dev 0 function 0: vendor 8086 product 2c62 (rev. 0x02)
pchb2 at pci6 dev 0 function 1: vendor 8086 product 2d01 (rev. 0x02)
pchb3 at pci6 dev 2 function 0: vendor 8086 product 2d10 (rev. 0x02)
pchb4 at pci6 dev 2 function 1: vendor 8086 product 2d11 (rev. 0x02)
pchb5 at pci6 dev 2 function 2: vendor 8086 product 2d12 (rev. 0x02)
pchb6 at pci6 dev 2 function 3: vendor 8086 product 2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 3 us, pow 1000 mW
acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2400 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 25000 mW, 2399 MHz
acpicpu0: P2: FFH, lat 10 us, pow 23586 mW, 2266 MHz
acpicpu0: P3: FFH, lat 10 us, pow 22219 mW, 2133 MHz
acpicpu0: P4: FFH, lat 10 us, pow 20898 mW, 1999 MHz
acpicpu0: P5: FFH, lat 10 us, pow 19566 mW, 1866 MHz
acpicpu0: P6: FFH, lat 10 us, pow 18297 mW, 1733 MHz
acpicpu0: P7: FFH, lat 10 us, pow 17034 mW, 1599 MHz
acpicpu0: P8: FFH, lat 10 us, pow 15817 mW, 1466 MHz
acpicpu0: P9: FFH, lat 10 us, pow 14617 mW, 1333 MHz
acpicpu0: P10: FFH, lat 10 us, pow 13450 mW, 1199 MHz
acpicpu0: T0: FFH, lat 1 us, pow 13450 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 11768 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10087 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8406 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 6725 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5043 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3362 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1681 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394213810 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
pcmcia0: card appears to have bogus CIS
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK7559GSXF>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRAM GT30L, KZKA57A1639, mP04> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0020 (0x20), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhub4 at uhub3 port 1: Chicony (0x472) Generic USB Hub (0x65), class 9/0, rev 1.10/1.00, addr 3
ugen0 at uhub2 port 3
ugen0: vendor 138a (0x138a) product 0007 (0x07), rev 1.10/0.72, addr 3
uhub4: 3 ports with 2 removable, bus powered
uvideo0 at uhub2 port 5 configuration 1 interface 0: Chicony Electronics Co., Ltd. (0x4f2) HP Webcam [2 MP Macro] (0xb15e), rev 2.00/85.54, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. (0x4f2) HP Webcam [2 MP Macro] (0xb15e), rev 2.00/85.54, addr 4
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Chicony (0x472) PFU-65 USB Keyboard (0x65), rev 1.10/1.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
uhidev1 at uhub4 port 2 configuration 1 interface 0
uhidev1: vendor 04b3 (0x4b3) product 3108 (0x3108), rev 1.10/10.00, addr 5, iclass 3/1
ums0 at uhidev1: 3 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
urndis0 at uhub3 port 2 configuration 1 interface 0
urndis0: SAMSUNG (0x4e8) SAMSUNG_Android (0x6863), rev 2.00/ff.ff, addr 6
urndis0: Ethernet address [_MAC_XXXXXXXXXX]
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
nouveau0: info: NVIDIA GT218 (0a8600a2)
nouveau0: info: bios: version[_IP_XXXXXX].0c
nouveau0: info: fb: 512 MiB DDR3
Zone kernel: Available graphics memory: 1107216 kiB
nouveau0: info: DRM: VRAM: 512 MiB
nouveau0: info: DRM: GART: 1048576 MiB
nouveau0: info: DRM: TMDS table version 2.0
nouveau0: info: DRM: DCB version 4.0
nouveau0: info: DRM: DCB outp 00: 048003b6 0f200014
nouveau0: info: DRM: DCB outp 01: 02011300 00000000
nouveau0: info: DRM: DCB outp 02: 028223a6 0f220010
nouveau0: info: DRM: DCB outp 03: 02022362 00020010
nouveau0: info: DRM: DCB outp 04: 088333c6 0f220010
nouveau0: info: DRM: DCB outp 05: 08033382 00020010
nouveau0: info: DRM: DCB conn 00: 00002047
nouveau0: info: DRM: DCB conn 01: 00000100
nouveau0: info: DRM: DCB conn 02: 00101246
nouveau0: info: DRM: DCB conn 03: 00210346
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
nouveau0: info: DRM: MM: using COPY for buffer copies
nouveaufb0 at nouveau0
nouveaufb0: framebuffer at 0xffffa60067e20000, size 1366x768, depth 32, stride 5632
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
nouveau0: autoconfiguration error: error: disp: ERROR 5 [INVALID_STATE] 0b [] chid 1 mthd 0080 data 00000000
nouveau0: info: disp: Base 1:
nouveau0: info: disp: 0084: 00000000
nouveau0: info: disp: 0088: 00000000
nouveau0: info: disp: 008c: 00000000
nouveau0: info: disp: 0090: 00000000
nouveau0: info: disp: 0094: 00000000 -> f0000000
nouveau0: info: disp: 00a0: 00000000
nouveau0: info: disp: 00a4: 00000000
nouveau0: info: disp: 00c0: 00000000 -> ffff0000
nouveau0: info: disp: 00c4: 00000000
nouveau0: info: disp: 00c8: 00000000
nouveau0: info: disp: 00cc: 00000000
nouveau0: info: disp: 00e0: 00000000 -> 40000000
nouveau0: info: disp: 00e4: 00000000
nouveau0: info: disp: 00e8: 00000000
nouveau0: info: disp: 00ec: 00000000
nouveau0: info: disp: 00fc: 00000000
nouveau0: info: disp: 0100: fffe0000
nouveau0: info: disp: 0104: 00000000
nouveau0: info: disp: 0110: 00000000
nouveau0: info: disp: 0114: 00000000
nouveau0: info: disp: Base 1 - Image 0:
nouveau0: info: disp: 0800: 00000000 -> 00000700
nouveau0: info: disp: 0804: 00000000
nouveau0: info: disp: 0808: 00000000 -> 03000556
nouveau0: info: disp: 080c: 00000000 -> 00101600
nouveau0: info: disp: 0810: 0000e900 -> 0000cf00
nouveau0: info: disp: Base 1 - Image 1:
nouveau0: info: disp: 0c00: 00000000 -> 00000700
nouveau0: info: disp: 0c04: 00000000
nouveau0: info: disp: 0c08: 00000000 -> 03000556
nouveau0: info: disp: 0c0c: 00000000 -> 00101600
nouveau0: info: disp: 0c10: 0000e900 -> 0000cf00
WARNING: ZFS on NetBSD is under development
ZFS filesystem version: 5
nouveau0: autoconfiguration error: error: disp: outp 00:0006:0344: link not trained before attach
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)